Category | Formula One | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Constructor | Racing Point | ||||||||||
Designer(s) | Andrew Green (Technical Director) Akio Haga (Chief Designer) Ian Hall (Chief Designer) Bruce Eddington (Chief Engineer, Composites) Dan Carpenter (Chief Engineer, Mechanical Design) Andrew Brown (Head of R&D) Jonathan Marshall (Head of Vehicle Science) Guru Johl (Chief Aerodynamicist) | ||||||||||
Predecessor | Force India VJM11 | ||||||||||
Successor | Racing Point RP20 | ||||||||||
Technical specifications[1] | |||||||||||
Chassis | Carbon fibre composite monocoque with Zylon legality side anti-intrusion panels. | ||||||||||
Suspension | Aluminium uprights with carbon fibre composite wishbones, trackrod and pushrod. Inboard chassis mounted torsion springs, dampers and anti-roll bar assembly. | ||||||||||
Length | 5,600 mm (220 in) | ||||||||||
Width | 2,000 mm (79 in) | ||||||||||
Engine | Mercedes M10 EQ Power+ (rebadged as BWT Mercedes) 1.6 L (98 cu in) direct injection V6 turbocharged engine limited to 15,000 RPM in a mid-mounted, rear-wheel drive layout | ||||||||||
Electric motor | Mercedes kinetic and thermal energy recovery systems | ||||||||||
Weight | 743 kg (1,638 lb) | ||||||||||
Fuel | Petronas | ||||||||||
Lubricants | Ravenol | ||||||||||
Brakes | 920E brake calipers and in house design brake by wire system with carbon fibre discs and pads | ||||||||||
Tyres | Pirelli P Zero (Dry/Slick) Pirelli Cinturato (Wet/Treaded) | ||||||||||
Clutch | AP Racing | ||||||||||
Competition history | |||||||||||
Notable entrants | SportPesa Racing Point Formula One Team | ||||||||||
Notable drivers |
| ||||||||||
Debut | 2019 Australian Grand Prix | ||||||||||
Last event | 2019 Abu Dhabi Grand Prix | ||||||||||
|
The Racing Point RP19 is a Formula One racing car designed and developed by the Racing Point F1 Team, to compete in the 2019 Formula One World Championship.[1] It is the first car built by Racing Point after their purchase of the Force India Formula One Team assets in August 2018. The RP19 was driven by Sergio Pérez and Lance Stroll and made its competitive debut at the 2019 Australian Grand Prix.[2]
Complete Formula One results
(key)
Year | Entrant | Engine | Tyres | Drivers | Grands Prix | Points | WCC | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AUS | BHR | CHN | AZE | ESP | MON | CAN | FRA | AUT | GBR | GER | HUN | BEL | ITA | SIN | RUS | JPN | MEX | USA | BRA | ABU | |||||||
2019 | SportPesa Racing Point Formula One Team | BWT Mercedes | P | Pérez | 13 | 10 | 8 | 6 | 15 | 12 | 12 | 12 | 11 | 17 | Ret | 11 | 6 | 7 | Ret | 7 | 8 | 7 | 10 | 9 | 7 | 73 | 7th |
Stroll | 9 | 14 | 12 | 9 | Ret | 16 | 9 | 13 | 14 | 13 | 4 | 17 | 10 | 12 | 13 | 11 | 9 | 12 | 13 | 19† | Ret |
† Driver failed to finish the race, but was classified as they had completed over 90% of the winner's race distance.
References
- 1 2 "Discover our car - the RP19". www.racingpoint.com. Archived from the original on 15 February 2019. Retrieved 13 February 2019.
- ↑ "2019 FIA Formula One World Championship Entry List". Federation Internationale de l'Automobile. Retrieved 13 February 2019.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.