Abarth Simca 2000
Overview
ManufacturerAbarth and Simca
Production1963-1965[1][2]
AssemblyTurin, Italy
Body and chassis
LayoutRR layout
RelatedFiat Abarth OT 1300
Powertrain
Power output140 hp (103 kW)[3]
Dimensions
Length3.609 m (11.84 ft)
Width1.48 m (4.9 ft)
Height1.199 m (3.93 ft)

The Abarth Simca 2000 was an Italian high-performance automobile produced in the 1960s as a collaborative project of the Simca and Abarth companies in Turin, Italy.

Product description

The A-S 2000 was a coupé powered by a four-cylinder Abarth engine of 1946.27 cc, rated at 202 PS (149 kW). Its maximum speed was listed as 168 mph (270 km/h). Its overall length was 11.84 ft (3.61 m), overall width was 4.85 ft (1.48 m), height was 3.93 ft (1.20 m), its wheelbase was 6.86 ft (2.09 m), its front track was 4.167 ft (1.270 m), and its rear track was 4.27 ft (1.30 m). Its fuel tank held 6.6 imperial gallons, although optional tanks of 12.1, 18.7 and 24.2 imperial gallons were also available. Its empty weight was 1,518 lb (689 kg).

The radiator-cooling inlet was a low-set oval in a forward-thrusting nose; there was no obvious forward bumper. The two headlights were set under transparent fairings. The bonnet was long and markedly sloped. Its windshield was more highly sloped than most contemporary vehicles. An upturned air deflector was mounted atop the rear trunk.

The gasoline tank was filled through a lid-covered cap located at the upper-right hand corner of the nearly-flat rear window.

References

  1. "Abarth Simca 2000 GT". Retrieved 21 May 2022.
  2. "1965 Abarth Simca 2000 GT Corsa". Retrieved 21 May 2022.
  3. "Abarth Simca 2000 – Car Profile". Retrieved 1 July 2022.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.