GE Genesis
GE P42DC #150 on the Cardinal in 2006
Type and origin Power type Diesel–electric or dual-mode Builder GE Transportation Systems Model P40DC, P32AC-DM, P42DC Build date 1992–2001 Total produced 321 Number rebuilt 19
Specifications Configuration: ​  • AAR B-B  • UIC Bo′Bo′ Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Trucks Krupp-MaK high-speed bolsterless Wheel diameter 40 in (1,016 mm) Minimum curve 251 ft (77 m) radius/ 22.85° (single unit) 318 ft (97 m) radius/ 18.2° (coupled) Wheelbase 43 ft 2+1⁄2 in (13.17 m) (between truck centers) Length 69 ft 0 in (21.03 m) Width 10 ft 0 in (3.05 m) Height 14 ft 4 in (4.37 m) Axle load 72,000 lb (32,659 kg) Max Adhesive weight 100% Loco weight P40DC, P42DC: 268,240 lb (121,672 kilograms) P32AC-DM: 274,400 lb (124,466 kilograms) Fuel type Diesel Fuel capacity 2,200 US gal (8,300 L; 1,800 imp gal) (DC) 1,800 US gal (6,800 L; 1,500 imp gal) (AC) Lubricant cap. 410 US gal (1,600 L; 340 imp gal) (DC) 365 US gal (1,380 L; 304 imp gal) (AC) Coolant cap. 380 US gal (1,400 L; 320 imp gal) (DC) 210 US gal (790 L; 170 imp gal) (AC) Sandbox cap. 26 cubic feet (740 L) (DC) 8.5 cubic feet (240 L) (AC) Prime mover GE 7FDL16 (P40DC, P42DC), GE 7FDL12 (P32AC-DM) RPM range 200-1050 (600-900 while supplying HEP) Engine type 45° V16, four stroke cycle (P40DC, P42DC), 45° V12, four stroke cycle (P32AC-DM) Aspiration Turbocharged Displacement 175.2 liters (10,690 cu in) (7FDL16) 131.4 liters (8,020 cu in) (7FDL12) Alternator GMG 195 (P40DC, P42DC) GMG 195A1 (P32AC-DM) Traction motors GE 752AH (DC), GE GEB15 (AC) Cylinders 16 (P40DC, P42DC) 12 (P32AC-DM) Cylinder size 10.95 liters (668 cu in)[1] Transmission AC-DC MU working Yes Train heating Locomotive-supplied head-end power Loco brake Dynamic / Regenerative / Electropneumatic Train brakes Electropneumatic
Performance figures Maximum speed 103 mph (166 km/h) (original P40DC) 110 mph (177 km/h) (P42DC, P32AC-DM, upgraded P40DC) 60 mph (97 km/h) (in electric mode; P32AC-DM only)[2] Power output 3,200 hp (2,400 kW) (P32AC-DM) 4,000 hp (3,000 kW) (original P40DC) 4,250 hp (3,170 kW) (upgraded P40DC, P42DC) Tractive effort P40DC, P42DC: 280.25 kN (63,000 lbf) Starting 169 kN (38,000 lbf) Continuous @38 mph (61.2 km/h)[3] P32AC-DM: 275.8 kN (62,000 lbf) Starting @ Stall to 14 mph (23 km/h) 113.43 kN (25,500 lbf) Continuous @64 mph (103 km/h)[4] Factor of adh. 4.25 (DC) 4.4258 (AC)
Career Operators Amtrak, Metro-North Railroad, Via Rail, CT Rail Numbers Amtrak: P42DC 1-207; P32AC-DM 700-717; P40DC 800-843 (15 in service, 12 sold) Metro-North: P32AC-DM 201-231 VIA Rail Canada: P42DC 900-920 CT Rail: P40DC 6700–6711 Official name Genesis Disposition Operational

General Electric Genesis (officially trademarked GENESIS^[5]) is a series of passenger diesel locomotives produced by GE Transportation, then a subsidiary of General Electric. Between 1992 and 2001, a total of 321 units were built for Amtrak, Metro-North, and Via Rail.

The Genesis series of locomotives was designed by General Electric in response to a specification published by Amtrak. At 14 feet 4 inches (4.37 m) tall, the Genesis series are the lowest North American diesel-electric locomotives, being lower than the previous-generation F40PH by 14 inches (356 mm). This height restriction allows the locomotive to travel easily through low-profile tunnels in the Northeast Corridor.

