In applied mathematics, the Biot–Tolstoy–Medwin (BTM) diffraction model describes edge diffraction. Unlike the uniform theory of diffraction (UTD), BTM does not make the high frequency assumption (in which edge lengths and distances from source and receiver are much larger than the wavelength). BTM sees use in acoustic simulations.[1]

Impulse response

The impulse response according to BTM is given as follows:[2]

The general expression for sound pressure is given by the convolution integral

where represents the source signal, and represents the impulse response at the receiver position. The BTM gives the latter in terms of

  • the source position in cylindrical coordinates where the -axis is considered to lie on the edge and is measured from one of the faces of the wedge.
  • the receiver position
  • the (outer) wedge angle and from this the wedge index
  • the speed of sound

as an integral over edge positions

where the summation is over the four possible choices of the two signs, and are the distances from the point to the source and receiver respectively, and is the Dirac delta function.

where

See also

Notes

  1. Calamia 2007, p. 182.
  2. Calamia 2007, p. 183.

References

  • Calamia, Paul T. and Svensson, U. Peter, "Fast time-domain edge-diffraction calculations for interactive acoustic simulations," EURASIP Journal on Advances in Signal Processing, Volume 2007, Article ID 63560.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.