Wüstite
General
Category	Oxide mineral
Formula (repeating unit)	FeO
IMA symbol	Wüs[1]
Strunz classification	4.AB.25
Crystal system	Cubic
Crystal class	Hexoctahedral (m3m) H–M symbol: (4/m 3 2/m)
Space group	Fm3m (no. 225)
Identification
Color	Greyish white to yellow or brown; colorless in thin section
Crystal habit	Pyramidic, prismatic
Cleavage	{001} perfect
Fracture	Subconchoidal to rough
Mohs scale hardness	5–5.5
Specific gravity	5.88
Density	5.7 g/cm3
Refractive index	1.735–2.32 in synthetic crystals
Pleochroism	None
Solubility	Soluble in dilute HCl
Other characteristics	Forms solid solution with periclase

Crystal structure of Wüstite

Wüstite (FeO, sometimes also written as Fe_0.95O) is a mineral form of mostly iron(II) oxide found with meteorites and native iron. It has a grey colour with a greenish tint in reflected light. Wüstite crystallizes in the isometric-hexoctahedral crystal system in opaque to translucent metallic grains. It has a Mohs hardness of 5 to 5.5 and a specific gravity of 5.88. Wüstite is a typical example of a non-stoichiometric compound.

Wüstite was named after Fritz Wüst (1860–1938), a German metallurgist and founding director of the Kaiser-Wilhelm-Institut für Eisenforschung (presently Max Planck Institute for Iron Research GmbH).^[2]

In addition to its type locality in Germany, it has been reported from Disko Island, Greenland; the Jharia coalfield, Jharkhand, India; and as inclusions in diamonds in a number of kimberlite pipes. It also is reported from deep sea manganese nodules.

Its presence indicates a highly reducing environment.

Wüstite redox buffer

Iron minerals on the earth's surface are typically richly oxidized, forming hematite, with Fe³⁺ state, or in somewhat less oxidizing environments, magnetite, with a mixture of Fe³⁺ and Fe²⁺. Wüstite, in geochemistry, defines a redox buffer of oxidation within rocks at which point the rock is so reduced that Fe³⁺, and thus hematite, is absent.

As the redox state of a rock is further reduced, magnetite is converted to wüstite. This occurs by conversion of the Fe³⁺ ions in magnetite to Fe²⁺ ions. An example reaction is presented below:

${\displaystyle {\ce {{\underset {magnetite}{FeO.Fe2O3}}+{\underset {graphite/diamond}{C}}->{3FeO}+{\underset {carbon\ monoxide}{CO}}}}}$

The formula for magnetite is more accurately written as FeO·Fe₂O₃ than as Fe₃O₄. Magnetite is one part FeO and one part Fe₂O₃, rather than a solid solution of wüstite and hematite. The magnetite is termed a redox buffer because until all Fe³⁺ magnetite is converted to Fe²⁺ the oxide mineral assemblage of iron remains wüstite-magnetite, and furthermore the redox state of the rock remains at the same level of oxygen fugacity. This is similar to buffering in the H⁺/OH⁻ acid–base system of water.

Once the Fe³⁺ is consumed, then oxygen must be stripped from the system to further reduce it and wüstite is converted to native iron. The oxide mineral equilibrium assemblage of the rock becomes wüstite–magnetite–iron.

In nature, the only natural systems which are chemically reduced enough to even attain a wüstite–magnetite composition are rare, including carbonate-rich skarns, meteorites, fulgurites and lightning-affected rock, and perhaps the mantle where reduced carbon is present, exemplified by the presence of diamond or graphite.

Role in nitrogen fixation

Approximately 2-3% of the world's energy budget is allocated to the Haber process for ammonia (NH₃) production, which relies on wüstite-derived catalysts. The industrial catalyst is derived from finely ground iron powder, which is usually obtained by reduction of high-purity magnetite (Fe₃O₄). The pulverized iron metal is burnt (oxidized) to give magnetite or wüstite of a defined particle size. The magnetite (or wüstite) particles are then partially reduced, removing some of the oxygen in the process. The resulting catalyst particles consist of a core of magnetite, encased in a shell of wüstite, which in turn is surrounded by an outer shell of iron metal. The catalyst maintains most of its bulk volume during the reduction, resulting in a highly porous high-surface-area material, which enhances its effectiveness as a catalyst.^[3][4]

Historical use

According to Vagn Fabritius Buchwald, wüstite was an important component during the Iron Age to facilitate the process of forge welding. In ancient times, when blacksmithing was performed using a charcoal forge, the deep charcoal pit in which the steel or iron was placed provided a highly reducing, virtually oxygen-free environment, producing a thin wüstite layer on the metal. At the welding temperature, the iron becomes highly reactive with oxygen, and will spark and form thick layers of slag when exposed to the air, which makes welding the iron or steel nearly impossible. To solve this problem, ancient blacksmiths would toss small amounts of sand onto the white-hot metal. The silica in the sand reacts with the wüstite to form fayalite, which melts just below the welding temperature. This produced an effective flux that shielded the metal from oxygen and helped extract oxides and impurities, leaving a pure surface that can weld readily. Although the ancients had no knowledge of how this worked, the ability to weld iron contributed to the movement out of the Bronze Age and into the modern.^[5]

Related minerals

Wüstite forms a solid solution with periclase (MgO), and iron substitutes for magnesium. Periclase, when hydrated, forms brucite (Mg(OH)₂), a common product of serpentinite metamorphic reactions.

Oxidation and hydration of wüstite forms goethite and limonite.

Zinc, aluminium, and other metals may substitute for iron in wüstite.

Wüstite in dolomite skarns may be related to siderite (iron(II) carbonate), wollastonite, enstatite, diopside, and magnesite.

See also

• Normative mineralogy
• Skarn

References

• Mineral Data Pub. PDF file Accessed 3/5/2006
• Euromin Accessed 3/5/2006
• Wüstite on Mindat.org Accessed 3/5/2006
• Webmineral data Accessed 3/5/2006