This article contains a list of 3D printers.[1]

Metrics

Some important 3D printer metrics include:

  • Print technology: 3D printing processes encompasses a variety of methods which each have their own unique challenges.
  • Length of production run and support: 3D printers often require adjustments and parts replacement. A long production run often means that spare parts are also available.
  • Maximum build volume: Defines how large parts that are possible to print on a given printer. Often measured in millimeters, but sometimes in inches or centimeters instead.
  • Minimum layer resolution: Defines the resolution of the print (usually the vertical resolution). Often measured in micrometers (µm). The actual resolution of a printer can usually be adjusted within an interval.
  • Print speed: Defines how fast the printer is, and is usually measured in millimeters per second (mm/s). The actual speed of a printer can usually be adjusted within an interval.
  • Kit or assembled: Printers are usually sold either pre-assembled, partially assembled or as complete kits. Kits are usually less expensive, but also usually require more fitting and calibration.
  • Open source: Some printer designs are released into the open source domain, which can include for instance hardware specifications, CAD files, board schematics and firmware files. Open source printer designs are often popular in online do it yourself-communities.
  • Noise level: Measured in decibels (dB), and can vary greatly in home-printers from 15 dB to 75 dB.[2] Some main sources of noise in filament printers are fans, motors and bearings, while in resin printers the fans usually are responsible for most of the noise.[2] Some methods for dampening the noise from a printer may be to install vibration isolation, use larger diameter fans, perform maintenance and lubrication, or using a soundproofing enclosure.[2]

