The following is a list of Historic Mechanical Engineering Landmarks as designated by the American Society of Mechanical Engineers (ASME) since it began the program in 1971. The designation is granted to existing artifacts or systems representing significant mechanical engineering technology. Mechanical Engineering Heritage Sites are particular locales at which some event or development occurred or which some machine, building, or complex of significance occupied. Also Mechanical Engineering Heritage Collections refers to a museum or collection that includes related objects of special significance to, but not necessarily a major evolutionary step in, the historical development of mechanical engineering.[1]

Clicking the landmark number in the first column will take you to the ASME page on the site where you will also find the downloadable brochure from the dedication.

There are over 275 landmarks on the list.[2]

Ref# Year added Name Image Date Location Region/state Country Notes
1 1973 Ferries & Cliffhouse Cable Railway Power House

One of the most complicated cable-car systems to run from a single station.

1887 San Francisco California United States ASME brochure
2 1973 Leavitt-Riedler Pumping Engine

Unusual triple-expansion, three-crank "rocker" engine, driving high-capacity, high-speed pumps.

1894 Boston Massachusetts United States ASME brochure
3 1974 A.B. Wood Screw Pump

The most advanced low-lift drainage pump in use in the early 20th century, later used worldwide.

1914 New Orleans Louisiana United States ASME brochure
4 1975 Portsmouth-Kittery Naval Shipbuilding Activity

First US naval shipyard, achieving notable firsts in technology and producing many well-known US naval vessels.

1774 Kittery Maine United States ASME brochure
5 1975 Boyden Hydraulic Turbines

Two of the oldest surviving water turbines, probably the largest and nearly the most powerful ever built in the United States for mechanical drive. Located at Harmony Mills.

1871 Cohoes New York United States ASME brochure
6 1975 Curtis 5000-kW Vertical Turbine

The most powerful steam turbine-generator in the world at the time of its construction.

1903 Schenectady New York United States ASME brochure
7 1975 Saugus Ironworks

Reconstruction of the first successful commercial ironworks in North America.

1647 Saugus Massachusetts United States ASME brochure
8 1975 Pioneer Oil Refinery California Star Oil Works

A replica of the first successful commercial oil refinery in the US West.

1876 Newhall California United States ASME brochure
9 1975 Chesapeake & Delaware Canal Scoop Wheel & Engines

19th-century steam pumps at the (former) summit of the ship canal.

1852 Chesapeake City Maryland United States ASME brochure
10 1975 USS Texas' Reciprocating Steam Engines

Last reciprocating marine engines installed in a naval ship.

1914 La Porte Texas United States ASME brochure
11 1975 Paige Compositor

First US typography machine to set, justify, and distribute foundry type from a common case using one operator.

1877 Hartford Connecticut United States No ASME brochure available.
12 1976 Reynolds-Corliss Pumping Engine

Early 20th-century water pump driven by a Corliss steam engine.

1917 Jacksonville Florida United States ASME brochure
13 1976 Childs-Irving Hydroelectric Project

Early 20th-century hydroelectric plant incorporating innovative technologies.

Interior of Childs power plant (MS-2-1.4-1.018) 1909 Phoenix Arizona United States ASME brochure
14 1976 Hanford B Reactor

First US plutonium production reactor placed in commercial operation.

1944 Richland Washington United States ASME brochure
15 1976 Magma Copper Mine Air Conditioning System

First air-conditioned mine in North America.

1937 Superior Arizona United States ASME brochure
16 1976 Manitou and Pike's Peak Railway

Highest railway in the US and highest rack railway in the world.

1891 Pikes Peak Colorado United States ASME brochure
17 1976 Edgar Station, Edison Electric Illuminating Co.

Power-generation station with one of the world's only high-pressure topping turbines, which set new records in the late 1920s.

1925 Weymouth Massachusetts United States ASME brochure
18 1976 Mount Washington Cog Railway

World's first cog railway.

1869 Mount Washington New Hampshire United States ASME brochure
19 1976 Folsom Power House #1

One of the first successful uses of hydroelectric power in the world, including the first successful long-distance transmission of power.

1895 Folsom California United States ASME brochure
20 1977 Crawler Transporters of Launch Complex 39

Two of the largest ground vehicles ever built, including automatic load-leveling systems.

1965 Cape Canaveral Florida United States ASME brochure
21 1977 Fairmount Water Works

First large-scale application of steam pumping, later water power, to public water supply.

1815 Philadelphia Pennsylvania United States ASME brochure
22 1977 USS Olympia, Vertical Reciprocating Steam Engines

Two of the first vertical triple-expansion marine engines.

1892 Philadelphia Pennsylvania United States ASME brochure
23 1977 Pit-Cast Jib Crane

Last US pit-cast jib crane to operate in the casting of iron pipe.

1905 Birmingham Alabama United States ASME brochure
24 1977 State Line Generating Unit 1

World's largest electric-power generator for nearly 25 years, achieving many design firsts.

1929 Hammond Indiana United States ASME brochure
25 1977 Pratt Institute Power Plant

The oldest steam-generating plant of its kind in the Northeastern United States.

1887 Brooklyn New York United States ASME brochure
26 1977 Monongahela Incline

First US passenger incline.

1870 Pittsburgh Pennsylvania United States ASME brochure
27 1977 Duquesne Incline

Second US passenger incline.

1877 Pittsburgh Pennsylvania United States ASME brochure
28 1977 Great Falls Raceway and Power System

First major US water power system and basis for integrating urban planning with industrial development.

1792 Paterson New Jersey United States ASME brochure
29 1977 Vulcan Street Power Plant

First Edison hydroelectric central station. Coperating landmark by ASME IEEE and ASCE.

1882 Appleton Wisconsin United States ASME brochure
30 1977 Wilkinson Mill

Early 19th-century textile mill and machine shop.

1810 Pawtucket Rhode Island United States ASME brochure
31 1978 Interborough Rapid Transit System (Original Line)

The first fully electrically signaled railroad in the United States and the first practical subway in New York City.

1904 New York New York United States No ASME brochure available.
32 1978 Baltimore & Ohio Railroad Old Main Line

First US railroad in public service.

1828 Maryland Maryland United States ASME brochure
33 1978 Ringwood Manor Iron Complex

Surviving 18th-century iron manufacturing center.

1740 Ringwood New Jersey United States ASME brochure
34 1978 Joshua Hendy Iron Works

Early 20th-century ironworks demonstrating the adaptability required for industrial survival.

1906 Sunnyvale California United States ASME brochure
35 1979 Hacienda Azucarera la Esperanza Sugar Mill Steam Engine

Typical beam steam engine of the mid-19th century, directly connected to sugar crushing rolls.

1861 Manatí Puerto Rico United States ASME brochure
36 1979 RL-10 Rocket Engine

First rocket engine to use high-energy liquid hydrogen as fuel.

1958 West Palm Beach Florida United States ASME brochure
37 1979 A. O. Smith Automatic Frame Plant

Prototype of the automated factory; dubbed the 'Mechanical Marvel.'

