Johnston D1918 LMG
Type	Light machine gun
Place of origin	United States
Specifications
Cartridge	.30-06 Springfield
Action	gas-operated
Feed system	double drum magazine

The Johnston Model D1918 was a light machine gun.^[1] It is a rare and little-known weapon with scant information available on it. It is best known for its resemblance to the Lewis Gun, having a similar gas-operated action and a barrel surrounded by a cooling shroud.

The weapon was chambered for the .30-06 round, fed from double drum magazines.^{[note 1]}

The action was gas-operated, with the piston working in a cylinder beneath and integral with the barrel. The Johnston did not use the Lewis's prominent clock spring. Cocking of the piece was unusual, the entire pistol grip sliding forwards to engage the action, then returning backwards to cock it.^{[note 2]} This was first unlocked by a trigger-like mechanism in a cutout through the grip, behind the firing trigger.

The cooling shroud could be removed without tools by unscrewing the front retaining ring from the barrel by hand. The aluminium cooling fins inside were in two pieces and once the shroud was removed, came loose from the barrel. A cold barrel could be unscrewed for field exchange.^{[note 3]} An integral bipod was attached to the shroud.

Stripped to major groups

Variants

Variant without thermal jacket

A variant was produced without the heat shield jacket and with a bare, unfinned barrel. A muzzle counterweight maintained the normal balance position. A further wooden handgrip was provided ahead of the receiver, as the bare barrel would be too hot to hold, unlike the cooling shroud.

Notes

Wikimedia Commons has media related to Johnston Model D1918 machine gun.

References