Prima | |
---|---|
Role | Paraglider |
National origin | Israel |
Manufacturer | Apco Aviation |
Status | In production (Prima 4, 2016) |
Produced | early 1990s - present |
The Apco Prima (English: first) is an Israeli single-place, paraglider that was designed and produced by Apco Aviation of Caesarea. It has been in production since the early 1990s and remained in production through 2016.[1][2]
Design and development
The Prima was designed as a beginner glider for use in flight training of students for both gliding and paramotor flying.[1][2]
The glider is made from Gelvenor 42 g/m2 "Zero Porosity" ripstop nylon.[2]
The design has progressed through four generations of models, the Prima, Prima 2, 3 and 4, each improving on the last. The Prima 4 incorporates leading edge battens and an improved landing flare capability. The models are each named for their rough wing area in square metres.[1][2]
Variants
- Prima II 22
- Small-sized model for lighter pilots. Its 8.51 m (27.9 ft) span wing has a wing area of 22.5 m2 (242 sq ft), 20 cells and the aspect ratio is 3.22:1. The pilot weight range is 50 to 65 kg (110 to 143 lb).[1]
- Prima II 30
- Large-sized model for heavier pilots. Its 10.76 m (35.3 ft) span wing has a wing area of 29.40 m2 (316.5 sq ft), 25 cells and the aspect ratio is 3.94:1. The pilot weight range is 80 to 100 kg (176 to 220 lb). The glider model is AFNOR Standard certified.[1]
- Prima 4 22
- Extra small-sized model for lighter pilots. Its 8.51 m (27.9 ft) span wing has a wing area of 22.5 m2 (242 sq ft), 20 cells and the aspect ratio is 3.22:1. The glider empty weight is 4.6 kg (10 lb) and the pilot weight range is 50 to 65 kg (110 to 143 lb). The glider model is not certified.[2]
- Prima 4 24
- Small-sized model for light-weight pilots. Its 8.96 m (29.4 ft) span wing has a wing area of 23.9 m2 (257 sq ft), 21 cells and the aspect ratio is 3.36:1. The glider empty weight is 4.8 kg (11 lb) and pilot weight range is 60 to 78 kg (132 to 172 lb). The glider model is CEN/AFNOR Standard certified.[2]
- Prima 4 27
- Mid-sized model for medium-weight pilots. Its 9.86 m (32.3 ft) span wing has a wing area of 26.7 m2 (287 sq ft), 23 cells and the aspect ratio is 3.65:1. The glider empty weight is 5.4 kg (12 lb) and pilot weight range is 70 to 90 kg (154 to 198 lb). The glider model is CEN/AFNOR Standard certified.[2]
- Prima 4 30
- Large-sized model for heavier pilots. Its 10.76 m (35.3 ft) span wing has a wing area of 29.4 m2 (316 sq ft), 25 cells and the aspect ratio is 3.94:1. The glider empty weight is 5.9 kg (13 lb) and pilot weight range is 80 to 100 kg (176 to 220 lb). The glider model is CEN/AFNOR Standard certified.[2]
- Prima 4 33
- Extra large-sized model for heavier pilots. Its 11.66 m (38.3 ft) span wing has a wing area of 32.14 m2 (346.0 sq ft), 27 cells and the aspect ratio is 4.2:1. The glider empty weight is 6.4 kg (14 lb) and pilot weight range is 95 to 120 kg (209 to 265 lb). The glider model is not certified.[2]
Specifications (Prima II 30)
Data from Bertrand[1]
General characteristics
- Crew: one
- Wingspan: 10.76 m (35 ft 4 in)
- Wing area: 29.40 m2 (316.5 sq ft)
- Aspect ratio: 3.94:1
Performance
- Maximum speed: 39 km/h (24 mph, 21 kn)
- Rate of sink: 1.3 m/s (260 ft/min)