A Shinyo suicide motorboat being tested by Lt Col James F. Doyle USA commanding officer 2nd Battalion, 305th Infantry 69th Division
Class overview
NameShin'yō-class suicide motorboat
BuildersYokosuka Naval Arsenal
OperatorsEmpire of Japan Imperial Japanese Navy
SubclassesShinyo Type 1, Shinyo Type 5
BuiltApril 1944–June 1945
In commissionAugust 1944–August 1945
Planned11,300
Completed6,197
LostAt least 36
General characteristics
Class and typeMotorboat
Displacement
  • Type 1: 1.35 t (1.33 long tons)
  • Type 5: 2.2 t (2.2 long tons)
Speed
  • Type 1: 26 knots (48 km/h; 30 mph)
  • Type 5: 30 knots (56 km/h; 35 mph)
CrewType 1: 1, Type 5: 2
Armament
  • Bow-mounted Type 98 high explosive charge of 270 kg (600 lb)
  • Two 120 mm (4.7 in) anti-ship rockets mounted on launchers
A Japanese Shinyo suicide motorboat, 1945

The Shinyo (震洋, Shin'yō, "Sea Quake") were Japanese suicide motorboats developed during World War II. They were part of the wider Japanese Special Attack Units program.

History

Towards the end of 1943, in response to unfavorable progress in the war, the Japanese high command heard suggestions for various suicide craft. These suggestions were initially rejected as "defeatist" but later deemed necessary.[1] For the naval department this meant kamikaze planes, kaiten submarines, fukuryu suicide divers or human mines, and shinyo suicide boats.

Characteristics

These fast motorboats were driven by one man, to speeds of around 55 km/h (30 kn). They were typically equipped with a bow-mounted charge of up to 300 kg (660 lb) of explosives that could be detonated by either impact or from a manual switch in the driver's area. These attack boats also carried two anti-ship rockets mounted on launchers located on either side of the boat behind the driver.

The similar Maru-Ni, which were used by the Imperial Japanese Army, were equipped with two depth charges, and were not actually suicide boats, as the idea was to drop the depth charges and then turn around before the explosion took place. Although the chances of the boat and crew surviving the wave from the explosion might seem slim, a small number of crewmen successfully escaped.[2] The depth charges used were known as the Experimental Manufacture Use 120 kg Depth Charge, and were armed by a delayed-action pull igniter.

The program began in March 1944. The first vessels were tested on 27 May, after which it was decided that the original steel hull design would be replaced by a wooden hull due to the Japanese steel shortage. On 1 August, 150 students, on average 17 years old, elected to begin training for the Shinyo.[3]

6,197 Shinyo boats were produced for the Imperial Japanese Navy and 3,000 Maru-ni for the Imperial Japanese Army.[4] Around 400 boats were transported to Okinawa and Formosa, and the rest were stored on the coast of Japan for the ultimate defense against the expected invasion of the Home islands. The main operative use took place during the Philippines Campaign of 1944–45.

Operational results

See also

References

  1. ↑ Japanese suicide craft. US Navy. 1946.
  2. ↑ Morison, Samuel Eliot (1959). History of United States Naval Operations in World War II: The Liberation of the Philippines. University of Illinois Press. pp. 138–140. ISBN 0-252-07064-X.
  3. ↑ Hackett, Robert; Kingsepp, Sander (26 November 2011). "Battle Histories of Japan's Explosive Motorboats". www.combinedfleet.com. Retrieved 2019-03-13.
  4. ↑ Japanese Suicide Weapons

Bibliography

  • Wilterding, John H. Jr. (2006). "Re: Mystery Photo 158". Warship International. XLIII (1): 41–43. ISSN 0043-0374.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.