The Funival to the summit of Bellevarde
Simplified working of the Funival
Schematic of the Funival
0,000
La Daille
(1,797 m)
Bridge
(580 m)
0,580
Tunnel
(1,720 m)
Passing loop
2,300
Bellevarde
(2,705 m)

The Funival is a 1,200 mm (3 ft 11+14 in) gauge funicular railway in Val-d'Isère, France

The Funival starts above ground in La Daille and after a few hundred meters it enters a tunnel ending at the mountain station on top of the Bellevarde.
The Funival uses two trains, connected by cables, on a single track. Halfway, a short section of dual track (passing loop) allows the trains to pass each other.

Description

A single track starts in La Daille from where the train runs up an elevated track for 580 m (1,903 ft). The remaining 1,720 m (5,643 ft). runs through a drilled tunnel. Halfway a section of double track allows the climbing train to pass the downward train. A cable runs from the front of the lower train, via a construction of electric powered pulleys in the mountain station to the back of the descending train. The mass of the descending train helps pull the climbing train and electric motors provide the power to overcome the weight difference between the climbing and descending trains plus any friction.

During most runs the climbing train will be far heavier than the descending train as the main function of the Funival is to take skiers to the top of the mountain. If the descending train is heavier than the climbing (when more passengers travel down than up) the electric motors can work as brakes. Each train is also provided with mechanical brakes to act as emergency brakes if the main cable should break. Although the Funival runs summer and winter it was primarily built to bring skiers to the top of the mountain.

Technical details

Funiculaire Funival[1][2]
namevalue
Altitude base station1,797 m (5,896 ft)
Altitude mountain station2,689 m (8,822 ft)
Climb892 m (2,927 ft)
track length2,300 m (7,546 ft).
length viaduct580 m (1,903 ft)
length tunnel1,720 m (5,643 ft)
Maximum gradient53%
Location enginesmountain station
capacity train220 persons
capacity per hour2425 persons/hour.
speed12 metres per second (39.37 ft/s)
Inventor of FuniculairesDennis Creissels
ArchitectMarc Albert
ProducerMontaval
EngineeringBOTTO
Technical installationWaagner-Birò et Montaval
Total costs in 198760 Million French franc (≈9,13 million)
civil engineering38 M FF (≈€ 5,79 million)
technical installation22 M FF (≈€ 3,35 million)
Construction year1987

See also

References

  1. "Funiculaire Funival". Remontees Mecaniques. Retrieved 25 December 2012.
  2. "Funival (Val d'Isere)". Lift World database. Retrieved 25 December 2012.

45°27′33″N 6°57′51″E / 45.45917°N 6.96417°E / 45.45917; 6.96417

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.