Bavarian B IX
Number(s):1081–10921069–1080
Quantity:1212
Manufacturer:Keßler, MaffeiMaffei
Year(s) of manufacture:1857–18581859ff.
Retired:19261903
Wheel arrangement (Whyte):4-2-02-2-2
Axle arrangement (UIC):2A n21A1 n2
Track gauge:1,435 mm (4 ft 8+12 in)
Length over buffers:13,710 mm (44 ft 11+34 in)11,850 mm (38 ft 10+12 in)
Service weight:25.9 t (25.5 long tons; 28.5 short tons)
Adhesive weight:10.5 t (10.3 long tons; 11.6 short tons)
Top speed:90 km/h (56 mph)
Driving wheel diameter:1,828 mm (6 ft 0 in)
Leading wheel diameter:1,220 mm (4 ft 0 in)
Trailing wheel diameter:1,220 mm (4 ft 0 in)
No. of cylinders:Two
Cylinder bore:394 mm (15+12 in)
Piston stroke:610 mm (24 in)
Boiler overpressure:6 kgf/cm2 (590 kPa; 85 lbf/in2)
Grate area:1.13 m2 (12.2 sq ft)1.12 m2 (12.1 sq ft)
Evaporative heating area:83.20 m2 (895.6 sq ft)80.00 m2 (861.1 sq ft)
Tender:3 T 7
Water capacity:7.0 m3 (1,500 imp gal; 1,800 US gal)

The Bavarian Class A, later B IX were German steam locomotives with the Bavarian Eastern Railway (Bayerische Ostbahn).

Crampton version

The engines had an external frame with outside drive and valve gear. They had the smallest wheel diameter (1,828 mm) of any locomotive of this type in the whole of Germany. Between 1869 and 1871 all the engines were rebuilt in Regensburg and were given a 1 B axle arrangement. They were then given locomotive numbers 1081–1092.

Stephenson version

The second series of this class was built to a Stephenson design. They did not differ greatly in terms of boiler and driving gear from the locomotives of the first series. These engines were also converted in Regensburg between 1870 and 1871 to vehicles with a 1B axle formula. In addition the boiler overpressure was raised from 6 to 10 bar. They were then given locomotive numbers 1069–1080.

Tender

Both series were equipped with 3 T 7 tenders.

See also

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.