Part of a series on
Classical mechanics
${\displaystyle {\textbf {F}}={\frac {d}{dt}}(m{\textbf {v}})}$ Second law of motion
History Timeline Textbooks
Branches Applied Celestial Continuum Dynamics Kinematics Kinetics Statics Statistical mechanics
Fundamentals Acceleration Angular momentum Couple D'Alembert's principle Energy kinetic potential Force Frame of reference Inertial frame of reference Impulse Inertia / Moment of inertia Mass Mechanical power Mechanical work Moment Momentum Space Speed Time Torque Velocity Virtual work
Formulations Newton's laws of motion Analytical mechanics Lagrangian mechanics Hamiltonian mechanics Routhian mechanics Hamilton–Jacobi equation Appell's equation of motion Koopman–von Neumann mechanics
Core topics Damping Displacement Equations of motion Euler's laws of motion Fictitious force Friction Harmonic oscillator Inertial / Non-inertial reference frame Mechanics of planar particle motion Motion (linear) Newton's law of universal gravitation Newton's laws of motion Relative velocity Rigid body dynamics Euler's equations Simple harmonic motion Vibration
Rotation Circular motion Rotating reference frame Centripetal force Centrifugal force reactive Coriolis force Pendulum Tangential speed Rotational frequency Angular acceleration / displacement / frequency / velocity
Scientists Kepler Galileo Huygens Newton Horrocks Halley Maupertuis Daniel Bernoulli Johann Bernoulli Euler d'Alembert Clairaut Lagrange Laplace Hamilton Poisson Cauchy Routh Liouville Appell Gibbs Koopman von Neumann
Physics portal  Category

In classical mechanics, the Newton–Euler equations describe the combined translational and rotational dynamics of a rigid body.^{[1][2] [3][4][5]}

Traditionally the Newton–Euler equations is the grouping together of Euler's two laws of motion for a rigid body into a single equation with 6 components, using column vectors and matrices. These laws relate the motion of the center of gravity of a rigid body with the sum of forces and torques (or synonymously moments) acting on the rigid body.

Center of mass frame

With respect to a coordinate frame whose origin coincides with the body's center of mass for τ(torque) and an inertial frame of reference for F(force), they can be expressed in matrix form as:

${\displaystyle \left({\begin{matrix}{\mathbf {F} }\\{\boldsymbol {\tau }}\end{matrix}}\right)=\left({\begin{matrix}m{\mathbf {I} _{3}}&0\\0&{\mathbf {I} }_{\rm {cm}}\end{matrix}}\right)\left({\begin{matrix}\mathbf {a} _{\rm {cm}}\\{\boldsymbol {\alpha }}\end{matrix}}\right)+\left({\begin{matrix}0\\{\boldsymbol {\omega }}\times {\mathbf {I} }_{\rm {cm}}\,{\boldsymbol {\omega }}\end{matrix}}\right),}$

where

F = total force acting on the center of mass

m = mass of the body

I₃ = the 3×3 identity matrix

a_cm = acceleration of the center of mass

v_cm = velocity of the center of mass

τ = total torque acting about the center of mass

I_cm = moment of inertia about the center of mass

ω = angular velocity of the body

α = angular acceleration of the body

Any reference frame

With respect to a coordinate frame located at point P that is fixed in the body and not coincident with the center of mass, the equations assume the more complex form:

${\displaystyle \left({\begin{matrix}{\mathbf {F} }\\{\boldsymbol {\tau }}_{\rm {p}}\end{matrix}}\right)=\left({\begin{matrix}m{\mathbf {I} _{3}}&-m[{\mathbf {c} }]^{\times }\\m[{\mathbf {c} }]^{\times }&{\mathbf {I} }_{\rm {cm}}-m[{\mathbf {c} }]^{\times }[{\mathbf {c} }]^{\times }\end{matrix}}\right)\left({\begin{matrix}\mathbf {a} _{\rm {p}}\\{\boldsymbol {\alpha }}\end{matrix}}\right)+\left({\begin{matrix}m[{\boldsymbol {\omega }}]^{\times }[{\boldsymbol {\omega }}]^{\times }{\mathbf {c} }\\{[{\boldsymbol {\omega }}]}^{\times }({\mathbf {I} }_{\rm {cm}}-m[{\mathbf {c} }]^{\times }[{\mathbf {c} }]^{\times })\,{\boldsymbol {\omega }}\end{matrix}}\right),}$

where c is the location of the center of mass expressed in the body-fixed frame, and

${\displaystyle [\mathbf {c} ]^{\times }\equiv \left({\begin{matrix}0&-c_{z}&c_{y}\\c_{z}&0&-c_{x}\\-c_{y}&c_{x}&0\end{matrix}}\right)\qquad \qquad [\mathbf {\boldsymbol {\omega }} ]^{\times }\equiv \left({\begin{matrix}0&-\omega _{z}&\omega _{y}\\\omega _{z}&0&-\omega _{x}\\-\omega _{y}&\omega _{x}&0\end{matrix}}\right)}$

denote skew-symmetric cross product matrices.

The left hand side of the equation—which includes the sum of external forces, and the sum of external moments about P—describes a spatial wrench, see screw theory.

The inertial terms are contained in the spatial inertia matrix

${\displaystyle \left({\begin{matrix}m{\mathbf {I} _{3}}&-m[{\mathbf {c} }]^{\times }\\m[{\mathbf {c} }]^{\times }&{\mathbf {I} }_{\rm {cm}}-m[{\mathbf {c} }]^{\times }[{\mathbf {c} }]^{\times }\end{matrix}}\right),}$

while the fictitious forces are contained in the term:^[6]

${\displaystyle \left({\begin{matrix}m{[{\boldsymbol {\omega }}]}^{\times }{[{\boldsymbol {\omega }}]}^{\times }{\mathbf {c} }\\{[{\boldsymbol {\omega }}]}^{\times }({\mathbf {I} }_{\rm {cm}}-m[{\mathbf {c} }]^{\times }[{\mathbf {c} }]^{\times })\,{\boldsymbol {\omega }}\end{matrix}}\right).}$

When the center of mass is not coincident with the coordinate frame (that is, when c is nonzero), the translational and angular accelerations (a and α) are coupled, so that each is associated with force and torque components.

Applications

The Newton–Euler equations are used as the basis for more complicated "multi-body" formulations (screw theory) that describe the dynamics of systems of rigid bodies connected by joints and other constraints. Multi-body problems can be solved by a variety of numerical algorithms.^[2][6][7]

See also

• Euler's laws of motion for a rigid body.
• Euler angles
• Inverse dynamics
• Centrifugal force
• Principal axes
• Spatial acceleration
• Screw theory of rigid body motion.

References