History

GO Transit rail service began on May 23, 1967, on a single rail line along Lake Ontario's shoreline.^[5][9] GO Train service ran throughout the day from Oakville to Pickering with limited rush hour train service to Hamilton. This line, now divided as the Lakeshore East and Lakeshore West lines is the keystone corridor of GO Transit, and continued to be its only rail line for its first seven years of operation.^[5] GO's other five lines were opened between 1974 and 1982, significantly expanding the rail network from 86 to 332 kilometres long, and from 16 to 43 stations.

To that point, all of GO's rail services ran on tracks mostly owned by the two major freight railways of Canada: Canadian National (CN) and Canadian Pacific (CP).^[7] in 1988, a small but significant milestone in network growth occurred when it expanded its Lakeshore East line on new track it built by itself. But following that, the network experienced two long distance extensions to southern Barrie and Guelph in 1990, only to have those extensions reversed three years later. GO did extend its Lakeshore East line again in 1995 from Whitby to Oshawa, finishing that line as it exists today.

The reach of GO's network remained relatively unchanged between 1996 and 2005. However, seven new infill stations were opened along the Bradford and Stouffville lines. This coincided with GO's initial purchases of the rail corridors it operated on, taking ownership of the entire Stouffville line past Scarborough station, and most of the Barrie line north of the Toronto border. In addition, GO took control of the critical Union Station Rail Corridor, which all GO trains on all lines used. By the end of 2005, GO owned over a third of its rail network.

From 2007 to 2017, GO's network saw six extensions, requiring the Bradford line to be renamed as the "Barrie line", and the Georgetown line to "Kitchener line." These long distance extensions, along with the other extensions on the Lakeshore West, Richmond Hill and Stouffville lines, expanded GO's network length by 29%. Six critical corridor purchases were also made, tripling its length of owned corridors and bringing its ownership percentage to over 80%. Finally, 10 new stations were added, one of which coincided with the opening of the Toronto-York Spadina Subway Extension, creating a new interchange between GO and the TTC subway.

Future extensions

• Lakeshore East to Bowmanville

Future lines

Bolton line

Bolton Line
Canadian Pacific to Mactier Bolton Kleinburg Vaughan Intermodal Terminal Vaughan Humber River Highway 407 Woodbridge Canadian National to Halwest Canadian Pacific to West Toronto Diamond Highway 400 MacMillan Yard Barrie line Downsview Park Highway 401 Caledonia Davenport Diamond Line 2 Bloor–Danforth Kitchener line Lakeshore West line Union Union (TTC)

GO Transit rail service to Bolton was first proposed by the Ontario government under the MoveOntario 2020 plan in June 2007.^[16] It was subsequently carried over to The Big Move, where it was placed on the 15-year plan.^[17] In November 2010, Metrolinx completed a feasibility study that focused on utilization of Canadian Pacific Railway's Mactier subdivision, which runs from the West Toronto Diamond in Toronto northward to Bolton. Four different service alternatives were assessed to determine the best method to carry passengers into Toronto from the Mactier subdivision, and the preferred option was to direct trains east-west along CN's Halton subdivision, and north-south again along GO Transit's existing Barrie line. This would provide four new stations in the communities of Woodbridge and Kleinburg in the City of Vaughan, and Bolton in the Town of Caledon, and also use the existing Downsview Park station before terminating at Union.^[16]

The feasibility study estimated that minimum infrastructure costs were $160 million for peak direction rush-hour service, and resulting ridership was forecasted to be 2,391, 2,884, and 4,388 in 2015, 2021, and 2031, respectively, in the morning peak period. If service was increased for two-way all-day service, total costs increased to $210 million, and ridership was forecasted to be 6,074, 7,324, and 11,146 in 2015, 2021, and 2031, respectively. Metrolinx determined that the projected ridership did not justify the costs, and downgraded the Bolton line from the 15- to the 25-year plan on February 14, 2013, when amendments were made to The Big Move.^[18][19]