1920 Milwaukee Wisconsin United States No longer exists.

ASME brochure

38 1979 Morris Canal (Reaction) Turbine

Early reaction, or Scotch, turbine, a type that later found widespread application.

1850 Port Warren New Jersey United States Scotch Turbine displayed at Hopatcong State Park.

ASME brochure

39 1979 Experimental Breeder Reactor I

World's first nuclear power plant to demonstrate the breeder concept.

1951 Arco Idaho United States ASME brochure
40 1979 Drake Oil Well

First practical oil recovery system using salt-well drilling techniques and modern pipe-driving methods, marks beginning of US petroleum industry.

1859 Titusville Pennsylvania United States ASME brochure
41 1980 Springfield Armory

First US armory noted for machinery for mass production of small arms, including the Blanchard lathe.

1794 Springfield Massachusetts United States ASME brochure
42 1980 East Wells (Onieda) Street Power Plant

Pilot plant for US development of pulverized-coal firing in power-plant boilers.

1918 Milwaukee Wisconsin United States ASME brochure
43 1980 Watkins Woolen Mill

The best preserved 19th-century woolen mill in North America.

1868 Lawson Missouri United States ASME brochure
44 1980 Fusion-welded Test Boiler Drum

First fusion-welded boiler drum, tests on which led to widespread acceptance in industry.

1930 Windsor Connecticut United States ASME brochure
45 1980 Georgetown Steam Plant

Steam plant with early Curtis turbines, marking the beginning of the end of the reciprocating steam engine as the central station prime mover.

1906 Seattle Washington United States ASME brochure
46 1980 Commonwealth Building Heat Pump

First large commercial building in the United States to pioneer the use of heat pumps for heating and cooling.

1948 Portland Oregon United States ASME brochure
47 1980 Shippingport Nuclear Power Station

First US commercial central electric-generating station to use nuclear energy.

1958 Shippingport Pennsylvania United States ASME brochure
48 1980 Edison 'Jumbo' Engine-driver Dynamo

One of six dynamos from Edison's Pearl Street Station, the prototype for US central-station power generation.

1882 Dearborn Michigan United States ASME brochure
49 1980 Marine-type Triple-expansion, Engine-driven Dynamo

Sole surviving engine-generator set marking the beginning of large-scale electric power generation in the United States.

1891 Dearborn Michigan United States No ASME brochure available.
50 1980 Cooperative Fuel Research Engine

Pioneer variable-compression laboratory engine for testing fuels.

1928 Waukesha Wisconsin United States ASME brochure
51 1980 Port Washington Power Plant

The world's most thermally efficient steam plant for many years.

1935 Port Washington Wisconsin United States ASME brochure
52 1980 Saturn V Rocket (Lyndon B. Johnson Space Center)

Three sites (Texas, Florida and Alabama) were simultaneously designated (via satellite) in July 1980.

1967 Houston Texas United States ASME brochure
53 1980 Saturn V Rocket (Kennedy Space Center Visitor Complex)

Three sites (Texas, Florida and Alabama) were simultaneously designated (via satellite) in July 1980.

1967 Cape Canaveral Florida United States ASME brochure
54 1980 Saturn V Dynamic Test Vehicle (U.S. Space & Rocket Center)

Three sites (Texas, Florida and Alabama) were simultaneously designated (via satellite) in July 1980.

1966[3][4] Huntsville Alabama United States ASME brochure
55 1980 Blood Heat Exchanger

The first commercial human-blood heat exchanger for controlling hyperthermic temperatures during open-heart surgery.

1957 Amherst New York United States ASME brochure
56 1980 Rocky River Pumped-storage Hydroelectric Plant

Early example of the pumped-storage principle, at a power plant.

1929 New Milford Connecticut United States ASME brochure
57 1980 Kaplan Turbine at York Haven Dam

One of the first three Kaplan-type hydraulic turbines in the United States.

1929 York County Pennsylvania United States ASME brochure
58 1980 Pioneer Zephyr

First US diesel-powered, stainless-steel streamlined train.

1934 Chicago Illinois United States ASME brochure
59 1981 Chestnut Street Pumping Engine

Typical US municipal steam water-pumping engine of the late 19th century and early 20th century.

1913 Erie Pennsylvania United States No ASME brochure available
60 1981 Holt Caterpillar Tractor

Earliest track-type gasoline-powered tractor, influencing designs worldwide.

1918 Stockton California United States No ASME brochure available
61 1981 Michigan-Lake Superior Power Hydroelectric Plant

An early, extremely large-scale, low-head hydropower plant using many small turbines.

1902 Sault Ste. Marie Michigan United States ASME brochure
62 1981 Southern Pacific #4294 Cab-in-Front Steam Locomotive

Example of the final phase of US steam locomotive development in size and power.

1944 Sacramento California United States ASME brochure
63 1981 Jackson Ferry Shot Tower

One of the few surviving shot towers for making spherical lead shot.

1807 Austinville Virginia United States ASME brochure
64 1981 Graue Mill

One of a few survivors of typical US mill machinery with wood as the principal material.

1852 Oak Brook Illinois United States ASME brochure
65 1981 Evinrude Outboard Motor

Early model of outboard motor for small boats, first commercially successful.

1909 Milwaukee Wisconsin United States ASME brochure
66 1981 Mount Wilson Observatory, 100-inch Hooker Telescope

Unique telescope mirror support and use of mercury flotation to reduce friction.

1918 Los Angeles County California United States ASME brochure
67 1981 Hiwassee Dam Unit 2 Reversible Pump-Turbine

The first integrated pump-turbine to be installed in a US power plant and also the largest and most powerful in the mid-20th century.

1956 Cherokee County North Carolina United States ASME brochure
68 1981 Edison Experimental Recording Phonograph

The world's first practical sound recording machine.

1877 West Orange New Jersey United States No ASME brochure available
69 1981 Creusot Steam Hammer

The most powerful steam hammer in the world for many years.

1876 Le Creusot Saône-et-Loire France ASME brochure
70 1981 Newcomen Engine

Direct descendant of Thomas Newcomen's first atmospheric steam engine.

1712 Dartmouth South Devon United Kingdom Located at the Dartmouth Museum.

ASME brochure

71 1981 ALCOA 50,000-ton Hydraulic Forging Press

One of the world's largest fabrication tools, dominant in aircraft and aerospace development.

1954 Cleveland Ohio United States ASME brochure
72 1981 Rotating-arm Model-test Facility at Stevens Institute of Technology

The world's first model-test facility to conduct maneuverability and control experiments for surface ships, submersibles, and airships.

1945 Hoboken New Jersey United States ASME brochure
73 1982 Turbinia

The world's first turbine-driven ship.

1897 Newcastle upon Tyne Tyne and Wear United Kingdom ASME brochure
74 1982 Anderson-Barngrover Rotary Pressure Sterilizer

The world's first continuous-stream automation of the cooking and cooling system for canned food.