Commercial printers

Name Produced years Print technology Max build volume (mm) Max build volume (in) Min layer resolution (µm) Print speed (mm/s) Kit or assembled
Airwolf 3D Axiom[3] 2015[4] FFF 318 mm × 203 mm × 254 mm 12.5 in × 8.0 in × 10.0 in 40 µm 250 mm/s
Airwolf 3D HD2x 2014 FFF 279 mm × 203 mm × 305 mm 11.0 in × 8.0 in × 12.0 in 60 µm 150 mm/s
Anet A8 DIY Kit FFF 221 mm × 221 mm × 239 mm 8.7 in × 8.7 in × 9.4 in 100 mm/s Kit
Anycubic Vyper 2021 FFF 245 mm × 245 mm × 260 mm 9.6 in × 9.6 in × 10.2 in 180 mm/s Kit
Autodesk Ember[5] 2014[6] SLA 64 mm × 40 mm × 134 mm 2.5 in × 1.6 in × 5.3 in 50 µm 0.005 mm/s (18 mm/h) at 25 µm layers
be3D DeeGreen Ember[7] FFF 150 mm × 150 mm × 150 mm 5.9 in × 5.9 in × 5.9 in 90 mm/s
be3D DeeRed Ember[8] FFF 400 mm × 600 mm × 800 mm 16 in × 24 in × 31 in 100 mm/s
The Buccaneer 3D printer[9][10][11] 2013 FFF 145 mm × 125 mm × 155 mm 5.7 in × 4.9 in × 6.1 in 85 µm 100 mm/s Assembled
3D Systems Cube[12] FFF 152 mm × 153 mm × 152 mm 6.0 in × 6.0 in × 6.0 in 70 µm
3D Systems Cube Pro FFF 285 mm × 230 mm × 270 mm 11.2 in × 9.1 in × 10.6 in 70 µm
3D Systems ProJet 1200[13] SLA 43 mm × 27 mm × 150 mm 1.7 in × 1.1 in × 5.9 in 56 µm 0.0038 mm/s Assembled
3D Systems ChefJet Pro[14] 203 mm × 203 mm × 203 mm 8.0 in × 8.0 in × 8.0 in 0.014 mm/s (~2 in/h or ~100 candies/hr)
CandyFab 4000 610 mm × 340 mm × 230 mm 24.0 in × 13.4 in × 9.1 in[15] 1270 µm (20 DPI)[16]
CandyFab 5000 216 mm × 279 mm × 432 mm 8.5 in × 11.0 in × 17.0 in
CandyFab 6000 216 mm × 279 mm × 178 mm 8.5 in × 11.0 in × 7.0 in
Cellink BIO X[17] 360 mm × 450 mm × 500 mm 14 in × 18 in × 20 in 1 µm 40 mm/s
Creality CR-10 FFF 300 mm × 300 mm × 400 mm 12 in × 12 in × 16 in 100 µm
envisionTEC Micro Plus Hi-Res[18] 45 mm × 25 mm × 100 mm 1.77 in × 0.98 in × 3.94 in 30 µm
envisionTEC Perfactory Apollo SLA 100 mm × 75 mm × 100 mm 3.9 in × 3.0 in × 3.9 in 70 µm
Formlabs Form 1 SLA
Formlabs Form 1+[19] SLA 125 mm × 125 mm × 125 mm 4.9 in × 4.9 in × 4.9 in
Fusion3 F306 - Single Extruder 2014-2016 FFF 306 mm × 306 mm × 306 mm 12.0 in × 12.0 in × 12.0 in 250 mm/s
Fusion3 F306 - Dual Extruder 2014-2016 FFF 125 mm × 125 mm × 125 mm 4.9 in × 4.9 in × 4.9 in 250 mm/s
Fusion3 F410 2018-2022 FFF 355 mm × 355 mm × 318 mm 14.0 in × 14.0 in × 12.5 in 20 µm 250 mm/s Assembled
Fusion3 EDGE 2022-present FFF 368 mm × 368 mm × 343 mm 14.5 in × 14.5 in × 13.5 in 20 µm 250 mm/s Assembled
Hyrel 3D Engine
Hyrel 3D System 30
LulzBot TAZ FFF 298 mm × 275 mm × 250 mm 11.7 in × 10.8 in × 9.8 in 50 µm 200 mm/s
Makerbot Cupcake CNC FFF 100 mm × 100 mm × 130 mm 3.9 in × 3.9 in × 5.1 in
Makerbot Replicator FFF 225 mm × 145 mm × 150 mm 8.9 in × 5.7 in × 5.9 in
Makerbot Replicator 2 Desktop 3D Printer FFF 285 mm × 153 mm × 155 mm 11.2 in × 6.0 in × 6.1 in 100 µm
Makerbot Replicator+ Desktop 3D Printer FFF 295 mm × 195 mm × 165 mm 11.6 in × 7.7 in × 6.5 in 100 µm
Makerbot Replicator 2X Experimental 3D Printer FFF
Makerbot Replicator Desktop 3D Printer FFF 252 mm × 199 mm × 150 mm 9.9 in × 7.8 in × 5.9 in
Makerbot Replicator Mini Compact 3D Printer FFF 100 mm × 100 mm × 125 mm 3.9 in × 3.9 in × 4.9 in 200 µm
Makerbot Replicator Mini+ Compact 3D Printer FFF 110 mm × 126 mm × 126 mm 4.3 in × 5.0 in × 5.0 in 100 µm
Makerbot Replicator Z18 3D Printer FFF
Makerbot Thing-O-Matic FFF 100 mm × 100 mm × 100 mm 3.9 in × 3.9 in × 3.9 in
Photocentric LC Magna 2019 FFF 510 mm × 280 mm × 350 mm 20 in × 11 in × 14 in 20 µm 250 mm/s
Phrozen Mighty 8K 3D Printer 2022 LCD 218mm  x 123mm  x 235mm 28 µm 0.02/s Assembled
Phrozen Mini 8K 3D Printer 2021 LCD 165mm x 72mm x 180 mm 22 µm 0.022/s Assembled
Phrozen Mega 8K 3D Printer 2021 LCD 330mm x 185mm x 400 mm 43 µm 0.02/s Assembled
Printrbot Go Large 2014 FFF
Printrbot Plus[20] FFF 250 mm × 250 mm × 265 mm 9.8 in × 9.8 in × 10.4 in 50 µm 80 mm/s
Printrbot Simple 2014 FFF 150 mm × 150 mm × 150 mm 5.9 in × 5.9 in × 5.9 in 50 µm 80 mm/s