Technical design

The GE Genesis series is unique among recently manufactured North American passenger locomotives in that it uses a single, monocoque carbody design styled by industrial designer Cesar Vergara,^[6] thus making it lighter, more aerodynamic,^[7] and more fuel efficient than its predecessors (F40PH, F59PH, P30CH, P32-BWH). However, this makes it more costly and time-consuming to maintain and repair. In 2004, Amtrak started installing bolt-on nose cones on its units for easy replacement in the event of a grade crossing collision with a vehicle. As an example of the improvements over the predecessor locomotives, the Genesis is 22% more fuel-efficient than the F40PH while producing 25% more power.^[8] In addition, all Genesis locomotives have four-stroke engines instead of the two-stroke engines previously used in EMD counterparts.

The Genesis unit is a fully computerized locomotive which automatically controls all on-board functions, thus producing high reliability while keeping the maintenance requirements low. For example, its computers can automatically reduce the power plant's output in the event that the locomotive is overheating, or suffering from low oil pressure, low water pressure, or reduced airflow into the intakes, thus making it still operable.^[8]

All Genesis engines can provide head-end power (HEP) to the train drawn from an alternator or inverter powered by the main engine at a maximum rating of 800 kilowatts (1,100 hp), making each unit capable of providing HEP for up to 16 Superliner railcars. The P40DC and P42DC power plants can supply 60-hertz head-end power either from the HEP alternator with the engine speed-locked to 900 rpm (normal mode) or from the traction alternator with the engine speed-locked to 720 rpm (standby mode). In the latter case, traction power is unavailable. The P32AC-DM powerplant does not have to be locked at a certain rpm because it utilizes an HEP inverter, which allows the prime mover to run at 1047 rpm when providing both traction power and HEP, and to idle at 620 rpm (or notch three) while still providing HEP for lighting and air-conditioning when not providing traction power.

The trucks of Genesis locomotives were made by Krupp Verkehrstechnik, which has since been absorbed by Siemens Mobility; the trucks on the newest Genesis locomotives carry the Siemens name.

Models

Three models of Genesis were built by General Electric, the P40DC, P42DC, and P32AC-DM.

P40DC

New Jersey Transit #4800 on the Raritan Valley Line in 2008

The P40DC (GENESIS Series I)^[9] or Dash 8-40BP (originally known as the AMD-103 or Amtrak Monocoque Diesel - 103MPH) is the first model in the Genesis series, built in 1993.^[10] The locomotive operates in a diesel-electric configuration that uses DC to power the traction motors, producing 4,000 horsepower (2,980 kW) at 1047 rpm. Power output to the traction motors is 3,550 hp (2,650 kW) when running in HEP mode (900 rpm) with a 0 kW HEP load. Traction power in HEP mode decreases to 2,525 horsepower (1,880 kW) when providing the maximum 800 kW (1,100 hp) HEP load to the train. The P40DC is geared for a maximum speed of 103 miles per hour (166 km/h). The P40DC was succeeded in 1996 by the P42DC.

A feature unique to the P40DC and P32AC-DM is a hostler stand at the rear of the locomotive providing increased visibility and reversing capabilities to the engineer while conducting reverse operations. When a unit is in operation from this stand it is limited to 10 mph (16 km/h) and a dead man's switch protects against movement without an operator being present. Another unique feature to the original P40DC were the two strobes above the cab and an emergency flasher between the strobes. When they were overhauled, those features were removed.^[8]

Both the P40DC and P42DC allowed Amtrak to operate heavy long-distance trains with fewer locomotives compared to the older EMD F40PH locomotives; two P40DCs could do the same work as three F40PHs. Additional deliveries of the P42DC ended up replacing the P40DCs. Three units were wrecked (819 in the 1993 Big Bayou Canot train wreck and 807 and 829 in the 1999 Bourbonnais, Illinois, train crash) and scrapped. Eight were leased and later sold to the Connecticut DOT for Shore Line East in 2005, and four were rebuilt and sold to New Jersey Transit in 2007; NJ Transit sold their units to ConnDOT in 2015. The remaining 29 units were placed out-of-service for many years. 15 of these units have been rebuilt using 2009 ARRA stimulus funds and returned to service, now in the Phase V livery, except for 822, which is painted in Phase III Heritage livery for Amtrak's 40th Anniversary.^[11] The units that were not rebuilt or sold have since been scrapped.

In January 2018, ConnDOT awarded a contract to Amtrak to overhaul their twelve P40DC locomotives at the Beech Grove Shops.^[12] The first unit was completed in early 2021.^[13] With the introduction of M8 EMU trains for Shore Line East service, the rebuilt P40DCs will be exclusively used on the Hartford Line.

Upgraded and "Stimulus" P40DCs

Amtrak P40DC #824 on the Pennsylvanian

By 2007, New Jersey Transit had upgraded their P40DC units with updated prime movers to match the 4,250 horsepower (3,170 kW) of the successor P42DC.^[14] This was done by readjusting the position of the lay shafts within the prime mover.

