Dysprosium(III) chloride
Dysprosium(III) chloride hexahydrate
Names
IUPAC names
Dysprosium(III) chloride
Dysprosium trichloride
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.030.024
UNII
  • InChI=1S/3ClH.Dy/h3*1H;/q;;;+3/p-3 checkY
    Key: BOXVSFHSLKQLNZ-UHFFFAOYSA-K checkY
  • InChI=1/3ClH.Dy/h3*1H;/q;;;+3/p-3
    Key: BOXVSFHSLKQLNZ-DFZHHIFOAK
  • Cl[Dy](Cl)Cl
Properties
DyCl3
Molar mass 268.86 g/mol (anhydrous)
Appearance white solid
Density 3.67 g/cm3, solid
Melting point 647 °C (1,197 °F; 920 K) (anhydrous)
Boiling point 1,530 °C (2,790 °F; 1,800 K)
Soluble
Structure
AlCl3 structure
Octahedral
Hazards
GHS labelling:[1]
GHS07: Exclamation mark
Warning
H315, H319, H335
P302+P352, P305+P351+P338
Flash point Non-flammable
Related compounds
Other anions
 Dysprosium(III) fluoride
Dysprosium(III) bromide
Dysprosium(III) iodide
Dysprosium(III) oxide
Other cations
 Terbium(III) chloride
Dysprosium(II) chloride
Holmium(III) chloride
Related compounds
 Dysprosium(II) chloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)
Infobox references

Dysprosium(III) chloride (DyCl3), also known as dysprosium trichloride, is a compound of dysprosium and chlorine. It is a white to yellow solid which rapidly absorbs water on exposure to moist air to form a hexahydrate, DyCl3·6H2O. Simple rapid heating of the hydrate causes partial hydrolysis[2] to an oxychloride, DyOCl.

Preparation and reactions

DyCl3 is often prepared by the "ammonium chloride route", starting from either Dy2O3 or the hydrated chloride DyCl3·6H2O.[3][4][5] These methods produce (NH4)2[DyCl5]:

10 NH4Cl + Dy2O3 → 2 (NH4)2[DyCl5] + 6 NH3 + 3 H2O
DyCl3·6H2O + 2 NH4Cl → (NH4)2[DyCl5] + 6 H2O

The pentachloride decomposes thermally according to the following equation:

(NH4)2[DyCl5] → 2 NH4Cl + DyCl3

The thermolysis reaction proceeds via the intermediacy of (NH4)[Dy2Cl7].

Treating Dy2O3 with aqueous HCl produces the hydrated chloride DyCl3·6H2O, which cannot be rendered anhydrous by heating. Instead one obtains an oxychloride:[4]

DyCl3 + H2O → DyOCl + 2 HCl

Dysprosium(III) chloride is a moderately strong Lewis acid, which ranks as "hard" according to the HSAB concept. Aqueous solutions of dysprosium chloride can be used to prepare other dysprosium(III) compounds, for example dysprosium(III) fluoride:

DyCl3 + 3 NaF → DyF3 + 3 NaCl

Uses

Dysprosium(III) chloride can be used as a starting point for the preparation of other dysprosium salts. Dysprosium metal is produced when a molten mixture of DyCl3 in eutectic LiCl-KCl is electrolysed. The reduction occurs via Dy2+, at a tungsten cathode.[6]

Precautions

Dysprosium compounds are believed to be of low to moderate toxicity, although their toxicity has not been investigated in detail.

References

  1. ↑ GHS: Sigma-Aldrich 325546
  2. ↑ F. T. Edelmann, P. Poremba, in: Synthetic Methods of Organometallic and Inorganic Chemistry, (W. A. Herrmann, ed.), Vol. 6, Georg Thieme Verlag, Stuttgart, 1997.
  3. ↑ Meyer, G. (1989). "The Ammonium Chloride Route to Anhydrous Rare Earth Chlorides—The Example of Ycl 3". The Ammonium Chloride Route to Anhydrous Rare Earth Chlorides-The Example of YCl3. Inorganic Syntheses. Vol. 25. pp. 146–150. doi:10.1002/9780470132562.ch35. ISBN 978-0-470-13256-2.
  4. 1 2 Taylor, M.D.; Carter, C.P. (1962). "Preparation of anhydrous lanthanide halides, especially iodides". Journal of Inorganic and Nuclear Chemistry. 24 (4): 387–391. doi:10.1016/0022-1902(62)80034-7.
  5. ↑ Edelmann, F. T.; Poremba, P. (1997). Herrmann, W. A. (ed.). Synthetic Methods of Organometallic and Inorganic Chemistry. Vol. VI. Stuttgart: Georg Thieme Verlag. ISBN 3-13-103021-6.
  6. ↑ Y. Castrillejo, M. R. Bermejo, A. I. Barrado, R. Pardo, E. Barrado, A. M. Martinez, Electrochimica Acta, 50, 2047-2057 (2005).
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.