Printrbot Simple Metal 2014 FFF 150 mm × 150 mm × 150 mm 5.9 in × 5.9 in × 5.9 in 50 µm 80 mm/s
Printrbot Play FFF 100 mm × 105 mm × 130 mm 3.9 in × 4.1 in × 5.1 in 80 mm/s
Raise3D E2[21] FFF 295 mm–330 mm × 240 mm × 240 mm 11.6 in–13.0 in × 9.4 in × 9.4 in 30–150 mm/s Assembled
Raise3D E2CF[22] FFF 295 mm–330 mm × 240 mm × 240 mm 11.6 in–13.0 in × 9.4 in × 9.4 in 30–150 mm/s Assembled
Raise3D Pro2[23] FFF 280 mm–305 mm × 305 mm × 300 mm 11.0 in–12.0 in × 12.0 in × 11.8 in 30–150 mm/s Assembled
Raise3D Pro2 Plus[23] FFF 280 mm–305 mm × 305 mm × 605 mm 11.0 in–12.0 in × 12.0 in × 23.8 in 30–150 mm/s Assembled
Raise3D Pro3[24] FFF 255 mm–300 mm × 300 mm × 300 mm 10.0 in–11.8 in × 11.8 in × 11.8 in 30–150 mm/s Assembled
Raise3D Pro3 Plus[24] FFF 255 mm–300 mm × 300 mm × 605 mm 10.0 in–11.8 in × 11.8 in × 23.8 in 30–150 mm/s Assembled
Robo 3D R1 +Plus[25] FFF 254 mm × 229 mm × 203 mm 10.0 in × 9.0 in × 8.0 in 100 µm
Sindoh 3DWOX DP200/201 2016 (Discontinued) FFF 200 mm × 200 mm × 185 mm 7.9 in × 7.9 in × 7.3 in 50 µm 200 mm/s Assembled (Plug n Play)
Sindoh 3DWOX 1 2019 FFF 200 mm × 200 mm × 185 mm 7.9 in × 7.9 in × 7.3 in 50 µm 200 mm/s Assembled (Plug n Play)
Sindoh 3DWOX 1X 2019 FFF 228 mm × 200 mm × 300 mm 9.0 in × 7.9 in × 11.8 in 50 µm 200 mm/s Assembled (Plug n Play)
Sindoh 3DWOX 2X 2018 FFF 228 mm × 200 mm × 300 mm 9.0 in × 7.9 in × 11.8 in 50 µm 200 mm/s Assembled (Plug n Play)
Sindoh 3DWOX 7X 2019 FFF 380 mm × 390 mm × 450 mm 15 in × 15 in × 18 in 50 µm 200 mm/s Assembled (Customizable)
Sindoh 3DWOX 30X 2020 FFF 740 mm × 490 mm × 150 mm 29.1 in × 19.3 in × 5.9 in 50 µm 300 mm/s Assembled (Customizable)
Sindoh A1+ 2019 SLA 200 mm × 200 mm × 180 mm 7.9 in × 7.9 in × 7.1 in 25 µm Assembled (Customizable)
Solidscape MAX²[26] 152 mm × 152 mm × 102 mm 6.0 in × 6.0 in × 4.0 in
Solidscape Pro 152 mm × 152 mm × 102 mm 6.0 in × 6.0 in × 4.0 in
Solidscape Studio 152 mm × 152 mm × 51 mm 6.0 in × 6.0 in × 2.0 in
Solidscape Lab 152 mm × 152 mm × 51 mm 6.0 in × 6.0 in × 2.0 in
Stratasys Fortus 250mc[27] 254 mm × 254 mm × 305 mm 10.0 in × 10.0 in × 12.0 in
Stratasys Fortus 360mc FFF
Stratasys Fortus 400mc[28] FFF 406 mm × 355 mm × 406 mm 16.0 in × 14.0 in × 16.0 in 127 µm
Stratasys Fortus 900mc FFF 914 mm × 610 mm × 914 mm 36.0 in × 24.0 in × 36.0 in
Stratasys FrameWorx WDM
Stratasys Mojo FFF 127 mm × 127 mm × 127 mm 5.0 in × 5.0 in × 5.0 in
Stratasys Objet24 234 mm × 192 mm × 149 mm 9.2 in × 7.6 in × 5.9 in
Stratasys Objet30 Pro 294 mm × 192 mm × 149 mm 11.6 in × 7.6 in × 5.9 in
Stratasys Objet Eden260/260V
Stratasys Objet Eden350/350V
Stratasys Objet Eden500/500V
Stratasys Objet260 Connex 1 255 mm × 252 mm × 200 mm 10.0 in × 9.9 in × 7.9 in
Stratasys Objet30 OrthoDesk 300 mm × 200 mm × 100 mm 11.8 in × 7.9 in × 3.9 in
Stratasys Objet Eden260VS Dental Advantage 260 mm × 260 mm × 200 mm 10.2 in × 10.2 in × 7.9 in
Stratasys Objet Eden260V for Dental
Stratasys Objet Eden3500V for Dental
Stratasys Objet Eden500V for Dental
Stratasys Objet350 Connex1 340 mm × 340 mm × 200 mm 13.4 in × 13.4 in × 7.9 in
Stratasys Objet500 Connex1 490 mm × 390 mm × 200 mm 19.3 in × 15.4 in × 7.9 in
Stratasys Objet500 Connex3 490 mm × 390 mm × 200 mm 19.3 in × 15.4 in × 7.9 in
Stratasys Objet1000 Plus 1,000 mm × 800 mm × 500 mm 39 in × 31 in × 20 in
Stratasys uPrint SE Plus 203 mm × 203 mm × 152 mm 8.0 in × 8.0 in × 6.0 in
Stratasys uPrint SE 203 mm × 203 mm × 152 mm 8.0 in × 8.0 in × 6.0 in
Ultimaker FFF 210 mm × 210 mm × 205 mm 8.3 in × 8.3 in × 8.1 in Assembled
Ultimaker 2 FFF 230 mm × 225 mm × 205 mm 9.1 in × 8.9 in × 8.1 in Assembled
Voxeljet VX 200[29] 300 mm × 200 mm × 250 mm 11.8 in × 7.9 in × 9.8 in 300 DPI 0.0033 mm/s (12 mm/h)
Zortrax M200[30] FFF 200 mm × 200 mm × 180 mm 7.9 in × 7.9 in × 7.1 in 90 µm
Zortrax Inventure[31] FFF 140 mm × 140 mm × 140 mm 5.5 in × 5.5 in × 5.5 in 90 µm

