Illinois to Logansport

This western section of US 24 is mostly rural two-lane. US 24 enters Indiana from Illinois concurrent with US 52. US 24 and US 52 head east toward Kentland, passing through an intersection with State Road 71 (SR 71). In Kentland, US 24 and US 52 have an intersection with US 41 where US 52 turns south. US 24 heads east from Kentland toward Remington, passing through a concurrency with SR 55. In Remington, US 24 starts a concurrency with US 231. US 24 and US 231 head east toward Wolcott, passing through an interchange with I-65. In Wolcott, US 231 heads south and US 24 heads east toward Reynolds. In Reynolds, US 24 has an intersection with SR 43 and starts a concurrency with US 421. US 24 and US 421 heads east toward Monticello. In Monticello, US 421 heads south with SR 39, US 24 now has a concurrency with SR 39. US 24 and SR 39 head east from Monticello. East of Monticello, SR 39 heads north, while US 24 heads east toward Logansport, passing through Idaville, Burnettsville, and Lake Cicott.^[2]

Logansport to Fort Wayne

This section is a four-lane rural divided highway. US 24 and US 35 have a concurrency around Logansport and have an interchange with SR 25 and an intersection with SR 29. East of Logansport, US 35 heads southeast toward Kokomo. US 24 heads east toward Peru, passing through an interchange with US 31. On the north side of Peru, US 24 has an intersection with SR 19. From Peru, US 24 heads east toward Wabash, passing through an intersection with SR 115. In Wabash, US 24 has intersections with SR 15 and SR 13. US 24 then heads toward Huntington passing through an intersection with SR 524 and a short concurrency with SR 105. On the west side of Huntington, US 24 begins a concurrency with SR 9. US 24 and SR 9 pass through an intersection with US 224/SR 5. North of Huntington, SR 9 heads north and US 24 heads northeast toward Fort Wayne. On the way to Fort Wayne, US 24 passes through an intersection with SR 114. Then, on the west side of Fort Wayne, US 24 enters onto northbound I-69.^[3]

Fort Wayne to Ohio

Exit sign for US 24 on southbound I-469 in New Haven

This section of US 24 is mostly freeway and includes overlaps with two Interstate Highways. US 24 merges onto I-69 heading north at that route's exit 302. US 24 (along with US 30) then leaves I-69 at exit 315 to head east then south along I-469. US 24 runs concurrently with I-469 until the east side of New Haven, passing through interchanges with Maplecrest Read and SR 37 along its path. US 24 leaves I-469 at exit 21 in New Haven, a conventional partial cloverleaf interchange, but, from there, heads northeast toward Ohio as a four-lane mostly Interstate standard rural freeway. After leaving I-469, the US 24 freeway has a substandard (short, low-speed Y-ramps of a right-in/right-out design) interchange with Bruick Road and Old US 24 in rural Allen County. Continuing past a standard diamond interchange at Webster Road, it follows a subsequent interchange with SR 101 in Woodburn. Beyond the SR 101 junction, US 24 enters Ohio, where the freeway ends but the route continues on in the Buckeye State as a four-lane divided rural arterial highway (though full access-control extends past the state line about another two miles [3.2 km]).^[4]

Logansport to Fort Wayne

The original route of US 24 went through the city of Logansport, which then was a two-lane undivided rural highway north of the present four-lane highway from Logansport to a point near New Waverly. From there, the original facility ran south of today's four-lane roadway, through Peru and roughly paralleling the old Wabash Railroad (now Norfolk Southern Railway) mainline tracks into the city of Wabash. Between that city and the Wabash County town of Largo, the old road still is south of the present alignment, but, from there to the west side of Huntington (at SR 9), the present four-lane facility replaced the original two-lane road. US 24 originally went through the city of Huntington but now is bypassed to the west and north by the modern alignment. From east of Huntington to Fort Wayne, the four-lane roadway was built over the two-lane highway, then known as Upper Huntington Road.

Fort Wayne to New Haven

Before US 24 was rerouted onto I-69 and I-469, US 24 passed through both Fort Wayne and its eastern suburb, New Haven. It entered the metropolitan area concurrent with SR 37 on Upper Huntington Road (now Jefferson Boulevard) and picked up another concurrency with former SR 14 at Illinois Road on the west side of the city. This was also the point where Upper Huntington Road transitioned to being Jefferson Boulevard. US 24 and the state roads crossed the St. Marys River in Swinney Park then became split through downtown Fort Wayne on a one-way pair of streets, with Jefferson Boulevard and then Maumee Avenue carrying eastbound traffic and Washington Boulevard handling westbound travel. East of downtown, SR 37 left the one-way pair of Maumee and Washington at Anthony Boulevard, departing to the north. The one-way pair merged onto Washington Blvd just east of Memorial Park, near Edsall Avenue on the east side.

