IC programming[1] is the process of transferring a computer program into an integrated computer circuit. Older types of IC including PROMs and EPROMs and some early programmable logic was typically programmed through parallel busses that used many of the device's pins and basically required inserting the device in a separate programmer.

Modern ICs are typically programmed in circuit though a serial protocol (sometimes JTAG sometimes something manufacturer specific). Some (particularly FPGAs) even load the data serially from a separate flash or prom chip on every startup.

Notes

  1. ↑ Depending on the context, just programming or the type of IC may also be used


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.