Definition of a ruled surface: every point lies on a line

In geometry, a surface S is ruled (also called a scroll) if through every point of S there is a straight line that lies on S. Examples include the plane, the lateral surface of a cylinder or cone, a conical surface with elliptical directrix, the right conoid, the helicoid, and the tangent developable of a smooth curve in space.

A ruled surface can be described as the set of points swept by a moving straight line. For example, a cone is formed by keeping one point of a line fixed whilst moving another point along a circle. A surface is doubly ruled if through every one of its points there are two distinct lines that lie on the surface. The hyperbolic paraboloid and the hyperboloid of one sheet are doubly ruled surfaces. The plane is the only surface which contains at least three distinct lines through each of its points (Fuchs & Tabachnikov 2007).

The properties of being ruled or doubly ruled are preserved by projective maps, and therefore are concepts of projective geometry. In algebraic geometry, ruled surfaces are sometimes considered to be surfaces in affine or projective space over a field, but they are also sometimes considered as abstract algebraic surfaces without an embedding into affine or projective space, in which case "straight line" is understood to mean an affine or projective line.

Definition and parametric representation

Ruled surface generated by two Bézier curves as directrices (red, green)

A two dimensional differentiable manifold is called a ruled surface if it is the union of one parametric family of lines. The lines of this family are the generators of the ruled surface.

A ruled surface can be described by a parametric representation of the form

  • (CR) .

Any curve with fixed parameter is a generator (line) and the curve is the directrix of the representation. The vectors describe the directions of the generators.

The directrix may collapse to a point (in case of a cone, see example below).

Alternatively the ruled surface (CR) can be described by

  • (CD)

with the second directrix .

Alternatively, one can start with two non intersecting curves as directrices, and get by (CD) a ruled surface with line directions

For the generation of a ruled surface by two directrices (or one directrix and the vectors of line directions) not only the geometric shape of these curves are essential but also the special parametric representations of them influence the shape of the ruled surface (see examples a), d)).

For theoretical investigations representation (CR) is more advantageous, because the parameter appears only once.

Examples

cylinder, cone

Right circular cylinder

:

with

Right circular cone

:

with
In this case one could have used the apex as the directrix, i.e.: and as the line directions.

For any cone one can choose the apex as the directrix. This case shows: The directrix of a ruled surface may degenerate to a point.

helicoid

Helicoid

The directrix is the z-axis, the line directions are and the second directrix is a helix.

The helicoid is a special case of the ruled generalized helicoids.

Cylinder, cone and hyperboloids

hyperboloid of one sheet for

The parametric representation

has two horizontal circles as directrices. The additional parameter allows to vary the parametric representations of the circles. For

one gets the cylinder , for
one gets the cone and for
one gets a hyperboloid of one sheet with equation and the semi axes .

A hyperboloid of one sheet is a doubly ruled surface.

Hyperbolic paraboloid

Hyperbolic paraboloid

If the two directrices in (CD) are the lines

one gets

,

which is the hyperbolic paraboloid that interpolates the 4 points bilinearly.[1]

Obviously the ruled surface is a doubly ruled surface, because any point lies on two lines of the surface.

For the example shown in the diagram:

.

The hyperbolic paraboloid has the equation .

Möbius strip

Möbius strip

The ruled surface

with

(circle as directrix),

contains a Möbius strip.

The diagram shows the Möbius strip for .

A simple calculation shows (see next section). Hence the given realization of a Möbius strip is not developable. But there exist developable Möbius strips.[2]

Further examples

Tangent planes, developable surfaces

For the considerations below any necessary derivative is assumed to exist.

For the determination of the normal vector at a point one needs the partial derivatives of the representation  :

,

Hence the normal vector is

Because of (A mixed product with two equal vectors is always 0 !), vector is a tangent vector at any point . The tangent planes along this line are all the same, if is a multiple of . This is possible only, if the three vectors lie in a plane, i.e. they are linearly dependent. The linear dependency of three vectors can be checked using the determinant of these vectors:

  • The tangent planes along the line are equal, if

The importance of this determinant condition shows the following statement:

  • A ruled surface is developable into a plane, if for every point the Gauss curvature vanishes. This is exactly the case if
at every point is true.[3]

The generators of any ruled surface coalesce with one family of its asymptotic lines. For developable surfaces they also form one family of its lines of curvature. It can be shown that any developable surface is a cone, a cylinder or a surface formed by all tangents of a space curve.[4]

Application and history of developable surfaces

Developable connection of two ellipses and its development

The determinant condition for developable surfaces is used to determine numerically developable connections between space curves (directrices). The diagram shows a developable connection between two ellipses contained in different planes (one horizontal, the other vertical) and its development.[5]

An impression of the usage of developable surfaces in Computer Aided Design (CAD) is given in Interactive design of developable surfaces[6]

A historical survey on developable surfaces can be found in Developable Surfaces: Their History and Application[7]

Ruled surfaces in algebraic geometry

In algebraic geometry, ruled surfaces were originally defined as projective surfaces in projective space containing a straight line through any given point. This immediately implies that there is a projective line on the surface through any given point, and this condition is now often used as the definition of a ruled surface: ruled surfaces are defined to be abstract projective surfaces satisfying this condition that there is a projective line through any point. This is equivalent to saying that they are birational to the product of a curve and a projective line. Sometimes a ruled surface is defined to be one satisfying the stronger condition that it has a fibration over a curve with fibers that are projective lines. This excludes the projective plane, which has a projective line though every point but cannot be written as such a fibration.

Ruled surfaces appear in the Enriques classification of projective complex surfaces, because every algebraic surface of Kodaira dimension is a ruled surface (or a projective plane, if one uses the restrictive definition of ruled surface). Every minimal projective ruled surface other than the projective plane is the projective bundle of a 2-dimensional vector bundle over some curve. The ruled surfaces with base curve of genus 0 are the Hirzebruch surfaces.

Ruled surfaces in architecture

Doubly ruled surfaces are the inspiration for curved hyperboloid structures that can be built with a latticework of straight elements, namely:

The RM-81 Agena rocket engine employed straight cooling channels that were laid out in a ruled surface to form the throat of the nozzle section.

References

  1. G. Farin: Curves and Surfaces for Computer Aided Geometric Design, Academic Press, 1990, ISBN 0-12-249051-7, p. 250
  2. W. Wunderlich: Über ein abwickelbares Möbiusband, Monatshefte für Mathematik 66, 1962, S. 276-289.
  3. W. Kühnel: Differentialgeometrie, p. 58–60
  4. G. Farin: p. 380
  5. E. Hartmann: Geometry and Algorithms for CAD, lecture note, TU Darmstadt, p. 113
  6. Tang, Bo, Wallner, Pottmann: Interactive design of developable surfaces, ACM Trans. Graph. (MONTH 2015), DOI: 10.1145/2832906
  7. Snezana Lawrence: Developable Surfaces: Their History and Application, in  Nexus Network Journal 13(3) · October 2011, doi:10.1007/s00004-011-0087-z
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.