Offset figure-eight bend | |
---|---|
Names | Offset figure-eight bend, flat figure-eight bend[1], abnormal figure-eight bend[2] |
The offset figure-eight bend is a poor knot that has been implicated in the deaths of several rock climbers.[1][3][4] The knot may capsize (invert) under load, as shown in the figure, and this can happen repeatedly.[5] Each inversion reduces the lengths of the tails. Once the tails are used up completely, the knot comes undone.
More secure knots for this purpose are the Flemish bend (the "figure eight bend"), (doubled) offset overhand bend, or double fisherman's knot.
See also
References
- 1 2 Moyer, Tom (1999-11-09). "Pull Tests of the "Euro Death-Knot"". Rope and Gear Testing. Retrieved 2018-07-10.
- ↑ "Rock Climbing Tech Tips: Joining Two Ropes". Chockstone.org. Retrieved 2018-07-10.
- ↑ "Rappel Knot Fails, Climber Falls to Death on the Goat Wall". Rock and Ice. Retrieved 2018-07-10.
- ↑ "Fall on Rock, Failure of Rappel-Knot Came Undone, No Hard Hat, West Virginia, Seneca Rocks". Accidents in North American Mountaineering. The American Alpine Club. 1995.
- ↑ Dahlberg, Robin. "Cross load test of common climbing knots". Vimeo. 0:08-0:35. Retrieved 2020-06-10.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.