Midtown corridor and Peterborough line

Midtown Corridor
Milton line Kitchener line Barrie line Dupont Summerhill North Toronto Yellow Creek Mud Creek Don Branch to Union Station Leaside West Don River Sunnybrook Park Science Centre Relief Line DVP Richmond Hill line East Don River Massey Creek Highway 401 West Highland Creek Agincourt Brimley East Highland Creek Seaton line Havelock/Peterborough line CPR Toronto Yard East Highland Creek Steeles Rouge River Canadian National Railway Highway 407 Little Rouge Creek Locust Hill West Duffins Creek Seaton Claremont Myrtle Pontypool Harper freight spur Peterborough

The Midtown corridor refers to three new GO Transit services in The Big Move. The first is a Crosstown line from Dundas Street to the former CP North Toronto and Leaside stations in Toronto. The second and third segments would extend east from North Toronto and/or Union Station: the Seaton line to Seaton, and the Locust Hill line to Locust Hill.^[20]

GO Transit has contemplated a Midtown corridor since the 1980s as a contingency plan once capacity at Union Station became constrained, making North Toronto an alternate station for Downtown Toronto. The major barrier to these plans, however, is the fact that the Midtown corridor is composed of existing rail lines owned and actively used by the CPKC as its main freight line between Ottawa, Montreal, London and Windsor. CPKC has been reluctant to provide capacity to GO Transit on its tracks, and the Milton line (which runs along CPKC tracks to the west) only came after considerable negotiations, the 1979 Mississauga train derailment, and an investment of hundreds of millions of dollars.^[21][22]

All three lines in the corridor were listed under the 15-year plan of The Big Move upon its publication in 2008.^[20] However, the Havelock line was moved to the 25-year plan on February 14, 2013, because of "very modest ridership potential and significant infrastructure and operational challenges related to the Agincourt rail yards."^[23]

Via Rail provided train service to Peterborough until 1990, when service was cancelled. The potential to provide commuter rail service to Peterborough was noted by GO Transit in its 2020 strategic plan, and was also included in The Big Move.^[20][24] Metrolinx completed a study for bringing commuter rail service to Peterborough in February 2010. Different routes were explored, all of which use CPKC's existing Havelock subdivision between Peterborough and Toronto. Once reaching Toronto, three different routes were explored through the east end, to deal with the same "significant infrastructure and operational challenges related to the Agincourt rail yards" that complicate GO's Havelock line. The study also kept the option open of using either Union Station or North Toronto station as the terminus of the line. Capital costs to upgrading the Havelock subdivision were estimated to be between C$329 and 384 million.^[24][23] GO introduced bus service between Peterborough and Oshawa on September 5, 2009.^[24]

Onboard procedures

All GO trains have a total of three crew members. The conductor and engineer are located in the locomotive or the cab car to operate the vehicle. Another guard-like staff member, the Customer Service Ambassador (CSA), is located in the accessibility coach, which is the fifth car from the locomotive. The CSA is responsible for opening and closing the train doors, making announcements over the PA system, and acts as the first responder in case of an emergency on board.^[26]

The CSA announces the next station after the train departs a station, and an automated voice will repeat the announcement when the train arrives at its next station.^[26] Automated public service announcements are made in both English and French.

When a train arrives at a station, the CSA puts a small accessibility bridge across the gap between the platform and the doorway. This is to allow passengers with mobility devices such as wheelchairs, walkers, or strollers to board and exit the train.^[26] Each car has a number of accessibility seats provided. If the CSA sees a passenger with a physical disability and there are no accessibility seats available, they could ask that a passenger sitting in one of those seats to move to another area in the train to allow the passenger with a disability to sit in an accessibility seat.^[26]

Before closing the doors, the CSA will make an announcement that the doors are closing and will remind passengers to stand clear of the doorways. All cars have a speaker above the doors, which plays a door closing chime in the form of a descending major triad.^[27] The chimes are an accessibility feature intended to warn the visually-impaired that the doors are closing.^[28]

A CSA points at the doors at Rouge Hill Station after closing them for safety. This "shisa kanko" method was adopted by GO Transit in March 2021.

