Part of a series on
Continuum mechanics
${\displaystyle J=-D{\frac {d\varphi }{dx}}}$ Fick's laws of diffusion
Laws Conservations Mass Momentum Energy Inequalities Clausius–Duhem (entropy)
Solid mechanics Deformation Elasticity linear Plasticity Hooke's law Stress Strain Finite strain Infinitesimal strain Compatibility Bending Contact mechanics frictional Material failure theory Fracture mechanics
Fluid mechanics Fluids Statics · Dynamics Archimedes' principle · Bernoulli's principle Navier–Stokes equations Poiseuille equation · Pascal's law Viscosity (Newtonian · non-Newtonian) Buoyancy · Mixing · Pressure Liquids Adhesion Capillary action Chromatography Cohesion (chemistry) Surface tension Gases Atmosphere Boyle's law Charles's law Combined gas law Fick's law Gay-Lussac's law Graham's law Plasma
Rheology Viscoelasticity Rheometry Rheometer Smart fluids Electrorheological Magnetorheological Ferrofluids
Scientists Bernoulli Boyle Cauchy Charles Euler Fick Gay-Lussac Graham Hooke Newton Navier Noll Pascal Stokes Truesdell

The Bresler–Pister yield criterion^[1] is a function that was originally devised to predict the strength of concrete under multiaxial stress states. This yield criterion is an extension of the Drucker–Prager yield criterion and can be expressed on terms of the stress invariants as

${\displaystyle {\sqrt {J_{2}}}=A+B~I_{1}+C~I_{1}^{2}}$

where ${\displaystyle I_{1}}$ is the first invariant of the Cauchy stress, ${\displaystyle J_{2}}$ is the second invariant of the deviatoric part of the Cauchy stress, and ${\displaystyle A,B,C}$ are material constants.

Yield criteria of this form have also been used for polypropylene^[2] and polymeric foams.^[3]

The parameters ${\displaystyle A,B,C}$ have to be chosen with care for reasonably shaped yield surfaces. If ${\displaystyle \sigma _{c}}$ is the yield stress in uniaxial compression, ${\displaystyle \sigma _{t}}$ is the yield stress in uniaxial tension, and ${\displaystyle \sigma _{b}}$ is the yield stress in biaxial compression, the parameters can be expressed as

${\displaystyle {\begin{aligned}B=&\left({\cfrac {\sigma _{t}-\sigma _{c}}{{\sqrt {3}}(\sigma _{t}+\sigma _{c})}}\right)\left({\cfrac {4\sigma _{b}^{2}-\sigma _{b}(\sigma _{c}+\sigma _{t})+\sigma _{c}\sigma _{t}}{4\sigma _{b}^{2}+2\sigma _{b}(\sigma _{t}-\sigma _{c})-\sigma _{c}\sigma _{t}}}\right)\\C=&\left({\cfrac {1}{{\sqrt {3}}(\sigma _{t}+\sigma _{c})}}\right)\left({\cfrac {\sigma _{b}(3\sigma _{t}-\sigma _{c})-2\sigma _{c}\sigma _{t}}{4\sigma _{b}^{2}+2\sigma _{b}(\sigma _{t}-\sigma _{c})-\sigma _{c}\sigma _{t}}}\right)\\A=&{\cfrac {\sigma _{c}}{\sqrt {3}}}+B\sigma _{c}-C\sigma _{c}^{2}\end{aligned}}}$

