Structure of titanium disilicide (Ti = white spheres).

A silicide is a type of chemical compound that combines silicon and a usually more electropositive element.

Silicon is more electropositive than carbon. In terms of their physical properties, silicides are structurally closer to borides than to carbides. Because of size differences however silicides are not isostructural with borides and carbides.[1]

Bonds in silicides range from conductive metal-like structures to covalent or ionic. Silicides of all non-transition metals have been described except beryllium. Silicides are used in interconnects.[2]

Structure

Silicon atoms in silicides can have many possible organizations:

  • Isolated silicon atoms: electrically conductive (or semiconductive) CrSi, MnSi, FeSi, CoSi, Cu5Si, (V,Cr,Mn)3Si, Fe3Si, Mn3Si, Mg2(Si,Ge,Sn,Pb), (Ca,Ru,Ce,Rh,Ir,Ni)2Si
  • Si2 pairs: U3Si2, hafnium and thorium silicides
  • Si4 tetrahedra: KSi, RbSi, CsSi
  • Sin chains: USi, (Ti, Zr, Hf, Th, Ce, Pu)Si, CaSi, SrSi, YSi
  • Planar hexagonal graphite-like Si layers: β-USi2, silicides of other lanthanoids and actinoids
  • Corrugated hexagonal Si layers: CaSi2
  • Open three-dimensional Si skeletons: SrSi2, ThSi2, α-USi2

Preparation and reactivity

Most silicides are produced by direct combination of the elements.[1]

A silicide prepared by a self-aligned process is called a salicide. This is a process in which silicide contacts are formed only in those areas in which deposited metal (which after annealing becomes a metal component of the silicide) is in direct contact with silicon, hence, the process is self-aligned. It is commonly implemented in MOS/CMOS processes for ohmic contacts of the source, drain, and poly-Si gate.

Alkali and alkaline earth metals

Group 1 and 2 silicides e.g. Na2Si and Ca2Si react with water, yielding hydrogen and/or silanes.

Magnesium silicide reacts with hydrochloric acid to give silane:

Mg2Si + 4 HCl → SiH4 + 2 MgCl2

Group 1 silicides are even more reactive. For example, sodium silicide, Na2Si, reacts rapidly with water to yield sodium silicate, Na2SiO3, and hydrogen gas. Rubidium silicide is pyrophoric, igniting in contact with air.[3]

Transition metals and other elements

The transition metal silicides are usually inert to aqueous solutions. At red heat, they react with potassium hydroxide, fluorine, and chlorine. Mercury, thallium, bismuth, and lead are immiscible with liquid silicon.

Applications

Silicide thin films have applications in microelectronics because of their large silicon content, high electrical conductivity, high temperature stability, and corrosion resistance.[4]

List (incomplete)

See also

References

  1. 1 2 Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 335-336. ISBN 978-0-08-037941-8.
  2. ↑ Schlesinger, Mark E. (1990). "Thermodynamics of solid transition-metal silicides". Chemical Reviews. 90 (4): 607–628. doi:10.1021/cr00102a003.
  3. ↑ Rubidium ampoule opened IN AIR for chemical reactions (Video). ChemicalForce. 22 Feb 2020. Event occurs at 10:51. Archived from the original on 2021-12-21. Retrieved 2020-02-23.
  4. ↑ Murarka, Shayam (1995). "Silicide thin films and their applications in microelectronics". Intermetallics. 3 (3): 173–186. doi:10.1016/0966-9795(95)98929-3. Retrieved 26 July 2023.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.