1920 Santa Clara California United States ASME brochure
75 1982 Alden Research Laboratory Rotating Boom

Early 20th-century test facility for current meters, aircraft propellers, ships' logs, pitot tubes, and mine-sweeping paravanes.

1908 Holden Massachusetts United States ASME brochure
76 1982 AC Electrification of the New York, New Haven & Hartford Railroad

Pioneering venture in mainline railroad electrification. The Cos Cob plant operated until October 1986.

1907 Cos Cob Connecticut United States Demolished 2001 and artifacts given to Smithsonian Institution.

No ASME brochure available

77 1982 Worthington Horizontal Cross-compound Pumping

Corliss-driven pump, typical of early 20th-century US practice.

1925 Erie Pennsylvania United States ASME brochure
78 1982 Electro-Motive FT Freight-service Diesel-Electric Locomotive

Prototype of the first mass-produced diesel-electric locomotives used for US freight service. Located at National Museum of Transportation as Southern Railway Locomotive #6100.

1939 St. Louis Missouri United States ASME brochure
79 1982 Lombard Steam Log Hauler

The first practical example of crawler-tread vehicles now used in agricultural, construction, and military equipment. Located at the Lumberman's Museum.

1910 Patten Maine United States ASME brochure
80 1982 Aberdeen Range, Aberdeen Proving Ground

The world's first large-scale, fully instrumented ballistic range for producing data on aerodynamics.

1943 Aberdeen Maryland United States ASME brochure
81 1983 Corning Ribbon Machine

Earliest example of the machine that automated light-bulb manufacture.

1926 Dearborn Michigan United States Located at The Henry Ford museum.

ASME brochure

82 1983 FMC Citrus Juice Extractor

Early example of machines that automated extraction of juices from fruit.

1947 Lakeland Florida United States Plaque not on display.

ASME brochure

83 1983 Pennsylvania Railroad GG1 Electric Locomotive #4800

Locomotive prototype for use on electrified lines in eastern US, also exceptional for its flexible suspension system.

1943 Strasburg Pennsylvania United States Located at the Railroad Museum of Pennsylvania

ASME brochure

84 1983 Reed Gold Mine Ten-Stamp Mill

Typical late 19th-century western-US stamp mill.

1895 Midland North Carolina United States ASME brochure
85 1983 PACECO Container Crane

World's first high-speed, dockside container-handling crane.

1959 Alameda California United States 1987: Purchased by and now located in Port of Nanjing, China.

1988: Rededicated in conjunction with Chinese Mechanical Engineering Society.

ASME brochure
86 1983 Owens AR Bottle Machine

World's first automated bottling machine that introduced cheap and plentiful supply of glass containers.

1912 Toledo Ohio United States No longer exists.

No ASME brochure available

87 1983 NS Savannah

The world's first nuclear-powered cargo-passenger ship.

1962 Newport News Virginia United States ASME brochure
88 1983 Xerography

Early models of revolutionary dry-copying process at the Battelle Memorial Institute.

1948 Columbus Ohio United States ASME brochure
89 1983 Wyman-Gordon 50,000-ton Hydraulic Forging Press

One of the world's largest fabrication tools, influencing aviation and aerospace technology.

1955 Grafton Massachusetts United States ASME brochure
90 1984 IBM 350 RAMAC Disk File

World's first computer storage device with random access to large volumes of data.

1956 San Jose California United States 2019: Site demolished.

Artifacts now at Computer Museum; plaque not on display.

ASME brochure
91 1984 Archimedes Screw Pump

One of the US's oldest surviving examples of the wind-driven Archimedes screw-pump.

1890 Newark California United States ASME brochure
92 1984 Stanford Linear Accelerator Center

Unique electromechanical devices and systems in the longest accelerator in the world.

1962 Menlo Park California United States ASME brochure
93 1984 Holland Tunnel Ventilation System

The world's first long underwater tunnel designed for motor vehicles, with innovative ventilating system.

1920 New York New York United States ASME brochure
94 1984 Norfolk & Western #611, Class J Steam Locomotive

The last survivor of US coal-fired passenger locomotives, considered among the most advanced of any 4-8-4.

1941 Roanoke Virginia United States Located at Virginia Museum of Transportation.

ASME brochure

95 1984 Sikorsky VS-300 Helicopter

The first practical US helicopter, pioneering the single-main-rotor concept.

1939 Dearborn Michigan United States Located at The Henry Ford museum.

ASME brochure

96 1984 Quincy Mining Company No. 2 Mine Hoist

The world's largest mine hoist.

1920 Hancock Michigan United States ASME brochure
97 1984 SS Great Britain

The world's first iron-hulled, screw-propelled ship to cross any ocean, leading to Britain's world leadership in maritime commerce.

1843 Bristol South West England United Kingdom ASME brochure
98 1984 SS Jeremiah O'Brien

One of only two operating survivors of the US emergency-cargo fleet known as Liberty Ships.

1943 San Francisco California United States ASME brochure
99 1984 Idols Station, Fries Manufacturing & Power Company

Typical 19th-century small-scale, low-head run-of-the-river hydroelectric plant.

1898 Winston-Salem North Carolina United States ASME brochure
100 1984 Belle Isle Gas Turbine

The first gas turbine used for electric utility power generation in the United States.

1949 Schenectady New York United States ASME brochure
101 1984 St. Charles Avenue Streetcar Line

The oldest surviving interurban-urban passenger rail transport system in the United States.

1835 New Orleans Louisiana United States ASME brochure
102 1985 Atlas Launch Vehicle

First launch vehicle for the US space program.

1957 El Cajon California United States ASME brochure
103 1985 First Hot Isostatic Processing Vessels

Early examples of fabrication vessels using gas pressure and temperature to produce advanced alloy and ceramic products.

1956 Columbus Ohio United States Located at Battelle Memorial Institute.

ASME brochure

104 1985 Basic-Oxygen Steel Making Vessel

Vessel that introduced the basic oxygen process to the United States.

1955 Trenton Michigan United States Presently owned by Detroit Steel Company.

ASME brochure

105 1985 Detroit Edison District Heating System

Early example of typical US district heating plant.

1903 Detroit Michigan United States ASME brochure
106 1985 Cornwall Iron Furnace

Typical 19th-century US charcoal-fueled blast furnace, fully intact.

1742 Cornwall Pennsylvania United States ASME brochure
107 1985 Lowell Power Canal System and Pawtucket Gatehouse

Early major US water-power system and the first Francis inward-flow water turbine placed in service and oldest in existence.

1796 Lowell Massachusetts United States ASME brochure
108 1985 Jacobs Engine Brake Retarder

The first practical mechanism for braking large trucks with engine compression as they descend long, steep grades at controlled speeds.

1957 Bloomfield Connecticut United States ASME brochure
109 1985 Geysers Unit 1

The first commercial geothermal electricity-generating station in North America.

1960 Sonoma County California United States ASME brochure
110 1985 Harris-Corliss Steam Engine

Example of a late 19th-century 350-hp Corliss-type steam engine.

