A hobnail
A pair of hobnailed boots

In footwear, a hobnail is a short nail with a thick head used to increase the durability of boot soles or provide traction

History

Roman hobnails were shoe tacks, a type of clinching nail; the narrowing tip was turned by a last held inside the sole as the nail was driven. So the tip did a U-turn back into the sole, clinching the nail in place.
Reconstruction Ancient Roman caliga

Hobnailed boots (in Scotland "tackety boots") are boots with hobnails (nails inserted into the soles of the boots), usually installed in a regular pattern, over the sole. They usually have an iron horseshoe-shaped insert, called a heel iron, to strengthen the heel, and an iron toe-piece. They may also have steel toecaps. The hobnails project below the sole and provide traction on soft or rocky terrain and snow, but they tend to slide on smooth, hard surfaces.

They have been used since antiquity for inexpensive durable footwear, often by workmen and the military. Examples include the caligae of the Roman military, the "ammo boot" in use by the British and Commonwealth armies from the 1860s and the US Army "trench boots" of World War I.

Important design work for the modern hobnailed boot was done during World War I, e.g. the "Pershing boot" in the United States.[1] Problems experienced in designing WWI US Army boots were:

  • Tearing at the backstay: solved by securing the backstay with three rows of stitching each side.
  • Letting water in: solved by dubbin.
  • Rotting in foul conditions in trenches: solved by chrome tanning rather than using vegetable tanning.
  • Cold conducting through hobnails into the feet: that, and need for strength, solved by three thicknesses of leather in the soles.
  • Sole wear: toe and heel irons in addition to hobnails.

Uses

Hobnailed boots were formerly common in mountaineering to grip on sloping rock surfaces. These boots tended to have large pointed hobnails on the extreme edges of the soles and heels to grip small roughness on steeply sloping rock and on snow, but have become less common with the invention of crampons.

Homemade hobnailed boots, which provide traction on ice and snow, can be created by driving roofing nails (with cut-off ends) through used rubber boots, which are then worn with normal shoes on the inside. [2]

See also

  • Caulk boots – spike-soled boots worn by loggers and tree planters

References

  1. "Little Tanks – The American Field Shoe [Boot]". Worldwar1.com. 1918-11-11. Retrieved 2009-09-06.
  2. Lubinski, John (2019). Encyclopedia of Made it Myself Ideas. Vol. 4. Lakeville, Minnesota: Farm Show. p. 53.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.