Scheldt-Rhine Canal
The Scheldt-Rhine canal
CountryThe Netherlands
Specifications
Length32 kilometres (19.9 miles; 17.3 nautical miles)
Lock length320 m (1,050 ft) [1]
Lock width24 m (79 ft)
Maximum boat length225 m (738 ft) [2]
Maximum boat beam23.5 m (77.1 ft)
Maximum boat draft4.3 m (14.1 ft)
Maximum boat air draft9.1 m (30 ft)
(due to fixed bridges)
Original number of locks2 parallel
Statusoperational
History
Construction began1963
Date completed1975
Geography
Start pointPort of Antwerp, Belgium
End pointVolkerak at Rhine-Meuse Delta, Netherlands
Beginning coordinates51°21′0.72″N 4°18′2.88″E / 51.3502000°N 4.3008000°E / 51.3502000; 4.3008000
Ending coordinates51°38′3.84″N 4°14′16.44″E / 51.6344000°N 4.2379000°E / 51.6344000; 4.2379000
Kreekrak sluices 2012-07-21

The Scheldt–Rhine Canal (Schelde-Rijnkanaal) in Belgium and the Netherlands connects Antwerp with the Volkerak, and thereby the Scheldt with the Rhine.[3]

Route

The canal starts close to the Scheldt river, at the port of Antwerp, and generally runs north. After it passes the Dutch-Belgian border, it serves as the border between the Dutch provinces of North Brabant and Zeeland. Just north of Zuid-Beveland ships have to pass the Kreekrak sluices to enter the lower part of the canal. Just north of the sluices the canal enters the artificial Zoommeer and leaves this lake again as a canalised section of the former Eendracht strait, before terminating in the Volkerak estuary. Here, the Volkerak sluices provide access to the Rhine-Meuse Delta and the port of Rotterdam.

History

During the 1920s the Belgian government demanded a replacement for the Canal through Zuid-Beveland, to keep the port of Antwerp accessible for the lucrative Rhine trade. According to the original plan, the new canal was supposed to connect Antwerp directly to Moerdijk on the Hollands Diep, but after the Second World War and the North Sea flood of 1953 the Dutch government decided that the new canal should be part of the Delta Works and proposed a more westerly route, in fact it would take the same route as the ancient Striene river. After the Belgian government agreed in 1963, work on the canal began.

In order to keep the canal free of tides, two dams were built to separate the tidal Oosterschelde from the Scheldt-Rhine canal. These are the Oesterdam (resulting in the creation of the Zoommeer) and the Philipsdam (that turned the Volkerak estuary into a freshwater lake).

Bridges

It crosses the east of Zuid-Beveland, where it is crossed by a railroad bridge (between the stations Rilland-Bath on the west and Bergen op Zoom on the east) and three road bridges, and along Tholen, where it is spanned by three road bridges.

References

  1. Ministry of Infrastructure and Water Management
  2. Dutch "Vaarwegen in Nederland" Ministry of Infrastructure and Water Management
  3. "Schelde-Rijnkanaal" (in Dutch). Rijkswaterstaat. Archived from the original on 2014-10-27.

Map 51°27′07″N 4°13′48″E / 51.452°N 4.23°E / 51.452; 4.23

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.