1895 Atlanta Georgia United States Located at Randall Brothers, Inc.

ASME brochure

111 1986 Boulton & Watt Rotative Steam Engine

Oldest surviving operable rotative steam engine by Boulton and Watt.

1785 Sydney New South Wales Australia Located at the Powerhouse Museum.

ASME brochure

112 1985 TV Emery Rice Steam Engine

Mid-19th-century horizontal compound marine steam engine with return connecting rod.

1873 Kings Point New York United States ASME brochure
113 1986 Fairbanks Exploration Company Gold Dredge No. 8

One of the last mammoth gold dredges in the United States accessible to the public.

1927 Fairbanks Alaska United States ASME brochure
114 1986 Pitney-Bowes Model M Postage Meter

Early model of world's first commercial postage meter.

1920 Stamford Connecticut United States ASME brochure
115 1986 Disneyland Monorail System

The first commercial Wenner-Gren monorail system.

1959 Anaheim California United States ASME brochure
116 1987 McKinley Climatic Laboratory

Test facility with unequalled capacity to simulate a wide range of climatic conditions from arctic cold to jungle moisture for full-scale equipment testing.

1944 Eglin Air Force Base Florida United States ASME brochure
117 1987 Icing Research Tunnel, NASA Lewis Research Center

The world's oldest and largest refrigerated icing wind tunnel, with unique heat exchanger and spray system.

1944 Cleveland Ohio United States ASME brochure
118 1987 Samson Mine Reversible Waterwheel & Man Engine

Hoists representative of bygone practice, including a waterwheel for ore hoisting and a mechanism to hoist workers.

1837 Sankt Andreasberg Lower Saxony Germany ASME brochure
119 1987 American Precision Museum 1966 Windsor Vermont United States No ASME brochure available
120 1987 Robbins & Lawrence Machine Shop

Site of first machine shop to achieve interchangeable manufacture on a practical scale.

1846 Windsor Vermont United States ASME brochure
121 1987 Holly Fire Protection and Water System

Site of the first US integrated system to supply water for public safety.

1863 Lockport New York United States No ASME brochure available
122 1987 Holly District Heating System

Site of the first US district heating steam-heating system.

1877 Lockport New York United States No ASME brochure available
123 1987 Kingsbury Thrust Bearing

First and still-operating Kingsbury thrust bearing in hydroelectric service, later used worldwide for all types of large machinery.

1911 Holtwood Pennsylvania United States Located at Holtwood Dam.

ASME brochure

124 1987 Chapin Mine Pump

Late 19th-century steeple compound-condensing engine and one of the largest at the time.

1893 Iron Mountain Michigan United States ASME brochure
125 1987 Pullman Sleeping Car Glengyle

Earliest known survivor of the fleet of heavyweight, all-steel sleepers built by the Pullman Company.

1911 Dallas Texas United States Located at Museum of the American Railroad.

ASME brochure

126 1987 Westmoreland Iron Works

An early and long-running malleable ironworks.

1850 Westmoreland New York United States Early 1990s: Foundry closed and plaque given to the Westmoreland Historical Society.

No ASME brochure available

127 1987 Big Brutus Mine Shovel

One of the world's largest power shovels.

1962 West Mineral Kansas United States ASME brochure
128 1987 Vallecitos Boiling Water Reactor

The world's first privately owned and operated nuclear power plant to deliver significant quantities of electricity to a public utility grid.

1957 Alameda County California United States ASME brochure
129 1987 Holyoke Water Power System

Major 19th-century US industrial center for paper and textile industries, known for its machine shops and water-power system.

1859 Holyoke Massachusetts United States See also: Holyoke Dam, Holyoke Heritage State Park.

No ASME brochure available

130 1987 Stirling Water-tube Boilers

Oldest existing steam generator in a US cotton mill.

1906 Dalton Georgia United States No ASME brochure available
131 1988 Roosa Master Diesel Fuel-Injection Pump

Early developmental models of distributor-type injection pump for controlling engine speed.

1947 Windsor Connecticut United States ASME brochure
132 1988 Chicago Burlington & Quincy Railroad Roundhouse

Innovative railroad yard machine shop for first railroad linking Chicago and the Mississippi River.

1858 Aurora Illinois United States ASME brochure
133 1988 Buckeye Steam Traction Ditcher

Earliest surviving example of the first successful traction ditching machine for laying agricultural drainage tiles.

1902 Findlay Ohio United States Located at Hancock Historical Museum.

ASME brochure

134 1988 Geared Locomotives of Heisler, Shay, Climax

Early examples of small slow-speed 19th-century geared locomotives.

1872 Felton California United States No ASME brochure available
135 1988 Neuchâtel Gas Turbine

The world's first successful electricity-generating gas turbine to go into commercial operation.

1939 Neuchâtel Neuchâtel Switzerland ASME brochure
136 1988 AAR Railroad-wheel Dynamometer

The first and only railroad dynamometer to test track wheels using vertical and lateral loads as well as thermal braking at the wheel rim.

1955 Pueblo Colorado United States ASME brochure
137 1989 Texas & Pacific #610 Lima Superpower Steam Locomotive

The sole surviving example of the earliest form of "superpower" steam locomotives.

1927 Rusk Texas United States No ASME brochure available
138 1989 ASME Boiler and Pressure Vessel Code

The first comprehensive standard for the design, construction, inspection, and testing of boilers and pressure vessels, greatly influencing public safety.

1915 Dearborn Michigan United States Early book on loan to The Henry Ford museum.

No ASME brochure available

139 1989 Roebling 80-ton Wire Rope Machine

The only remaining Roebling machine, largest wire-rope closing machine in 1893.

1893 Trenton New Jersey United States ASME brochure
140 1989 Propulsion Wind Tunnel Facility Wind Tunnel

The world's first large-scale testing facility for jet and rocket engines in simulated high-speed flight conditions.

1955 Arnold Air Force Base Tennessee United States No ASME brochure available
141 1989 Browning Firearms Collection

Collection of sporting and military firearms designed by John Moses Browning.

1878 Ogden Utah United States Located at Ogden Union Station Museum.

ASME brochure

142 1990 Pierce-Donachy Ventricular Assist Device

The world's first implantable heart pump to receive widespread clinical use.

1973 Hershey Pennsylvania United States ASME brochure
143 1990 USS Cairo Engine and Boilers

The sole survivor of the fleet of river gunboats built by the Union during the US Civil War.

1862 Vicksburg Mississippi United States ASME brochure
144 1990 Curtis 500-kW Vertical Turbine

The first steam turbine electric-generation station.

1903 Indianapolis Indiana United States ASME brochure
145 1990 Southern Gas Association-PCRC Analog Facility

The first computer system to be applied to the design of natural-gas pipeline systems.

1955 San Antonio Texas United States ASME brochure
146 1990 National Soil Dynamics Laboratory

The world's first full-size laboratory for tillage tools and traction equipment in all types of soils.

1935 Auburn Alabama United States ASME brochure
147 1990 Baltimore & Ohio #4500, Freight, USRA 2-8-2A

The first USRA freight locomotive built, representing the first standardized family of US locomotives.