Derivation of expressions for parameters A, B, C

The Bresler–Pister yield criterion in terms of the principal stresses ${\displaystyle \sigma _{1},\sigma _{2},\sigma _{3}}$ is ${\displaystyle {\cfrac {1}{\sqrt {6}}}\left[(\sigma _{1}-\sigma _{2})^{2}+(\sigma _{2}-\sigma _{3})^{2}+(\sigma _{3}-\sigma _{1})^{2}\right]^{1/2}-A-B~(\sigma _{1}+\sigma _{2}+\sigma _{3})-C~(\sigma _{1}+\sigma _{2}+\sigma _{3})^{2}=0~.}$ If ${\displaystyle \sigma _{t}=\sigma _{1}}$ is the yield stress in uniaxial tension, then ${\displaystyle {\cfrac {1}{\sqrt {3}}}~\sigma _{t}-A-B\sigma _{t}-C\sigma _{t}^{2}=0~.}$ If ${\displaystyle -\sigma _{c}=\sigma _{1}}$ is the yield stress in uniaxial compression, then ${\displaystyle {\cfrac {1}{\sqrt {3}}}~\sigma _{c}-A+B\sigma _{c}-C\sigma _{c}^{2}=0~.}$ If ${\displaystyle -\sigma _{b}=\sigma _{1}=\sigma _{2}}$ is the yield stress in equibiaxial compression, then ${\displaystyle {\cfrac {1}{\sqrt {3}}}~\sigma _{b}-A+2B\sigma _{b}-4C\sigma _{b}^{2}=0~.}$ Solving these three equations for ${\displaystyle A,B,C}$ (using Maple) gives us ${\displaystyle {\begin{aligned}A:=&{\cfrac {1}{\sqrt {3}}}~{\cfrac {\sigma _{c}\sigma _{t}\sigma _{b}(\sigma _{t}+8\sigma _{b}-3\sigma _{c})}{(\sigma _{c}+\sigma _{t})(2\sigma _{b}-\sigma _{c})(2\sigma _{b}+\sigma _{t})}}\\B:=&{\cfrac {1}{\sqrt {3}}}~{\cfrac {(\sigma _{c}-\sigma _{t})(\sigma _{b}\sigma _{c}+\sigma _{b}\sigma _{t}-\sigma _{c}\sigma _{t}-4\sigma _{b}^{2})}{(\sigma _{c}+\sigma _{t})(2\sigma _{b}-\sigma _{c})(2\sigma _{b}+\sigma _{t})}}\\C:=&{\cfrac {1}{\sqrt {3}}}~{\cfrac {3\sigma _{b}\sigma _{t}-\sigma _{b}\sigma _{c}-2\sigma _{c}\sigma _{t}}{(\sigma _{c}+\sigma _{t})(2\sigma _{b}-\sigma _{c})(2\sigma _{b}+\sigma _{t})}}\end{aligned}}}$

Figure 1: View of the three-parameter Bresler–Pister yield surface in 3D space of principal stresses for ${\displaystyle \sigma _{c}=1,\sigma _{t}=0.3,\sigma _{b}=1.7}$	Figure 2: The three-parameter Bresler–Pister yield surface in the ${\displaystyle \pi }$-plane for ${\displaystyle \sigma _{c}=1,\sigma _{t}=0.3,\sigma _{b}=1.7}$	Figure 3: Trace of the three-parameter Bresler–Pister yield surface in the ${\displaystyle \sigma _{1}-\sigma _{2}}$-plane for ${\displaystyle \sigma _{c}=1,\sigma _{t}=0.3,\sigma _{b}=1.7}$

Alternative forms of the Bresler-Pister yield criterion

In terms of the equivalent stress (${\displaystyle \sigma _{e}}$) and the mean stress (${\displaystyle \sigma _{m}}$), the Bresler–Pister yield criterion can be written as

${\displaystyle \sigma _{e}=a+b~\sigma _{m}+c~\sigma _{m}^{2}~;~~\sigma _{e}={\sqrt {3J_{2}}}~,~~\sigma _{m}=I_{1}/3~.}$

The Etse-Willam^[4] form of the Bresler–Pister yield criterion for concrete can be expressed as

${\displaystyle {\sqrt {J_{2}}}={\cfrac {1}{\sqrt {3}}}~I_{1}-{\cfrac {1}{2{\sqrt {3}}}}~\left({\cfrac {\sigma _{t}}{\sigma _{c}^{2}-\sigma _{t}^{2}}}\right)~I_{1}^{2}}$

where ${\displaystyle \sigma _{c}}$ is the yield stress in uniaxial compression and ${\displaystyle \sigma _{t}}$ is the yield stress in uniaxial tension.

The GAZT yield criterion^[5] for plastic collapse of foams also has a form similar to the Bresler–Pister yield criterion and can be expressed as

${\displaystyle {\sqrt {J_{2}}}={\begin{cases}{\cfrac {1}{\sqrt {3}}}~\sigma _{t}-0.03{\sqrt {3}}{\cfrac {\rho }{\rho _{m}~\sigma _{t}}}~I_{1}^{2}\\-{\cfrac {1}{\sqrt {3}}}~\sigma _{c}+0.03{\sqrt {3}}{\cfrac {\rho }{\rho _{m}~\sigma _{c}}}~I_{1}^{2}\end{cases}}}$

where ${\displaystyle \rho }$ is the density of the foam and ${\displaystyle \rho _{m}}$ is the density of the matrix material.

References

See also

• Yield surface
• Yield (engineering)
• Plasticity (physics)