Thermodynamics
The classical Carnot heat engine
Branches Classical Statistical Chemical Quantum thermodynamics Equilibrium / Non-equilibrium
Laws Zeroth First Second Third
Systems Closed system Open system Isolated system State Equation of state Ideal gas Real gas State of matter Phase (matter) Equilibrium Control volume Instruments Processes Isobaric Isochoric Isothermal Adiabatic Isentropic Isenthalpic Quasistatic Polytropic Free expansion Reversibility Irreversibility Endoreversibility Cycles Heat engines Heat pumps Thermal efficiency
System properties Note: Conjugate variables in italics Property diagrams Intensive and extensive properties Process functions Work Heat Functions of state Temperature / Entropy (introduction) Pressure / Volume Chemical potential / Particle number Vapor quality Reduced properties
Material properties Property databases Specific heat capacity  ${\displaystyle c=}$ ${\displaystyle T}$ ${\displaystyle \partial S}$ ${\displaystyle N}$ ${\displaystyle \partial T}$ Compressibility  ${\displaystyle \beta =-}$ ${\displaystyle 1}$ ${\displaystyle \partial V}$ ${\displaystyle V}$ ${\displaystyle \partial p}$ Thermal expansion  ${\displaystyle \alpha =}$ ${\displaystyle 1}$ ${\displaystyle \partial V}$ ${\displaystyle V}$ ${\displaystyle \partial T}$
Equations Carnot's theorem Clausius theorem Fundamental relation Ideal gas law Maxwell relations Onsager reciprocal relations Bridgman's equations Table of thermodynamic equations
Potentials Free energy Free entropy Internal energy ${\displaystyle U(S,V)}$ Enthalpy ${\displaystyle H(S,p)=U+pV}$ Helmholtz free energy ${\displaystyle A(T,V)=U-TS}$ Gibbs free energy ${\displaystyle G(T,p)=H-TS}$
History Culture History General Entropy Gas laws "Perpetual motion" machines Philosophy Entropy and time Entropy and life Brownian ratchet Maxwell's demon Heat death paradox Loschmidt's paradox Synergetics Theories Caloric theory Vis viva ("living force") Mechanical equivalent of heat Motive power Key publications An Experimental Enquiry Concerning ... Heat On the Equilibrium of Heterogeneous Substances Reflections on the Motive Power of Fire Timelines Thermodynamics Heat engines Art Education Maxwell's thermodynamic surface Entropy as energy dispersal
Scientists Bernoulli Boltzmann Bridgman Carathéodory Carnot Clapeyron Clausius de Donder Duhem Gibbs von Helmholtz Joule Kelvin Lewis Massieu Maxwell von Mayer Nernst Onsager Planck Rankine Smeaton Stahl Tait Thompson van der Waals Waterston
Other Nucleation Self-assembly Self-organization Order and disorder
Category

According to van der Waals, the theorem of corresponding states (or principle/law of corresponding states) indicates that all fluids, when compared at the same reduced temperature and reduced pressure, have approximately the same compressibility factor and all deviate from ideal gas behavior to about the same degree.^[1][2]

Material constants that vary for each type of material are eliminated, in a recast reduced form of a constitutive equation. The reduced variables are defined in terms of critical variables.

The principle originated with the work of Johannes Diderik van der Waals in about 1873^[3] when he used the critical temperature and critical pressure to derive a universal property of all fluids that follow the van der Waals equation of state. It predicts a value of ${\displaystyle 3/8=0.375}$ that is found to be an overestimate when compared to real gases.

Edward A. Guggenheim used the phrase "Principle of Corresponding States" in an opt-cited paper to describe the phenomenon where different systems have very similar behaviors when near a critical point.^[4]

There are many examples of non-ideal gas models which satisfy this theorem, such as the van der Waals model, the Dieterici model, and so on, that can be found on the page on real gases.

Compressibility factor at the critical point

The compressibility factor at the critical point, which is defined as ${\displaystyle Z_{c}={\frac {P_{c}v_{c}\mu }{RT_{c}}}}$, where the subscript ${\displaystyle c}$ indicates physical quantities measured at the critical point, is predicted to be a constant independent of substance by many equations of state.

The table below for a selection of gases uses the following conventions:

• ${\displaystyle T_{c}}$: critical temperature [K]
• ${\displaystyle P_{c}}$: critical pressure [Pa]
• ${\displaystyle v_{c}}$: critical specific volume [m³⋅kg⁻¹]
• ${\displaystyle R}$: gas constant (8.314 J⋅K⁻¹⋅mol⁻¹)
• ${\displaystyle \mu }$: Molar mass [kg⋅mol⁻¹]

Substance	${\displaystyle P_{c}}$ [Pa]	${\displaystyle T_{c}}$ [K]	${\displaystyle v_{c}}$ [m3/kg]	${\displaystyle Z_{c}}$
H2O	21.817×106	647.3	3.154×10−3	0.23[5]
4He	0.226×106	5.2	14.43×10−3	0.31[5]
He	0.226×106	5.2	14.43×10−3	0.30[6]
H2	1.279×106	33.2	32.3×10−3	0.30[6]
Ne	2.73×106	44.5	2.066×10−3	0.29[6]
N2	3.354×106	126.2	3.2154×10−3	0.29[6]
Ar	4.861×106	150.7	1.883×10−3	0.29[6]
Xe	5.87×106	289.7	0.9049×10−3	0.29
O2	5.014×106	154.8	2.33×10−3	0.291
CO2	7.290×106	304.2	2.17×10−3	0.275
SO2	7.88×106	430.0	1.900×10−3	0.275
CH4	4.58×106	190.7	6.17×10−3	0.285
C3H8	4.21×106	370.0	4.425×10−3	0.267

See also

• Van der Waals equation
• Equation of state
• Compressibility factors
• Johannes Diderik van der Waals equation
• Noro-Frenkel law of corresponding states

References

External links

• Properties of Natural Gases. Includes a chart of compressibility factors versus reduced pressure and reduced temperature (on last page of the PDF document)
• Theorem of corresponding states on SklogWiki.