1918 Baltimore Maryland United States ASME brochure
148 1990 Atlantic Coast Line #1504, USRA 4-6-2A

An early example of USRA passenger locomotives representing the first US standardization program.

1919 Jacksonville Florida United States Located at the Prime Osborn Convention Center.

ASME brochure

149 1990 Hydromatic Propeller

Early example of propeller innovations, including variable-pitch control and feathering capability.

1938 Windsor Locks Connecticut United States Located at the New England Air Museum.

ASME brochure

150 1990 Pin-Ticketing Machine

Early model of first successful price-marking, tag-attachment machine for US retail merchandising.

1902 Miamisburg Ohio United States ASME brochure
151 1991 Victoria Dutch Windmill

Mid-19th-century wind-powered gristmill of Dutch turret-mill style.

1870 Victoria Texas United States ASME brochure
152 1991 Jeep Model MB

Early four-wheel drive, multipurpose field vehicle representing an unusual combination of modern vehicle design.

1947 Toledo Ohio United States ASME brochure
153 1991 Cruquius Pumping Station

19th-century steam pumping station that drained the Haarlemmermeer.

1849 Haarlemmermeer North Holland Netherlands ASME brochure
154 1991 Greens Bayou Generator Plant

The first fully outdoor turbine-generator to be placed in commercial operation.

1949 Houston Texas United States ASME brochure
155 1991 Milam High-rise Air Conditioned Building

The first US air-conditioned high-rise office building.

1928 San Antonio Texas United States ASME brochure
156 1991 Lookout Mountain Incline Railway

19th-century 3-rail incline.

1895 Chattanooga Tennessee United States ASME brochure
157 1991 Pelton Waterwheel Collection

Collection on the origins of the Pelton turbine and its principle of the "splitter" bucket.

ca. 1880 Grass Valley California United States ASME brochure
158 1991 Fresno Scraper

19th-century example of the scraper whose design served as the basis for most giant earth-movers.

1883 Fresno California United States ASME brochure
159 1991 Nassawango Iron Furnace

The earliest surviving hot-blast furnace in the United States.

1828 Snow Hill Maryland United States ASME brochure
160 1992 ABACUS II Integrated-Circuit Wire Bonder

The world's first practical production machine for the assembly of integrated circuits, making possible their economical production.

Dallas Texas United States ASME brochure
161 1992 Q-R-S Marking Piano

One of the first machines to produce master rolls for player pianos by recording actual performances.

1912 Buffalo New York United States ASME brochure
162 1992 Apollo Space Command Module

Apollo command module incorporating many innovations to allow safe transport of humans to moon and back.

1968 Titusville Florida United States ASME brochure
163 1992 Meter-type Gas Odorizer

Early safety device for introducing odor into natural-gas lines to make leaks apparent.

1937 Dallas Texas United States ASME brochure
164 1992 New England Wireless and Steam Museum

Collection of Rhode Island steam engines, including one of the few surviving built at the Corliss Works.

1964 East Greenwich Rhode Island United States ASME brochure
165 1992 Old Mill in Nantucket

The oldest operating smock-type windmill in the United States.

1746 Nantucket Massachusetts United States ASME brochure
166 1992 Milwaukee River Flushing Station
A water pump which reduced the concentration of pollutants in an urban stream had the world's greatest capacity.
1888 Milwaukee Wisconsin United States Now part of coffee shop.

ASME brochure

167 1993 Ginaca Pineapple Processing Machine

Example of automated peeling and slicing machine that led to commercial pineapple production.

1911 Honolulu Hawaii United States ASME brochure
168 1993 Pegasus 3 Engine BS 916

Earliest surviving example of the prototype engine for vertical/short takeoff and landing (V/STOL) jets, namely Harriers and AV-8Bs

1960 Bristol South West England United Kingdom ASME brochure
169 1993 Cryogenic Cooling System, Fermilab Tevatron

The largest cryogenic system ever built, providing benchmark for superconducting magnet designs.

1983 Batavia Illinois United States ASME brochure
170 1993 Advanced Engine Test Facility at Marshall

Unique cooling system for the testing of aerospace engines.

1964 Redstone Arsenal Alabama United States ASME brochure
171 1993 Voyager Spacecraft Interplanetary Explorers

The two most intelligent machines ever built by NASA space program.

1972–1977 Pasadena California United States Located at Jet Propulsion Laboratory.

ASME brochure

172 1994 Bay City Walking Dredge

The last remaining dredge in the United States with unique propulsion system, designed for a wetlands environment.

1924 Naples Florida United States ASME brochure
173 1994 Burton Farmers Gin Mill

The earliest known survivor of an integrated cotton ginning system widely used in the southern United States.

1914 Burton Texas United States ASME brochure
174 1994 Crown Cork and Soda Filling Machine

One of two surviving automated machines that founded the bottling industry.

1892 Baltimore Maryland United States ASME brochure
175 1994 Bergen County Steam Collection

A collection of operational steam engines and auxiliary equipment from the 19th century to the 1940s.

1987 Hackensack New Jersey United States ASME brochure
176 1994 Union Pacific Big Boy 4023 and Centennial 6900

Two heavy-tonnage locomotives incorporating the best features of the day.

1941 Omaha Nebraska United States ASME brochure
177 1994 Barker Turbine/Hacienda Buena Vista

The only known example of a Barker hydraulic turbine, the earliest practical reaction type.

1853 Ponce Puerto Rico United States ASME brochure
178 1994 Boeing 367-80

Prototype of the Boeing 707 and most jet transport systems, establishing economic feasibility of commercial air travel.

1954 Fairfax County Virginia United States Located at Steven F. Udvar-Hazy Center.

ASME brochure

179 1994 Newell Shredder

The second and earliest surviving automobile shredder for recycling scrap metal.

1969 San Antonio Texas United States ASME brochure
180 1994 Johnstown Incline

One of the world's steepest vehicular inclines, typical of several built in the 19th century in Western Pennsylvania.

1891 Johnstown Pennsylvania United States ASME brochure
181 1994 BF Clyde's Cider Mill

The oldest steam powdered cider mill in the US. A rare survivor of a once-commonplace rural US industry.

1898 Mystic Connecticut United States ASME brochure
182 1995 Knight Foundry and Machine Shop

One of the earliest US water-powered foundry-machine shops, including Knight impulse turbines.

1873 Sutter Creek California United States ASME brochure
183 1995 Wright Field 5-foot Wind Tunnel

Early example of the "modern" wind tunnel for aircraft-model testing.

1921 Wright-Patterson Air Force Base Ohio United States ASME brochure
184 1995 Gravimetric Coal Feeder

The earliest known coal feeder, representing innovations that influenced nearly all industries using coal-fired boilers.

1957 Cleveland Ohio United States ASME brochure
185 1995 Ljungström Air Preheater

Experimental model of the industrial air preheater, now used worldwide.