In March 2021, Metrolinx adopted the Japanese shisa kanko (pointing and calling) method. Upon entering a station, but before opening the doors, the CSA is required to point towards both ends of the train and announce that the platform is clear as a way to confirm that the train is stopped properly. After the CSA closes the doors, the same process is repeated to confirm that nobody is caught in the doors. According to Metrolinx, incorporating the pointing and calling procedure within GO Transit's daily operations is an important way to enhance safety, "especially as the transit agency gets ready to launch the largest expansion of GO service in it’s [sic] history".^[29]

Extreme weather

In winter conditions, trains are stored near Union Station to so that afternoon and evening trains can travel through less snow. Trains are kept at specific temperatures during storage to speed up engine startup on cold days and to eliminate frozen train doors. Fans are used to blow hot air onto track switches to keep them from freezing in extreme cold. Track snow removal is conducted using high-pressure blower snow removal equipment.^[30]

In the event of exceptionally severe winter conditions, GO trains run on different schedules. Express trains will stop at all stations. The cancellation of train trips may occur,^[30] as well as replacing trains with buses.

GO Transit inspects train air conditioning more frequently during summer, as A/C systems have to work harder on hot days.^[31]

In extremely hot weather, train tracks can expand and buckle under the heat. These "sun kinks" can occur when temperatures are above 30 degrees Celsius for at least 48 hours. For safety reasons, sun kinks require trains to be operated at reduced speeds. Sun kinks are usually fixed during overnight or in the early morning.^[31]

Holiday service

On holidays that fall on weekdays, service changes will occur. The following table shows the service type by holiday.^[32]

Service expansion

According to Metrolinx, GO Transit rail service expansion is currently being undertaken and is expected to be complete by 2025.^[33] By 2025, GO train service will run from 5 a.m. to 2 a.m. on each line. The following table shows the expected service frequency per line when expansion is complete.

Start times and service frequency on weekends may vary.

Locomotives

The following table shows the GO Transit locomotive fleet by vehicle type.^[41]

Passenger cars

The following tables shows the GO Transit’s 979 Bilevel passenger cars.

Maintenance facilities

The Willowbrook Rail Maintenance Facility is GO's original rail maintenance facility, covering 18,600 m² (200,000 sq ft). It is along the Lakeshore West line, directly west of Mimico GO Station, and directly north of Via Rail's Toronto Maintenance Centre. The yard includes four progressive maintenance bays, a locomotive shop, a coach repair shop and storage tracks for 21 trains.^[3]

In 2018,^[46] GO Transit opened the Whitby Rail Maintenance Facility, along the Lakeshore East line. This second rail maintenance facility is 46,000 m² (500,000 sq ft), more than twice the size of Willowbrook. It includes two progressive maintenance bays, repair shops for 11 coaches and 12 locomotives, two washing stations and storage tracks for 13 trains.^[47] The facility was constructed to handle service expansions, which include the GO Transit Regional Express Rail program.^[48]

Train layovers

Metrolinx is planning a new storage facility along the Richmond Hill GO Line south of Oriole GO Station near York Mills Road.^[57] Metrolinx is also planning a new layover facility to hold five trains parallel to the Lakeshore East line just east of Midland Avenue.^[58]

Overhaul

From 2004 to 2011 Ontario Northland Railway overhauled 121 Bi-Level cars at their North Bay Yard.

General references

• Garcia, Daniel; Bow, James; Marshall, Sean; Drost, Peter (November 10, 2006). "Regional Transit Routes – Transit Toronto". Retrieved 15 June 2011.
  • Part of collection: Lakeshore, Georgetown, Richmond Hill, Milton, Bradford, Stouffville corridors, and GO ALRT
  • Daniel Garcia and James Bow. "GO Transit's Future Midtown Line". Transit Toronto. Retrieved 30 December 2015.
• "The Big Move" (PDF). Metrolinx. 2008. Archived from the original (PDF) on 3 March 2016. Retrieved 22 April 2015.
  • "Approved Changes to The Big Move" (PDF). Metrolinx. 14 February 2013. Retrieved 8 December 2015.

Bibliography

• Sergeant, Wilfred (2004). "Building GO-Transit: The Rail Commuter Initiative of The Government of Ontario & Canadian National Railways, People in the project 1965–1969". Starkville, MS: HTA PRESS. Archived from the original on July 2, 2016.