| RSV.22 | |
|---|---|
| Role | training biplane |
| National origin | Belgium |
| Manufacturer | Stampe et Vertongen |
| Designer | Alfred Renard |
| First flight | 1926[1] |
| Primary user | Belgian Air Force[2] |
The Stampe et Vertongen RSV.22[3] was a training biplane produced in Belgium in the 1920s.[4][5]
Design and development
The RSV.22 was a conventional, single-bay biplane with staggered wings of unequal span that were braced with N-struts near their tips.[6] The fixed undercarriage consisted of two mainwheels that were joined by a common through axle, plus a tailskid.[6] The student pilot and the instructor sat in open cockpits in tandem[4][6] that were fitted with dual controls.[2] Construction was of mixed materials, with metal used for the undercarriage, engine mount, and cabane struts.[6] The control surfaces were operated by a rigid linkage made of dural tube.[6] The horizontal stabilizer was adjustable in flight, using a lever in the cockpit to adjust the aircraft's trim.[6] Incorrect use of this latter feature led to a number of accidents.[6] The base model RSV 22/180 was powered by a 134-kW (180-hp) Hispano-Suiza engine, but the aircraft was designed to use powerplants of up to 220 kW (300 hp).[6] The RSV 22/200 variant used a 150-kW (200-hp) Renard-built radial engine in place of the Hispano-Suiza.[6][5]
The Belgian Air Force purchased 20 examples of the RSV 22/180.[6] In 1928, Lt Edmond Thieffry and SLt Philippe Quersin piloted a civil-registered RSV 22/180 (registration O-BAJE) on an attempt at a long-distance flight to Africa.[6] They departed Deurne on 26 June, attempting to reach Kinshasa.[6] Bad weather forced them to land at Mourmelon, France, only 230 km (140 mi) away. Resuming their journey, they were forced down a second time, this time in a marsh at Clapier, near Vauvert, still in France.[6] They abandoned the attempt at this point and successfully returned to Belgium.[6]
Variants
- RSV.22/180
- base model with 130 kW (180 hp) Hispano-Suiza engine (over 20 built)[6]
- RSV.22/200
- version with 150 kW (200 hp) Renard Type 200 radial engine (1 built)[6]
- RSV.22 Titan
- A version powered by a 170 kW (230 hp) Gnome-Rhône 5K 5-cyl. radial engine.
- RSV.22 Lynx
- A version powered by a 160 kW (215 hp) Armstrong Siddeley Lynx 5-cyl. radial engine.
Operators
.svg.png.webp){kind=small}
- Belgian Air Force — 20 × RSV.22/180[6]
Specifications (RSV.22/180)
Data from Les avions Renard and Jane's all the World's Aircraft 1928.[6][7]
General characteristics
- Crew: 2
- Length: 7.6 m (24 ft 11 in)
- Wingspan: 9.12 m (29 ft 11 in)
- Height: 2.7 m (8 ft 10 in)
- Wing area: 22 m2 (240 sq ft)
- Empty weight: 710 kg (1,565 lb)
- Gross weight: 965 kg (2,127 lb)
- Powerplant: 1 × Hispano-Suiza 8Ab V-8 water-cooled piston engine, 130 kW (180 hp)
- Propellers: 2-bladed wooden fixed-pitch propeller
Performance
- Maximum speed: 200 km/h (120 mph, 110 kn)
- Stall speed: 80 km/h (50 mph, 43 kn)
- Service ceiling: 6,000 m (20,000 ft)
- Time to altitude: 2,000 m (6,600 ft) in 7 minutes 20 seconds
- Wing loading: 43.5 kg/m2 (8.9 lb/sq ft)
- Power/mass: 7.2 kg/kW (11.8 lb/hp)
See also
Related lists
Notes
- ↑ Hauet 1984, p.16
- 1 2 Hauet 1984, p.18
- ↑ Stampe et Vertongen designated their designs with two numbers; the first signifying the wing area of the design in square metres, the second signifying the power of the engine in horsepower. Stampe et Vertongen aircraft designed by Alfred Renard gained the prefix "R"
- 1 2 Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions. p. 839.
- 1 2 The Illustrated Encyclopedia of Aircraft. London: Aerospace Publishing. p. 2955.
- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Hauet, André (1984). Les avions Renard. Brussels: Éditions AELR. pp. 7, 9, 18 and 21.
- ↑ Grey, C.G., ed. (1928). Jane's all the World's Aircraft 1928. London: Sampson Low, Marston & company, ltd. pp. 5c–6c.
Bibliography
Further reading
- Gunston, Bill (1993). World Encyclopedia of Aircraft Manufacturers. Annapolis: Naval Institute Press.