Just east of Fort Wayne, US 24 had an interchange with the Bueter Road alignment of the original 1953 US 30 "Bypass" (later renamed Coliseum Boulevard). From that tight cloverleaf interchange to the east, US 24 and SR 14 were concurrent with US 30 (now SR 930) and they then bridged the Nickel Plate Railroad (now Norfolk Southern Railway) mainline before merging onto New Haven Avenue, heading due east toward that suburb. Then US 24 and SR 14 headed into downtown New Haven, with US 30 splitting off to the south to bypass central New Haven. Just beyond that split, US 24 turned north onto Broadway Street, with SR 14 continuing due east along Dawkins Road to Ohio. On Broadway, US 24 crossed the Nickel Plate railroad mainline at-grade and then curved slightly north-northwest through downtown New Haven before turning east onto Rose Avenue which led out of town (and past the point which later would become the I-469 interchange) as the old alignment which was later replaced by the modern freeway.

In the early 1980s, US 24 was rerouted out of downtown Fort Wayne, following I-69 north to US 30/Coliseum Boulevard (now SR 930), and then following Coliseum Boulevard around the northern and eastern sides of the city to the cloverleaf interchange at Washington Boulevard. When the southeastern portions of I-469 opened to traffic in 1989, US 24 was rerouted again, this time onto I-69 south, then I-469 at I-69's (then exit 96, now exit 296) to the current interchange with US 24 east of New Haven. This resulted in a "doubling back" to the south-southwest from the Jefferson Boulevard interchange (then exit 101, now exit 301) along I-69 to reach I-469's south junction with I-69. Many savvy through travelers on US 24 simply left that route in Huntington County and turned east onto County Road 900 (CR 900) North at Roanoke, which becomes Lafayette Center Road at the Allen County line), and which about six miles (9.7 km) after leaving US 24 deposited them directly onto eastbound I-469 and (at the time) US 24 at the I-69 interchange. Though this deviation was along a two-lane road, it saved them several miles of unnecessary out-of-the-way travel along the officially shielded route.

After the original two-lane alignment east of New Haven along the Maumee River was bypassed by the present four-lane freeway in 2012, US 24 was again officially rerouted to its present posted alignment, using the northern loop of I-469, via I-69 north. Many through travelers, however, still use CR 900 South/Lafayette Center Road (both now widened and improved) to I-469 east and north route as it remains far shorter and more direct than the officially designated US 24 northern bypass of the Summit City and its eastern suburb.

Fort to Port

2008–2012 upgrades

Fort to Port was first brought up in a meeting by Indiana State Representative Mitch Harper, in 1989. The project went from New Haven, to Toledo, Ohio. It was at this meeting the project name "Fort to Port" was born. The most complex and expensive portion of the Indiana segment was to be reconstructing the partial cloverleaf interchange with I-469 in New Haven.

(December 2008) Completed section of US 24 Fort-to-Port Freeway in eastern Indiana. This segment opened to traffic on October 29, 2009.

In November 2007, Indiana announced it would reduce costs by changing its segment to be an expressway with at-grade intersections at Bruick Road, Webster Road, and SR 101, instead of a freeway section with interchanges and overpasses. The only overpasses would be two narrow 12-foot-wide (3.7 m) overpasses for non-motorized traffic (Amish buggies) to cross US 24. Also, the interchange of I-469 and US 24 would remain as is with traffic signals at the US 24 ramp terminals. The cost savings without interchanges would be approximately $75 million–80 million (equivalent to $102 million–109 million in 2022^[5]). Right-of-way would be purchased for future interchanges. This change has been unpopular due to safety concerns with the heavy truck traffic on the corridor. The Indiana Department of Transportation (INDOT) claimed that the current traffic on US 24 does not justify interchanges, even though the 2005 final environmental impact study (EIS) states that it does.

Responding to widespread public outcry over the scaled-back design, Governor Mitch Daniels announced on December 12, 2007, that US 24 would be built as a freeway initially from Bruick Road to the Ohio state line, with interchanges at SR 101 and Webster Road.^[6] The intersection with Bruick Road was to have initially been an at-grade crossing, but INDOT announced in August 2009 that a grade-separated interchange was to be built here as well.^[7] Indiana's entire 13.5-mile (21.7 km) segment of US 24 was completed as a freeway. The interchange with I-469, however, was unchanged and not free-flowing in all traffic movements.

Upon completion, ownership of the existing US 24 was transferred to Allen County and became a frontage road east of Bruick Road, providing access to the BFGoodrich tire plant and adjacent homes and farmland. Indiana financed construction through the Major Moves program and will be reimbursed when federal highway funds become available. Sections of the two-lane road that have been bypassed by the freeway are now locally signed as "Old US 24".

Part of the new US 24 "Fort to Port" freeway in Eastern Indiana in 2018

Governor Daniels and INDOT held the groundbreaking ceremony for the Indiana section on April 30, 2008. By December 2008, crews had completed construction on two miles (3.2 km) of the freeway from the Ohio state line to just east of the SR 101 interchange. On October 29, 2009, Governor Daniels and Ohio Governor Ted Strickland held a ribbon-cutting ceremony at the Indiana–Ohio state line opening the new US 24 highway from SR 101 near Woodburn to State Route 424 near Defiance, Ohio.^[8] The project was designated completed, and the final segment opened on November 4, 2012.^[9]