USS Mississinewa
Class overview
Name	Cimarron class
Operators	United States Navy
Preceded by	Kaweah class
Succeeded by	Chicopee class
Subclasses	Ashtabula class Mispillon class
Built	1938–1945
In commission	1939–1992
Completed	35, later 4 converted to escort carriers
Lost	2
Retired	29
General characteristics
Type	Oil tanker
Displacement	7,470 long tons (7,590 t) light 24,830 long tons (25,228 t) full load
Length	553 ft (169 m)
Beam	75 ft (23 m)
Draft	32 ft 4 in (9.86 m)
Propulsion	Geared turbines, twin screws, 13,500 shp (10,067 kW)
Speed	18 knots (21 mph; 33 km/h)
Range	12,100 nmi (22,400 km; 13,900 mi)
Capacity	146,000 barrels (23,200 m3)
Complement	304
Armament	AO-22 through 33: 4 × 5"/38 caliber guns 4 × twin 40 mm gun mounts 4 × twin 20 mm gun mounts AO-51 and later: 1 × 5"/38 caliber gun 4 × 3"/50 caliber guns 4 × twin 40 mm gun mounts 4 × twin 20 mm gun mounts
General characteristics
Class and type	Ashtabula-class oiler (Jumboized Cimarron)
Displacement	12,840 tons (light); 33,987 tons (full load)
Length	644 ft (196 m)
Beam	75 ft (23 m)
Draft	34 ft 9 in (10.59 m)
Installed power	13,500 hp (10,100 kW)
Propulsion	geared turbines, four boilers, twin screws
Speed	16 knots (30 km/h)
Capacity	180,000 barrels (29,000 m3) of fuel oil
Complement	304 (as USS)
Crew	108 civilians plus U.S. Navy detachment (as USNS)
Notes	"Jumboization" involved the lengthening of the hull and installation of additional cargo capacity during 1965–66

The Cimarron-class oilers were an underway replenishment class of oil tankers which were first built in 1939 as "National Defense Tankers," United States Maritime Commission Type T3-S2-A1, designed "to conform to the approved characteristics for naval auxiliaries in speed, radius and structural strength", anticipating their militarization in the event of war. "Tentative plans had been reached with the Standard Oil Company of New Jersey to build ten high-speed tankers with the government paying the cost of the larger engines needed for increased speed. By the first week in December [1937], Standard Oil had solicited and received bids from a number of yards providing for the construction of a number of 16,300-ton (deadweight) capacity tankers. Bids were requested for two versions: a single-screw design of 13 knots and a twin-screw design of 18 knots. The price difference between the two would be used to establish the government's cost subsidy for greater speed. Plans and specifications for both designs were prepared for Standard Oil by naval architect E. L. Stewart. It seems certain that the design for the 18-knot tanker (Standard Oil Co. of New Jersey Design No. 652 NDF) evolved out of the bureau's (C&R) design for a fleet oiler."^[1]

Three of the original twelve ships were commissioned directly into the Navy at launch in 1939; the remainder entered merchant service with Standard Oil of New Jersey and Keystone Tankships before being acquired under the Two-Ocean Navy Act of July 1940. A further eighteen were built for the Navy between 1943 and 1946, with five additional units, sometimes called the Mispillion class, built to the slightly larger Type T3-S2-A3 design.

Four of the Cimarrons were converted to escort carriers in 1942; two others were sunk by enemy action.

Ships

Importance

The US Navy's mastery of underway replenishment and its ability to refuel the fleet at sea without returning to port was a major factor in its successful operations against the Japanese during the Second World War. As the largest and fastest of the Navy's oilers, the Cimarrons were the principal class employed in direct support of the task forces. Many of the Cimarron class continued to sustain this function through the Korean and Vietnam wars as well, with the "jumbos" serving right up to the Persian Gulf War.

US Navy captains who had flight status ("wings") were eligible to command aircraft carriers, but it was a prerequisite that the officer in question first have a "deep-draft" command; accordingly the Navy assigned these officers to oilers which had a similar draft.

References