1920 Stockholm Stockholm County Sweden ASME brochure
186 1995 Steamboat William G. Mather

Prototypical ore boat on the Great Lakes.

1925 Cleveland Ohio United States ASME brochure
187 1996 NASA Ames Unitary Plan Wind Tunnel

R&D facility for testing of supersonic aircraft and spacecraft.

1956 Mountain View California United States ASME brochure
188 1996 Garfield Thomas Water Tunnel

Unique experimental facility for hydrodynamic research and testing.

1949 State College Pennsylvania United States Located at Pennsylvania State University.

ASME brochure

189 1996 Montgomery Glider

First heavier-than-air human-carrying aircraft to achieve controlled piloted flight.

1883 San Carlos California United States Located at Hiller Aviation Museum.

ASME brochure

190 1996 Hart Parr Tractor

Earliest known internal-combustion-engined agricultural tractor in the United States.

1903 Charles City Iowa United States ASME brochure
191 1996 SS Badger Carferry

One of the last operating American steam lake boats with reciprocating engines and coal-fired boilers.

1952 Ludington Michigan United States ASME brochure
192 1996 Thermo King© C Refrigeration Unit

Earliest known refrigeration unit for trucks, having worldwide impact on food preservation.

1940 Minneapolis Minnesota United States ASME brochure
193 1997 Alligator Amphibian

Prototype of all tracked ship-to-shore landing vehicles.

1940 Quantico Virginia United States Located at the Marine Corps Air-Ground Museum.

ASME brochure

194 1997 Kew Bridge Cornish Beam Engines

Five notable 19th-century Cornish beam engines for municipal water supply.

1975 Brentford Greater London United Kingdom ASME brochure
195 1997 Bay Area Rapid Transit System

The most advanced automated urban rail transit system incorporating many innovations, marking a new generation of rail travel.

1972 San Francisco Bay Area California United States ASME brochure
196 1997 Bessemer Conversion Engine

An early example of the successful conversion of steam engines to internal-combustion engines.

ca. 1900 Rockford Michigan United States ASME brochure
197 1998 David Taylor Model Basin

Among the world's largest test facilities for the development of ship design.

1939 Bethesda Maryland United States ASME brochure
198 1998 GE's Ultra High Pressure Apparatus for the Production of Diamonds

First apparatus to consistently produce industrial diamonds, demonstrating fundamentals of producing and containing very high pressures and becoming the basis for the industrial-diamond production that followed.

1954 Schenectady New York United States Located at the Schenectady Museum.

No ASME brochure available

199 1998 Hulett Ore Unloaders

The largest and oldest surviving example of a highly efficient materials-handling machine unique to the Great Lakes that revolutionized ore handling and led to its rapid adoption throughout the lower-lake ore ports.

1912 Cleveland Ohio United States 2000: 2 of the 4 loaders have been demolished and scrapped, while the other 2 were disassembled.

ASME brochure

200 1998 Paddle Steamer Uri

The oldest operating vessel with a diagonal, compound steam engine, with disc valve gear.

1901 Lucerne Lucerne Switzerland ASME brochure
201 1998 Cooper Steam Traction Engine Collection

Engines from the collection are among the oldest surviving agricultural steam engines, from 1860 to 1883, showing the conversion to mechanized farming.

1860–1883 Mount Vernon Ohio United States Located at the Knox County Historical Society.

ASME brochure

202 1998 William Tod Rolling-Mill Engine

Representative of steam-powered rolling-mill-engine drives early in the transition to electric drive and typical of the largest work pieces produced by U.S. foundries and forges.

1914 Youngstown Ohio United States No ASME brochure available
203 1998 Siegfried Marcus Car

Direct predecessor of the modern automobile.

ca. 1875 Vienna Austria Located at the Technical Museum, Vienna.

No ASME brochure available

204 1999 Kinne Water Turbine Collection

The largest collection of American turbine development.

1907–1937 Watertown New York United States Located at the Jefferson County Historical Society.

ASME brochure

205 1999 Peterborough Hydraulic (Canal) Lift Lock

The world's highest operating hydraulic lift lock, operating on the balance principle.

1904 Peterborough Ontario Canada No ASME brochure available
206 1999 Merrill Wheel Balancing System

Innovative method of wheel balancing (on the vehicle) adopted worldwide.

1945 Englewood Colorado United States No ASME brochure available
207 2000 Refrigeration Research Museum

A private collection that represents many of the advances in mechanical refrigeration for US residential and commercial use from the late 19th century up to 1960.

1890–1960 Brighton Michigan United States ASME brochure
208 2000 Fairbanks-Morse Y-VA Engine Diesel

The earliest (perhaps only) existing example of early high-compression, cold-start, full-diesel engines developed in the United States for isolated or rural power generation machinery before widespread electrification was available.

1924 Lee County Florida United States ASME brochure
209 2000 USS Albacore

An experimental submarine that pioneered the teardrop-shaped hull, high-strength steel, and many other test concepts affecting speed, depth changes, and underwater maneuvering.

1953 Portsmouth New Hampshire United States ASME brochure
210 2000 Link C-3 Flight Trainer

An early flight simulator representative of the first truly effective mechanical device used to simulate actual flight processes.

ca. 1935 Binghamton New York United States ASME brochure
211 2000 Tokaido Shinkansen

The world's first high-speed railway, which operated at about 210 km/h (130 mph).

1964 Tokyo to Shin-Ōsaka Japan No ASME brochure available
212 2000 EIMCO Rocker Shovel Loader, Model 12B

The first successful mining device to replace human labor in removing the rubble from underground hard-rock blasting.

1938 Park City Utah United States Plaque located at Miners Plaza in historic Old Park City.

ASME brochure

213 2000 George W. Woodruff School of Mechanical Engineering

Leader in transforming mechanical engineering education from a shop-based, vocational program to a professional one built on rigorous academic and analytical methods.

1888 Atlanta Georgia United States ASME brochure
214 2001 Colvin Run Mill

A good example of a typical early 19th-century (US) water-powered, Evans-type flour mill, restored into operating condition.

ca. 1810 Great Falls Virginia United States ASME brochure
215 2001 Coolspring Power Museum

An impressive variety of internal combustion engines, built primarily between 1890 and 1920 and consisting mainly of stationary engines used in industrial applications.

1890–1929 Coolspring Pennsylvania United States ASME brochure
216 2001 Arecibo Observatory

The largest single-aperture radio telescope ever constructed.

1963 Arecibo Puerto Rico United States Joint designation with IEEE.

ASME brochure

217 2001 Radio City Music Hall Hydraulically Actuated Stage

One of the largest movable stages in the world with innovative hydraulic equipment and controls, a forerunner of other stage designs as well as early aircraft carrier elevator systems.

1932 New York New York United States No ASME brochure available
218 2002 Apollo Lunar Module LM-13

First piloted vehicle designed to operate solely in the vacuum of space.

1972 Garden City New York United States Located at the Cradle of Aviation Museum.

ASME brochure

219 2002 Howard Hughes Flying Boat, HK-1

The largest wood-constructed and the largest wingspan airplane ever built.