See also

References

  1. ↑ "Top 10 Cheap and Budget 3D Printers Under $500/$1000 [DATE]". 8 August 2016.
  2. 1 2 3 How Loud Are 3D Printers and Making Them Quiet.
  3. ↑ "3D Printer Buying Guide - Airwolf 3D". Retrieved 4 July 2017.
  4. ↑ Airwolf 3D Releases AXIOM & AXIOMe 3D Printers | The Voice of 3D Printing
  5. ↑ "How Ember Works | Autodesk - Ember". Archived from the original on 2016-04-28. Retrieved 2016-01-13.
  6. ↑ Autodesk Drops Ember - Fabbaloo 3D Printing News
  7. ↑ https://www.ysoft.com/en/be3d/printers/deegreen%5B%5D
  8. ↑ https://www.ysoft.com/en/be3d/printers/deered%5B%5D
  9. ↑ "Tech Specs - Pirate3D". pirate3d.com. Archived from the original on 21 June 2017. Retrieved 4 July 2017.
  10. ↑ 3ders.org - Pirate3D unveiled tech specs of buccaneer 3D printer, backers disappointed | 3D Printer News & 3D Printing News
  11. ↑ Pirate3D Finally Lets the Beleaguered Buccaneer 3D Printer Sink - 3DPrint.com
  12. ↑ "3D Printers - Compare - 3D Systems". www.3dsystems.com. 16 January 2017. Retrieved 4 July 2017.
  13. ↑ 3ders.org - 3D Systems announces new ProJet 1200, ProX 950 and ProX 500
  14. ↑ "Culinary 3D Printing - 3D Systems". 26 January 2017. Retrieved 4 July 2017.
  15. ↑ "CandyFab - A DIY 3D Sugar Printer". candyfab.org. Retrieved 4 July 2017.
  16. ↑ "CandyFab - A DIY 3D Sugar Printer". www.candyfab.org. Archived from the original on 1 September 2014. Retrieved 4 July 2017.
  17. ↑ "3D Bioprinting". ThermoFisher Scientific. Retrieved 29 March 2019.
  18. ↑ "3D Printer Overview - 3D Printer Families - EnvisionTEC". EnvisionTEC. Archived from the original on 15 February 2017. Retrieved 4 July 2017.
  19. ↑ "Desktop SLA 3D Printing Technical Specifications – Formlabs". formlabs.com. Retrieved 4 July 2017.
  20. ↑ "Compare Printers | Printrbot". Archived from the original on 2016-01-16. Retrieved 2016-01-13.
  21. ↑ "IDEX 3D Printer - E2 | $3,499 | Raise3D".
  22. ↑ "IDEX 3D Printer for Carbon Fiber 3D Printing E2CF at $4,499".
  23. 1 2 "Dual Extruder 3D Printer | Pro2 Series Starting at $3,999".
  24. 1 2 "Professional Dual Extruder 3D Printer for Everyone".
  25. ↑ "R1 +Plus 3D Printer". store.robo3d.com. Archived from the original on 4 July 2017. Retrieved 4 July 2017.
  26. ↑ "3D Printers - Solidscape". Archived from the original on 30 April 2017. Retrieved 4 July 2017.
  27. ↑ "3D Printers for Professional Applications - Stratasys". www.stratasys.com. Archived from the original on 4 July 2017. Retrieved 4 July 2017.
  28. ↑ "Fortus 400mc Specifications". prototypingsolutions.com. Retrieved 14 November 2018.
  29. ↑ "Industrial 3D printer - voxeljet solutions". Retrieved 4 July 2017.
  30. ↑ "Zortrax M200 3D Printer - Valued by THOUSANDS of users". Retrieved 4 July 2017.
  31. ↑ "Zortrax Inventure 3D Printer - Smart PROFESSIONAL". Retrieved 4 July 2017.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.