Hangzhou–Huangshan high-speed railway 杭黄客运专线
A CR400BF train at Sanyang railway station
Overview
Other name(s)	Hanghuang HSR (simplified Chinese: 杭黄高铁; traditional Chinese: 杭黃高鐵; pinyin: hánghuáng gāotiě)
Status	operational
Locale	Hangzhou, Zhejiang and Huangshan, Anhui
Stations	2
Service
Type	High-speed rail
Rolling stock	CR400BF
History
Opened	25 December 2018
Technical
Line length	265 km (164.66 mi)
Number of tracks	2
Track gauge	1,435 mm (4 ft 8+1⁄2 in)
Electrification	Overhead lines (AC 25 kV)
Operating speed	250 km/h
Route map km elev Huhang HSR from Shanghai Hongqiao Ninghang HSR from Nanjing South Hangzhou East Hangzhou South (start of line) Hangyong HSR to Ningbo Hangzhang-Hangzhou South passing loop Hukun HSR to Kunming South Fuyang Huhang HSR from Huzhou Tonglu Jinjian railway from Jinhua Jiande Hangqu railway to Jiangshan Qiandaohu Sanyang Hefu HSR from Hefei South Jixi North Shexian North Huangshan North Hefu HSR to Fuzhou

Hangzhou–Huangshan high-speed railway (Chinese: 杭黄客运专线; pinyin: Hánghuáng Kèyùn Zhuānxiàn) or Hanghuang HSR (simplified Chinese: 杭黄高铁; traditional Chinese: 杭黃高鐵; pinyin: Hánghuáng Gāotiě) is a dual-track, electrified, high-speed rail line between Hangzhou, Zhejiang, and Huangshan, Anhui. The line runs 265 km (165 mi) through northwestern Zhejiang and southern Anhui and accommodates trains traveling at speeds up to 250 km/h (160 mph).^[1][2] Travel time from Hangzhou to Huangshan was reduced to about one and one-half hours.^[1] The line is the first rail link between the two cities and brings counties in mountainous southern Anhui closer to the Yangtze River Delta region. Construction began on June 30, 2014, and the line opened on December 25, 2018.

Route

The high-speed rail line connects southern Anhui Province with Hangzhou, on the eastern seaboard, via northwestern Zhejiang province. Cities and counties along the route include Hangzhou, Xiaoshan, Fuyang, Tonglu, Jiande, Chun'an in Zhejiang, and Jixi, She County, and Huangshan in Anhui.^[2] At its eastern terminus, Hangzhou, the line is linked to the high-speed rail lines to Shanghai and Nanjing. At its western terminus, Huangshan, the line connects to the Hefei–Fuzhou high-speed railway. Scenic sites along route include Huangshan (Yellow Mountain), the ancient villages in southern Anhui, Qiandao Lake, and Hangzhou.

To scale map of the Hanghuang HSR

History

The Hanghuang high-speed rail project was initially approved by the State Development and Planning Commission in July 2010.^[3] Construction was to begin later in that year and was scheduled to be completed by as early as 2013.^[2] After two rounds of environmental assessments of surveys in 2010 and 2011, the project was revised.^[1] In August 2013, planners announced that the route would run 183.4 km (114.0 mi) in Zhejiang and 81.7 km (50.8 mi) in Anhui with 10 stations, including eight new stations.^[1] Two stations, Shexian South and Sanyang, were added to the original plan, which had Hangzhou East, Hangzhou South, Fuyang, Tonglu, Jiande, Chun'an, Jixi North, and Huangshan North.^[4] The Jiande-to-Jixi section of the line would use seamless steel rails laid on a concrete rail bed.^[1] The Hangzhou South-to-Jiande and Jixi-to-Huangshan sections would have rail laid on conventional gravel beds.^[1] The design speed of the railway was changed from an initial speed of 250 km/h (155 mph) with expansion capability for 350 km/h (220 mph) operation to 250 km/h (155 mph) without any expansion capability to higher speeds.^[1] Construction began on June 30, 2014,^[5] and the line was opened on December 25, 2018.^[6]

References