1947 McMinnville Oregon United States Located at the Evergreen Aviation & Space Museum.

ASME brochure

220 2002 Pilatusbahn

The world's steepest cog railway.

1882 Mount Pilatus Switzerland ASME brochure
221 2002 Brandywine River Powder Mills

The largest U.S. maker of explosive black powder, a once-important and now-obsolete 19th-century technology.

1803–1921 Wilmington Delaware United States ASME brochure
222 2002 Ditch Witch® DWP Service-Line Trencher

The first mechanized, compact service-line trencher.

1952 Perry Oklahoma United States ASME brochure
223 2003 Solar Energy and Energy Conversion Laboratory

Pioneering developments in solar-energy applications, with global accomplishments in training and innovation.

1954 Gainesville Florida United States ASME brochure
224 2003 Wright Flyer III

The first practical airplane.

1905 Dayton Ohio United States Located at the Dayton Aviation Heritage National Historical Park.

ASME brochure

225 2003 Rumely Companies' Agricultural Products

Produced a line of agricultural equipment that played a vital role in the evolution of farming.

1853 La Porte Indiana United States ASME brochure
226 2003 Eddystone Station Unit #1

The second U.S. (earliest extant) supercritical steam-electric generating unit, pioneering significant increases in steam pressure, steam temperature, and unit size.

1960 Eddystone Pennsylvania United States ASME brochure
227 2003 First Ram-Type Blowout Preventer (BOP)

First ram-type blowout preventer, which sealed the wellhead and controlled pressure during drilling and oil production operations.

1922 Houston Texas United States ASME brochure
228 2003 Philo 6 Steam-Electric Generating Unit

The world's first commercial supercritical steam-electric generating unit.

1957 Columbus Ohio United States ASME brochure
229 2003 Great Northern 2313 — Montana Western 31 Gas

The oldest-surviving Electro-motive Company (EMC) gas-electric rail motorcar and the oldest with Lemp control.

1925 North Freedom Wisconsin United States Located at the Mid-Continent Railway Museum.

ASME brochure

230 2004 Lapeyre Automatic Shrimp Peeling Machine

For decades, the elegantly simple Model A has proven to be the most effective and widely used method of automatic shrimp peeling, despite attempts by others to develop alternative approaches.

1949 Biloxi Mississippi United States ASME brochure
231 2004 R.G. Letourneau Mountain Mover

This innovative scraper moved four times as much earth as conventional machines of the era which required a tractor and two operators.

1922 Longview Texas United States ASME brochure
232 2004 Reuleaux Collection Of Kinematic Mechanisms

The world's largest collection of 19th-century kinematic mechanisms.

1882 Ithaca New York United States Located at Cornell University.

ASME brochure

233 2005 Model T

15 millionth Model T to come off the assembly line, marking the end of its production.

1908–1927 Dearborn Michigan United States Located at The Henry Ford museum.

ASME brochure

234 2005 The United States Standard Screw Threads

The first US system of standardized screw threads.

1864 Philadelphia Pennsylvania United States ASME brochure
235 2005 Ottmar Mergenthaler's Square Base Linotype Machine

One of two surviving square-base linotypes.

1886 Carson California United States Located at the International Printing Museum.

No ASME brochure available

236 2005 Birome Ballpoint Pen Collection

First ballpoint pens; utilized the concept of a quick-drying ink whose flow is controlled by gravity and a metal ball housed in a socket.

1938–1948 Buenos Aires Argentina ASME brochure
237 2005 Eiffel Drop Test Machine and Wind Tunnel

Most accurate to date drop-test device and wind tunnel to measure drag on falling objects of various shapes.

1903 & 1912 Paris France ASME brochure
238 2006 Grumman Wildcat "Sto-Wing" Wing-folding Mechanism[5]

First functional wing-folding mechanism, enabling aircraft to take up less space on ships.

Kalamazoo Michigan United States Located at Air Zoo aviation museum.

ASME brochure

239 2006 Hughes Glomar Explorer

A deep-sea drillship platform initially built for the United States Central Intelligence Agency Special Activities Division secret operation Project Azorian to recover the sunken Soviet submarine, K-129, lost in April 1968.

1972 Houston Texas United States ASME brochure
240 2006 Cooper-Bessemer Type GMV Integral-Angle Gas E

Providing efficient compression energy for natural gas, petrochemical, refinery, and power industries around the world.

1944 Mount Vernon Ohio United States Located at the Knox County Historical Museum.

ASME brochure

241 2006 Noria al-Muhammadiyya

A set of seventeen large water wheels operating on the River Orontes as they have for many centuries.

1361 Hama Hama Governorate Syria ASME brochure
242 2006 Split-Hopkinson Pressure Bar Apparatus (1962)

The first apparatus able to directly generate a complete dynamic (high-rate) stress-strain curve in a single experiment.

1962 San Antonio Texas United States ASME brochure
243 2008 Digital Micromirror Device

Modulating digital light pulses using up to 2 million micromirrors.

1996 Plano Texas United States ASME brochure
244 2008 Johnson Controls Multi-Zone Automatic Temperature Control System

The first automated temperature control system for multi-zone applications.

1895 Milwaukee Wisconsin United States Located at Johnson Controls HQ bldg.

ASME brochure

245 2008 John Penn & Sons Oscillating Steam Engine

The first steam engine to utilize oscillatory cylinders. Installed in the steamboat Diesbar.

1841 Dresden Saxony Germany ASME brochure
246 2009 Hughes Two-Cone Drill Bit

Key technology that allowed drilling through medium and hard rock, tapped vast oil reservoirs much deeper below the surface than previously possible, and significantly improved the efficiency and cost of drilling.

1908 The Woodlands Texas United States ASME brochure
247 2010 Belle of Louisville

The oldest operating "western rivers" steamboat.

1914 Louisville Kentucky United States ASME brochure
248 2011 Southern Railway Spencer Shops

One of the few remaining intact 20th-century railroad locomotive facilities in the United States.

1896 Spencer North Carolina United States Now the North Carolina Transportation Museum.

ASME brochure

249 2011 Sholes & Glidden 'Type Writer'

Represents the first commercially successful typewriter to be manufactured in quantity for sale to the public.

1873 Milwaukee Wisconsin United States Located at the Milwaukee Public Museum.

ASME brochure

250 2012 Mr. Charlie Oil Drilling Rig

The first offshore drilling rig that was fully transportable, submersible and self-sufficient.

1953 Morgan City Louisiana United States ASME brochure
251 2012 Textile Machinery Collection at the American Textile History Museum

Represents some of the most significant collection of 19th century tools and machinery for the manufacturing of textiles.

1960 Lowell Massachusetts United States Museum closed in 2016. ASME brochure
252 2013 Big Surf Waterpark

The first wave pool in North America to consistently generate 3–5 foot spilling waves suitable for surfing.

1969 Tempe Arizona United States ASME brochure
253 2013 Titan Crane

The largest crane of the hammer-head or "Titan" type.

