Spatial multiplexing
2xSMX or STC+2xMRC

Spatial multiplexing or space-division multiplexing (SM, SDM or SMX) is a multiplexing technique in MIMO wireless communication, fibre-optic communication and other communications technologies used to transmit independent channels separated in space.

Fibre-optic communication

In fibre-optic communication SDM refers to the usage of the transverse dimension of the fibre to separate the channels.

Techniques

Multi-core fibre (MCF)

Multi-core fibres are designed with more than a single core. Amongst different types of MCFs exist, “Uncoupled MCF” is the most common in which each core is treated to be an independent optical path resulting in increasing in channel capacity. However, the main limitation to these systems is the presence of inter core crosstalk and ways to deal it as well as the coupling/de-coupling mechanism. Although, in recent times, different splicing techniques, coupling methods and schemes have been proposed and demonstrated and despite many of the component technologies still being in the development stage, MCF systems already present the capability for huge transmission capacity.[1]
Recently, some developed components technologies for multicore optical fiber are demonstrated, such as three-dimensional Y-splitters between different multicore fibers,[2] a universal interconnection among the same fiber cores,[3] and a device for fast swapping and interchange of wavelength-division multiplexed data among cores of multicore optical fiber.[4]

Multi-mode fibres (MMF)

Multi-mode fibers are designed to allow multiple modes to propagate through it where each mode is considered as separate channel enhancing its capacity in contrast to single mode fibre (SMF) that only supports single spatial mode, however MMF has two polarizations.[5] The MMFs are limited by high dispersion and attenuation rate causing the signal quality to be diminished over long distances. In addition to this, the MMFs also suffer from intermodal crosstalk and requires digital signal processing to deal with it.

Mode-division multiplexing (MDM)

Mode-division multiplexing utilizes the transverse spatial modes of the fibre to separate the channels.Mode-division multiplexing (MDM) can be achieved by multiplexing several data inputs into different modes efficiently using multiplexers. There are numerous methods of multiplexing and coupling modes into few mode fibres (FMFs), like photonic lanterns, multi-plane light conversion, and others.

Fibre bundles

Bundled fibres are also considered a form of SDM.

Wireless communications

If the transmitter is equipped with antennas and the receiver has antennas, the maximum spatial multiplexing order (the number of streams) is,

if a linear receiver is used. This means that streams can be transmitted in parallel, ideally leading to an increase of the spectral efficiency (the number of bits per second per Hz that can be transmitted over the wireless channel). The practical multiplexing gain can be limited by spatial correlation, which means that some of the parallel streams may have very weak channel gains.

Encoding

Open-loop approach

In an open-loop MIMO system with transmitter antennas and receiver antennas, the input-output relationship can be described as

where is the vector of transmitted symbols, are the vectors of received symbols and noise respectively and is the matrix of channel coefficients. An often encountered problem in open loop spatial multiplexing is to guard against instance of high channel correlation and strong power imbalances between the multiple streams. One such extension which is being considered for DVB-NGH systems is the so-called enhanced Spatial Multiplexing (eSM) scheme.

Closed-loop approach

A closed-loop MIMO system utilizes Channel State Information (CSI) at the transmitter. In most cases, only partial CSI is available at the transmitter because of the limitations of the feedback channel. In a closed-loop MIMO system the input-output relationship with a closed-loop approach can be described as

where is the vector of transmitted symbols, are the vectors of received symbols and noise respectively, is the matrix of channel coefficients and is the linear precoding matrix.

A precoding matrix is used to precode the symbols in the vector to enhance the performance. The column dimension of can be selected smaller than which is useful if the system requires streams because of several reasons. Examples of the reasons are as follows: either the rank of the MIMO channel or the number of receiver antennas is smaller than the number of transmit antennas.

See also

References

  1. "Multicore Fiber - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2022-08-22.
  2. Awad, Ehab (September 2015). "Multicore optical fiber Y-Splitter". Optics Express. 23 (20): 25661–25674. Bibcode:2015OExpr..2325661A. doi:10.1364/OE.23.025661. PMID 26480082.
  3. Awad, Ehab (January 2018). "Confined optical beam-bending for direct connection among cores of different multi-core fibers". Optical and Quantum Electronics. 50 (2): 69. Bibcode:2018OQEle..50...69A. doi:10.1007/s11082-018-1344-0. S2CID 254897867.
  4. Awad, Ehab (December 2015). "Data interchange across cores of multi-core optical fibers". Optical Fiber Technology. 26: 157. doi:10.1016/j.yofte.2015.10.003.
  5. "Enabling Technologies for High Spectral-efficiency Coherent Optical Communication Networks | Wiley". Wiley.com. Retrieved 2022-08-22.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.