PL/0 is a programming language, intended as an educational programming language, that is similar to but much simpler than Pascal, a general-purpose programming language. It serves as an example of how to construct a compiler. It was originally introduced in the book, Algorithms + Data Structures = Programs, by Niklaus Wirth in 1976. It features quite limited language constructs: there are no real numbers, very few basic arithmetic operations and no control-flow constructs other than "if" and "while" blocks. While these limitations make writing real applications in this language impractical, it helps the compiler remain compact and simple.

Features

All constants and variables used must be declared explicitly.

The only data types are integers. The only operators are arithmetic and comparison operators. There is an odd function that tests whether the argument is odd.

In the original implementation presented by Wirth, there are no input and output routines. The new value of each variable is printed compiler prints as it changes. So the program:

var i, s;
begin
  i := 0; s := 0;
  while i < 5 do
  begin
    i := i + 1;
    s := s + i * i
  end
end.

gives the output:

          0
          0
          1
          1
          2
          5
          3
         14
          4
         30
          5
         55

However, most implementations have single input and single output routines.

Flow control structures are if-then and while-do constructs and user-defined procedures. Procedures cannot accept parameters.

Grammar

The following is the syntax rules of the model language defined in EBNF:

program = block "." ;

block = [ "const" ident "=" number {"," ident "=" number} ";"]
        [ "var" ident {"," ident} ";"]
        { "procedure" ident ";" block ";" } statement ;

statement = [ ident ":=" expression | "call" ident 
              | "?" ident | "!" expression 
              | "begin" statement {";" statement } "end" 
              | "if" condition "then" statement 
              | "while" condition "do" statement ];

condition = "odd" expression |
            expression ("="|"#"|"<"|"<="|">"|">=") expression ;

expression = [ "+"|"-"] term { ("+"|"-") term};

term = factor {("*"|"/") factor};

factor = ident | number | "(" expression ")";

It is rather easy for students to write a recursive descent parser for such a simple syntax. Therefore, the PL/0 compiler is still widely used in courses on compiler construction throughout the world. Due to the lack of features in the original specification, students usually spend most of their time with extending the language and their compiler. They usually start with introducing REPEAT .. UNTIL and continue with more advanced features like parameter passing to procedures or data structures like arrays, strings or floating point numbers.

Use in education

The main article on compilers honours PL/0 for introducing several influential concepts (stepwise refinement, recursive descent parsing, EBNF, P-code, T-diagrams) to the field by educating students to use these concepts. Over the last 3 decades, most university courses on compiler construction that used PL/0 have followed Wirth strictly in employing these techniques (see references below). Some years ago university courses deviated from the course set by Wirth with the replacement of the classical recursive descent parsing technique by a (nonetheless classical) Unix-like approach of employing lex and yacc. Only recently an implementation (PL/0 Language Tools) along this way has also combined modern concepts like object-orientation and design patterns with a modern scripting language (Python), allowing students to consume the source text of the implementation in a contemporary programming style.

Compiler construction

In December 1976, Wirth wrote a small booklet about compiler construction, containing the full source code of the PL/0 compiler. The syntax rules above were taken from this first edition of Wirth's book Compilerbau.[1] In later editions of this book (under the influence of his ongoing research) Wirth changed the syntax of PL/0. He changed the spelling of keywords like const and procedure to uppercase. This change made PL/0 resemble Modula-2 more closely. At the same time, Wirth's friend and collaborator C. A. R. Hoare was working on his influential communicating sequential processes concept, which used the exclamation mark ! and the question mark ? to denote communication primitives. Wirth added both symbols to the PL/0 language, but he did not mention their semantics in the book.

Examples

This program[2] outputs the squares of numbers from 1 to 10. Most courses in compiler construction today have replaced the exclamation mark with the WriteLn procedure.

VAR x, squ;

PROCEDURE square;
BEGIN
   squ:= x * x
END;

BEGIN
   x := 1;
   WHILE x <= 10 DO
   BEGIN
      CALL square;
      ! squ;
      x := x + 1
   END
END.

This following program prints the prime numbers from 1 to 100. The write statement corresponds to '!' statement in the EBNF syntax above.

const max = 100;
var arg, ret;

procedure isprime;
var i;
begin
	ret := 1;
	i := 2;
	while i < arg do
	begin
		if arg / i * i = arg then
		begin
			ret := 0;
			i := arg
		end;
		i := i + 1
	end
end;

procedure primes;
begin
	arg := 2;
	while arg < max do
	begin
		call isprime;
		if ret = 1 then write arg;
		arg := arg + 1
	end
end;

call primes
.

The following example was taken from the second edition of Wirth's book Compilerbau,[1] which appeared in 1986 in Germany.

VAR x, y, z, q, r, n, f;

PROCEDURE multiply;
VAR a, b;
BEGIN
  a := x;
  b := y;
  z := 0;
  WHILE b > 0 DO
  BEGIN
    IF ODD b THEN z := z + a;
    a := 2 * a;
    b := b / 2
  END
END;

PROCEDURE divide;
VAR w;
BEGIN
  r := x;
  q := 0;
  w := y;
  WHILE w <= r DO w := 2 * w;
  WHILE w > y DO
  BEGIN
    q := 2 * q;
    w := w / 2;
    IF w <= r THEN
    BEGIN
      r := r - w;
      q := q + 1
    END
  END
END;

PROCEDURE gcd;
VAR f, g;
BEGIN
  f := x;
  g := y;
  WHILE f # g DO
  BEGIN
    IF f < g THEN g := g - f;
    IF g < f THEN f := f - g
  END;
  z := f
END;

PROCEDURE fact;
BEGIN
  IF n > 1 THEN
  BEGIN
    f := n * f;
    n := n - 1;
    CALL fact
  END
END;

BEGIN
  ?x; ?y; CALL multiply; !z;
  ?x; ?y; CALL divide; !q; !r;
  ?x; ?y; CALL gcd; !z;
  ?n; f := 1; CALL fact; !f
END.

Oberon-0

In the third and last edition of his book on compiler construction, Wirth replaced PL/0 with Oberon-0. The language Oberon-0 is much more complex than PL/0. For example, Oberon-0 offers arrays, records, type declarations and procedure parameters. The publisher of Wirth's books (Addison-Wesley) has decided to phase out all his books, but Wirth has published revised editions of his book beginning in 2004.[3] As of August 2017, the most recent revision available is from May 2017.[4][5]

See also

Notes

  1. 1 2 Wirth, 1986
  2. ↑ PL/0 Archived 2012-02-21 at the Wayback Machine
  3. ↑ The revised third edition Archived 2017-02-17 at the Wayback Machine (2005) of Compiler Construction, Niklaus Wirth, 1996, ISBN 0-201-40353-6 has never seen the printing press, but it is available online.
  4. ↑ Wirth, Niklaus (2017-05-28). "Compiler Construction". Retrieved 2017-08-25.
  5. ↑ Wirth, Niklaus (2017-08-18). "news.txt". Archived from the original on 2017-08-25. Retrieved 2017-08-25.

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.