Paulton Halt
General information
LocationPaulton, Somerset
England
Coordinates51°19′02″N 2°29′52″W / 51.3171°N 2.4978°W / 51.3171; -2.4978
Platforms1
Other information
StatusDisused
History
Original companyGreat Western Railway
Key dates
1914Opened
1915Closed
1923Reopened
1925Closed

Paulton Halt railway station was on the Camerton branch of the Great Western Railway in Somerset, England. It was in use from 1914 until 1925, however it was closed for 8½ of these 12 years due to World War I.

History

The Bristol and North Somerset Railway (B&NSR) opened a branch line from Hallatrow to Camerton on 1 March 1882, although it had been funded by the Great Western Railway (GWR) which worked the trains on the line from the outset and purchased the B&NSR Company in 1884.[1] The line was extended from Camerton to Limpley Stoke in 1910 where it made a connection with the GWR's Wilts, Somerset and Weymouth Line.[2]

There was no station between Hallatrow and Camerton until Radford and Timsbury Halt was opened at the same time as the line was opened through to Limpley Stoke,[2] and on 5 January 1914 Paulton Halt itself was opened.[3] The term 'halt' was used by the GWR to denote railway stations without staff or goods facilities.

Passenger services had only been calling for a little over a year when, on 22 March 1915, they were withdrawn from the line due to the war. They were eventually restored on 9 July 1923, four and a half years after hostilities had ceased. They did not last long as they were withdrawn again on 21 September 1925, never to be resumed.[4] Freight trains continued to operate through the station until 8 February 1932 and the track was lifted shortly afterwards.[5]

Description

The stone-built platform was situated on the north side of the line, 1.5 miles (2.4 km) from Hallatrow at a place known as Gossard's Bridge; the Cam Brook was on the south side of the line opposite the platform. It was 150 feet (46 m) long, 8 feet (2.4 m) wide and 3 feet (0.91 m) high. Three oil lamps were provided and a plan suggests that a shelter was intended, but no photographic evidence of it exists. Access was by a footpath from the Paulton to High Littleton road that crossed the line at the east end of the station on a bridge.[6][3]

In 2010 a portion of the platform edge still stood, as did the access path and some railway fencing.[7]

Services

Passenger trains on the Hallatrow to Limpley Stoke line were operated by steam railmotors or, later, by auto trains. In 1914 there were five trains each day, Monday to Saturday only. In 1923 this had been reduced to just four.[8]

Preceding station Historical railways Following station
Hallatrow   Great Western Railway
Camerton branch
  Radford and Timsbury Halt

References

  1. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. pp. 11–14. ISBN 0-906867-25-8.
  2. 1 2 Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. p. 30. ISBN 0-906867-25-8.
  3. 1 2 Oakley, Mike (2006). Somerset Railway Stations. Bristol: Redcliffe Press. p. 94. ISBN 1-904537-54-5.
  4. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. pp. 32–33. ISBN 0-906867-25-8.
  5. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. p. 101. ISBN 0-906867-25-8.
  6. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. p. 44. ISBN 0-906867-25-8.
  7. Oakley, Mike (2011). Somerset Stations Then and Now. Wimborne Minster: The Dovecote Press. p. 130. ISBN 978-1-904349-94-5.
  8. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. pp. 107–108. ISBN 0-906867-25-8.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.