Original disk II controller. Integrated Woz Machine implemented all their logic on a single chip.

The Integrated Woz Machine (or IWM for short) is a single-chip version of the floppy disk controller for the Apple II. It was also employed in Macintosh computers.

History

When developing a floppy drive for the Apple II, Apple Inc. co-founder Steve Wozniak felt that the existing models available on the market were too complicated, expensive and inefficient. Rather than use the existing floppy drives from Shugart Associates, Wozniak decided to use the drive mechanism – but develop his own electronics separately for the both drive and the controller.[1][2]

Wozniak successfully came up with a working floppy drive with a greatly reduced number of electronic components. Instead of storing 8–10 sectors (each holding 256 bytes of data) per track on a 5.25-inch floppy disk — something standard at that time, Wozniak utilized group-coded recording (GCR), and with 5-and-3 encoding he managed to squeeze as many as 13 sectors on each track using the same mechanics and the same storage medium. In a later revision, this number was bumped up to 16 sectors per track with 6-and-2 encoding.[1]

The floppy drive controller board, the "Disk II interface,"[2] was built with 8 ICs, one of which is the PROM, containing tables for the encoder and decoder, the state machine, and some code.

To make it easier to move the controller onto the main board, as in the Apple IIc, Apple IIGS, and Macintosh, Dr. Wendell Sander integrated all these components into one single chip—the IWM.[3]

Application and updates

The IWM is essentially a disk controller on one IC. It was employed in the Apple IIc, and later Apple IIGS, the Apple Lisa 2/10, and all Mac models up to the Macintosh II. Later, an extended version, known as SWIM (Sander-Wozniak Integrated Machine), was introduced. This new version added the capability of reading and writing FM- and MFM-formatted (PC-formatted) floppy disks. In later Mac models, more and more peripheral components were added to the SWIM, until Apple finally phased out floppy drives from the Macs. The floppy controller function still stayed in the chipset for a while, even though the provision of floppy drives for the Macs had already ceased. For instance, the first iMacs still had a floppy drive connector on the motherboard, allowing a floppy drive to be retrofitted by knowledgeable enthusiasts.[4]

See also

References

  1. 1 2 Williams, Gregg; Moore, Rob (January 1985). "The Apple Story / Part 2: More History and the Apple III". BYTE (interview). UBM Technology Group. 10 (1): 167. ISSN 0360-5280. OCLC 637876171. Archived from the original on 2012-02-12. Retrieved 2013-10-26. (NB. Interview with Steve Wozniak, where he describes creating the Apple version of GCR.)
  2. 1 2 "Apple II/II+ Disk Drive interface schematics". Retrieved 2022-07-22.
  3. ↑ "Five Different Macintoshes". www.folklore.org.
  4. ↑ "iMac Floppy Kit". imac-floppy.com. Corporate Systems Center. 2001-04-14. Archived from the original on 2001-04-14. Retrieved 2020-01-24.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.