Midwest Roadside Safety Facility
Agency overview
Formed1974 (1974)
TypeAgency of higher education
Automobile crash test facility
Headquarters2200 Vine Street, Lincoln, Nebraska, United States
Employees51 (2022)
Agency executive
  • Ronald Faller, Ph.D., Director
Parent agencyUniversity of Nebraska–Lincoln
Websitehttp://mwrsf.unl.edu

The Midwest Roadside Safety Facility (commonly referred to as Midwest and abbreviated as MwRSF) is a research organization in Lincoln, Nebraska that conducts automotive crash testing. MwRSF is operated by the University of Nebraska–Lincoln (NU) and researches highway design and safety with a particular emphasis on safety performance evaluations of roadside appurtenances. Since its establishment in 1974, the facility has evaluated existing barriers and frequently developed new design concepts and technologies for use on public roadways.

MwRSF engineers designed and tested the SAFER barrier, an energy-absorbing "soft wall" system installed at all high-speed oval race tracks used by NASCAR and IndyCar.

History

Roadside safety research at the University of Nebraska–Lincoln began in 1974, when Edward Post left the Texas A&M Transportation Institute (TTI) and joined the Civil Engineering department at NU.[1] In its early years, Post's research organization was made up of a handful of graduate students and was primarily funded by the Nebraska Department of Roads (now the Nebraska Department of Transportation (NDOT)). As more state agencies and the Federal Highway Administration began supporting the program, it was formally titled the Midwest Roadside Safety Facility and hired a number of full-time staff.[1] When Post died in 1991, MwRSF hired Dean Sicking, also from TTI, to lead the program. Sicking served as MwRSF's director until 2012, when he left NU to take a teaching position at the University of Alabama at Birmingham; longtime MwRSF engineer Ronald Faller was named program director upon Sicking's departure.

MwRSF has worked on hundreds of roadside safety projects since its inception, many of which are used on highways nationwide. These include the SKT, FLEAT, and BEAT energy-absorbing guardrail end terminals; many variations of W-beam and thrie-beam guardrails, including the complete design and development of the Midwest Guardrail System; and the SAFER barrier.[1][2] The facility receives funding from the National Cooperative Highway Research Program and frequently presents at the Transportation Research Board Annual Meeting.[3]

Though it is headquartered at the Prem S. Paul Research Center just east of NU's main campus, MwRSF uses an approximately quarter-mile stretch of runway at the Lincoln Airport to conduct its crash tests. In 2021, MwRSF tested an 80,000-lb tank truck at fifty miles per hour impacting a sixty-two inch tall constant-slope concrete barrier; because of the immense costs associated, this was the first test of its kind in over thirty years.[4] The barrier was believed to be a suitable replacement for the much larger and more costly ninety-inch barrier used as standard to divide highways and prevent large trucks from encroaching into oncoming lanes.[5]

Pooled Fund

The University of Nebraska–Lincoln and NDOT, along with the Kansas Department of Transportation and Missouri Department of Transportation, formed the Midwest States Regional Pooled Fund Program in 1991; the Iowa Department of Transportation and Minnesota Department of Transportation joined soon after.[6] The Pooled Fund was created as a way for states with similar geographic layouts to combine resources and optimize roadside safety research efforts. The program has since expanded to include twenty-one states from across the country.[6] In 2021, the Pooled Fund received $1.235 million in funding from its member departments of transportation and completed twelve projects, including compliance testing for the American Association of State Highway and Transportation Officials.[7]

SAFER barrier

SAFER barrier at Talladega Superspeedway

In 1998, MwRSF was contracted by NASCAR, the Indy Racing League (now IndyCar), and the Indianapolis Motor Speedway to develop an energy-absorbing, partially deformable "soft wall" to mitigate the forces involved with high-speed wall impacts.[8] MwRSF engineers tested nearly one hundred materials for optimal effectiveness, cost, and replaceability before settling on Owens Corning FOAMULAR as the primary energy-absorbing mechanism in the barrier.[9] The closed-cell, polystyrene foam was used to partially fill the thirty-inch gap between the existing concrete wall and the steel face of the barrier.[10] During the design and testing of the new barrier, a number of high-profile deaths in NASCAR involving wall impacts, including that of Dale Earnhardt, dramatically increased scrutiny of the United States' most popular racing organization and its efforts to protect drivers.

The system was officially named the Steel And Foam Energy Reduction Barrier (abbreviated to "SAFER" barrier); it was first installed at Indianapolis Motor Speedway in 2002. It was soon implemented in some capacity at every high-speed oval race track used by NASCAR and IndyCar, and there have been no subsequent driver fatalities in any of NASCAR's top-flight series (the Cup Series, Xfinity Series, and Craftsman Truck Series).[10] Many racing stars, notably Jeff Gordon, have praised the inertia-dampening performance of the SAFER barrier; Gordon suggested "SAFER barriers should be on every wall, every track."[11]

MwRSF engineers Ronald Faller, Jim Holloway, John Reid, John Rohde, and Dean Sicking were presented with the Louis H. Schwitzer Award for Engineering Innovation and Excellence at the 2002 Indianapolis 500 in recognition of their development of the SAFER barrier.[12]

References

  1. 1 2 3 "Midwest Roadside Safety Facility - History". University of Nebraska–Lincoln. Retrieved 19 October 2022.
  2. ↑ "Tech Brief - Midwest Guardrail System (MGS)" (PDF). North Dakota Department of Transportation. May 2019. Retrieved 19 October 2022.
  3. ↑ "Barrier-connecting prototype intended to increase work zone safety". Safety+Health. 5 August 2022. Retrieved 19 October 2022.
  4. ↑ Bria Battle (8 December 2021). "UNL researchers conduct rare crash test for new roadside barrier". 1011 Now KOLN/KGIN. Retrieved 19 October 2022.
  5. ↑ Libby Kamrowski (8 December 2021). "Midwest Roadside Safety Facility, UNL students, design and test new roadside barrier". 3 KMTV News Now. Retrieved 19 October 2022.
  6. 1 2 "Pooled Fund Program History". University of Nebraska–Lincoln. Retrieved 19 October 2022.
  7. ↑ Jennifer Schmidt (25 September 2018). "Roadside Safety Design:Now" (PDF). Retrieved 19 October 2022.
  8. ↑ "NASCAR SAFER Barrier". American Galvanizers Association. 2015. Retrieved 19 October 2022.
  9. ↑ Curt Calvin (18 May 2021). "OWENS CORNING FOAM HELPS SAFER BARRIER PROTECT DRIVERS". IndyCar. Retrieved 19 October 2022.
  10. 1 2 Al Pearce (28 February 2021). "How SAFER Barriers Came To Help NASCAR Drivers Survive 'The Big One'". Autoweek. Retrieved 19 October 2022.
  11. ↑ Al Pearce (31 May 2013). "Jeff Gordon says SAFER barriers should be on every wall, every track". Autoweek. Retrieved 19 October 2022.
  12. ↑ "Louis Schwitzer Award Winners". Indianapolis Motor Speedway. Retrieved 19 October 2022.

40°51′35″N 96°46′12″W / 40.8596°N 96.7701°W / 40.8596; -96.7701

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.