1907 Clydebank West Dunbartonshire United Kingdom No ASME brochure available
254 2013 Collection of the Earliest Self-Governing Windmills

The Collection contains many early windmills.

1870 Batavia Illinois United States Batavia, IL was the location of 6 'American Farm Windmill' makers from about 1870 until WWII.

ASME brochure

255 2013 Apollo Space Suit

Model A7L was the primary suit worn by astronauts on Project Apollo.

1968 Frederica Delaware United States ASME brochure
256 2014 Thrust Supersonic Car (ThrustSSC)

The first car to officially exceed the speed of sound, the ThrustSSC Supersonic Vehicle.

1997 Coventry United Kingdom ASME brochure
257 2015 Northern Pacific Rotary Snow Plow No. 2

The first machine to reliably remove deeply packed snow from railroad tracks.

1887 Duluth Minnesota United States ASME brochure
258 2015 Technology Collection at the George Eastman House

The world's preeminent museum of photography with many important artifacts.

1949 Rochester New York United States ASME brochure
259 2015 Funicular Giessbach, designed by Carl Roman Abt

The first funicular to employ a single, two-rail track, with a short side track for the two cars to pass at midpoint. The passing track used turnouts with no moving parts known as Abt Switches.

1879 Giessbach Brienz Switzerland ASME brochure
260 2016 Pratt & Whitney R-1340 Wasp engine

The Wasp R-1340 was a significant improvement to the radial aircraft engine design, making commercial aviation viable as early as the 1920s.

Pratt and Whitney Wasp 1925 Windsor Locks Connecticut United States ASME brochure
261 2016 3D Printing: Stereolithography

First commercially available 3D Printer, developed by Charles Hull.

Stereolithography apparatus 1984 Rock Hill South Carolina United States ASME brochure
262 2016 Worthington Direct Acting Steam Pumps

The pumps built by the firm of Worthington & Baker with worldwide industrial applications.

1838 Newport News Virginia United States Henry Worthington was a founder of ASME.

ASME brochure

263 2016 Rainhill Locomotive Trials

An important competition in the early days of steam locomotive railways. Five engines competed along a mile length of level track.

1829 Rainhill Lancashire United Kingdom ASME brochure
264 2017 Museo Storico dei Motori e dei Meccanismi

Museum of Engines and Mechanisms: Stationary and transportation power units, with an emphasis on automotive and aircraft engines.

Museum of Engines and Mechanisms - University of Palermo (Italy) February 25, 2011 Palermo Sicily Italy Located at the University of Palermo.

ASME brochure

265 2018 Single Crystal Turbine Blade

Single crystal turbine blades have no crystalline boundaries, resulting in greater resistance to fracture and corrosion as well as vastly improved creep performance than conventional multi-crystalline nickel-cobalt alloy blades. Developed by Pratt & Whitney.

1960s Windsor Locks Connecticut United States ASME brochure
266 2018 Carpet Tufting Apparatus

Invented by Ernest Moench, the machinery featured a durable needle that punched loops of thick fabric through a web of backing material, resulting in the reliable, high-speed tufting of carpet. Descendants of the apparatus fabricate more than three-quarters of the carpets produced in the US.

1928 Dalton Georgia United States ASME brochure
267 2018 Janney Railcar Coupler

Recognized for its impact on rail safety and its technological significance. The interlocking coupler, which resembled a curled human hand, was the successor to the "link and pin" coupler, a device that required rail workers to stand between train cars while joining them-—a dangerous procedure that resulted in numerous injuries and deaths.

1873 United States ASME brochure
268 2018 Princeton Plasma Physics Laboratory

The laboratory has been at the forefront of the quest to develop magnetically controlled fusion energy since its founding by Lyman Spitzer, who invented the stellarator, or "star generator".

NSTX Princeton New Jersey United States ASME brochure
269 2019 Johannes Gutenberg's system of movable type system

Gutenberg's movable type system reduced the time and cost of producing the printed word, resulting in the widespread availability of books and the advancement of literacy. His system incorporated a fast-drying ink; a durable easy-to-cast metal alloy for making type; a screw press designed for rapid operation; and an adjustable mold for the quick casting of metal type.

1440 Strasbourg France virtual landmark

ASME brochure (coming soon)

270 2019 The Thurston Collection of Laboratory Artifacts at Cornell University

The devices used at Cornell between 1885 and 1905, exemplify Robert Henry Thurston's vision of the central role of the engineering laboratory in training mechanical engineers

1885-1905 Ithaca New York United States ASME brochure
271 2019 Antikythera Mechanism

The earliest known analog computer, an inscribed astronomical and calendrical device, designed to predict astronomical phenomena such as lunar and solar eclipses, as well as other functions.

2nd C. BCE Athens Greece ASME brochure (coming soon)
272 2019 West Point Foundry

Major American ironworking and machine shop site, operating from 1818 to early 20thC. It became most famous for its production of Parrott rifle artillery and other munitions, although it also manufactured a variety of iron products for civilian use.

1818 Cold Spring New York United States West Point Foundry Preserve A/V tour (Scenic Hudson).

ASME brochure

273 2019 Westinghouse Automatic Air Brake

In 1869, George Westinghouse patented an automatic air brake system for railroads. It had a built-in safeguard to apply the brakes on the entire train should it separate. It made possible longer and faster trains and improved the safety of rail transportation.

1872 Pittsburgh Pennsylvania United States ASME brochure
274 2020 Perkins Vapor-Compression Cycle for Refrigeration (Perkins) 1834 England ASME brochure
275 2021 Reflections on the Motive Power of Fire (Carnot) 1824 France virtual landmark
276 2021 Standardized Steam Property Tables 1921 United States ASME brochure
277 2022 Finite Element Analysis 1960s United States virtual landmark
278 2022 Crocodile Locomotive Ce 6/8 II 1918 Erstfeld Uri Switzerland

See also

References

  1. "About the Landmarks Program". American Society of Mechanical Engineers. Retrieved 2018-07-09.
  2. "Landmarks". The American Society of Mechanical Engineers. American Society of Mechanical Engineers. Retrieved 2020-12-28.
  3. NASA (February 1967). "Saturn V Quarterly Report #16 Sep–Nov 1966 Part 1 of 2". NASA. Archived from the original on 2021-12-19. Retrieved February 12, 2011.
  4. Wright, Mike. "Three Saturn Vs on Display Teach Lessons in Space History". Marshall Space Flight Center History Office. Archived from the original on 15 November 2005. Retrieved 10 February 2011.
  5. Dwyer, Larry (19 February 2014). "The Aviation History Online Museum – Grumman F4F Wildcat". aviation-history.com. The Aviation History Online Museum. Retrieved April 2, 2016. The F4F-4 was the first version of the Wildcat to feature a Grumman innovation, the Sto-Wing. The Sto-Wing used a novel approach using a compound angle folding-wing that was unique to Grumman...It was a successful design that was later used on the F6F Hellcat and TBF Avenger.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.