Amtrak has returned 15 of their P40DC units to service as part of a project funded through the American Recovery and Reinvestment Act of 2009.^[15] The first of the units were returned to service in March 2010 after being overhauled at the Beech Grove Shops. They were upgraded like NJT's units had been a few years before to have 4,250 hp (3,170 kW) and match the P42DC's maximum speed of 110 mph (177 km/h). They also received updated cab signaling systems. The upgraded locomotives still have mechanical air brakes, which makes them most suitable for trains that only require a single locomotive. This differs from the electronic air brakes on the P42DC and P32AC-DM.^[16] They also feature a builder's plate indicating that they were rebuilt under the auspices of the TIGER stimulus program.

P42DC

Via Rail P42DC #902

The P42DC (GENESIS Series I)^[17] is the successor model to the P40DC. It has an engine output of 4,250 horsepower (3,170 kW) at 1,047 rpm, or 3,550 horsepower (2,650 kW) when running in HEP mode (900 rpm) with a 0 kW HEP load. as with the P40DC, traction horsepower in HEP mode decreases to 2,525 horsepower (1,880 kW) when providing the full 800 kW HEP load to the train.

The P42DC has a maximum speed of 110 mph (177 km/h) compared to the 103 mph (166 km/h) maximum speed of the P40DC. Tractive effort is rated at 280.25 kN (63,000 lbf) of starting effort and 169 kN (38,000 lbf) of continuous effort at 38 mph (61 km/h) given wheel power of 3,850 horsepower (2,870 kW).^[3]

P42DCs are used primarily on most of Amtrak's long-haul and higher-speed rail service outside the Northeast and lower Empire Corridors. They will be replaced on long-distance service by 125 Siemens ALC-42 Charger locomotives between 2021 and 2024, but will remain in service on shorter corridor trains.^[18]

Via Rail Canada has utilized P42DC locomotives since 2001, when they replaced the LRC locomotives that year. They are currently on services with speeds up to 100 mph (161 km/h), mainly on the Quebec City-Windsor rail corridor.^[19]

P32AC-DM

Metro-North P32AC-DM #207 in 2007

The P32AC-DM (GENESIS Series II, short for "Passenger, 3,200 hp (2,400 kW), Alternating Current, Dual Mode")^[20] was developed for both Amtrak and Metro-North. They can operate on power generated either by the on-board diesel prime mover or power collected from a third rail electrification system at 750 volts direct current; the third-rail shoes are used on the over-running third-rail into Penn Station for Amtrak units and the under-running third-rail into Grand Central Terminal for Metro-North. The P32AC-DM is rated at 3,200 horsepower (2,390 kW), 2,900 horsepower (2,160 kW) when supplying HEP, and is geared for a maximum speed of 110 mph (177 km/h). Tractive effort is rated at 275.8 kN (62,000 lbf) of starting effort from zero to 14 mph (23 km/h) and 113.43 kN (25,500 lbf) of continuous effort at 40 mph (64 km/h) given wheel power of 2,700 horsepower (2,010 kW).^[4]

The P32AC-DM is unique as it is equipped with GE's GEB15 AC (alternating current) traction motors, rather than DC (direct current) motors as used in the other subtypes.^[21] It is also only one of two modern American electro-diesel locomotives with third-rail capability, along with the EMD DM30AC operated by the Long Island Rail Road. NJ Transit and Exo's Bombardier ALP-45DP electro-diesel locomotive can operate from overhead catenary electrification.

The P32AC-DM is only used on services operating north from New York City, where diesel emissions through its two fully enclosed main terminal stations are prohibited. Amtrak rosters 18 P32AC-DM locomotives and uses them for its Empire Service, Ethan Allen Express, Lake Shore Limited (New York section), Adirondack, and Maple Leaf services, all of which travel to New York Penn Station. Metro-North rosters 31 P32AC-DM locomotives on push-pull trains to Grand Central Terminal; four are owned by the Connecticut Department of Transportation.

In December 2020, the Metropolitan Transportation Authority of New York board approved a Federal Transit Administration-funded $335 million contract for 27 dual-mode locomotives, based on the Siemens Charger design. The new dual mode locomotives will replace the 27 existing P32AC-DM locomotives used on Metro-North's Hudson Line, Harlem Line, and Danbury Branch; they will use third rail electric power whenever available, instead of only in Manhattan. The order includes additional options for up to 144 more locomotives, which includes 32 additional for use by Metro-North, 20 for the New York State Department of Transportation (for Amtrak Empire Service trains), and 20 for the Connecticut Department of Transportation.^[22][23] In June 2023, the MTA board approved purchase of an option order of six additional units on behalf of ConnDOT, which will replace the four existing P32AC-DM locomotives in the Metro-North equipment pool and allow for service increases on the Danbury and Waterbury branches.

Original owners

See also

• List of Amtrak rolling stock
• EMD F40PH

References

Wikimedia Commons has media related to GE Genesis locomotives.