A spherical roller thrust bearing

A spherical roller thrust bearing is a rolling-element bearing of thrust type that permits rotation with low friction, and permits angular misalignment. The bearing is designed to take radial loads, and heavy axial loads in one direction. Typically these bearings support a rotating shaft in the bore of the shaft washer that may be misaligned in respect to the housing washer. The misalignment is possible due to the spherical internal shape of the house washer.[1]

Construction

Spherical roller thrust bearings consist of a shaft washer (for radial bearings often called "inner ring"), a housing washer (for radial bearings often called "outer ring"), asymmetrical rollers and a cage.[2] There are also bearing units available that can take axial loads in two directions.

History

The spherical roller thrust bearing was introduced by SKF in 1939.[3] The design of the early bearings is similar to the design that is still in use in modern machines.

Designs

Section view of a spherical roller thrust bearing

The internal design of the bearing is not standardised by ISO, so it varies between different manufacturers and different series. Some of the design parameters are:

  • Roller shape and dimensions
  • Flange design
  • Non-rotational notches in house washer

The spherical roller thrust bearings have the highest load rating density of all thrust bearings.[4]

Dimensions

External dimensions of spherical roller bearings are standardised by ISO in the standard ISO 104:2015. [5] Some common series of spherical roller bearings are:

  • 292
  • 293
  • 294

Materials

Bearing rings and rolling elements can be made of a number of different materials, but the most common is "chrome steel", a material with approximately 1.5% chrome content. Such "chrome steel" has been standardized by a number of authorities, and there are therefore a number of similar materials, such as: AISI 52100 (USA), 100CR6 (Germany), SUJ2 (Japan) and GCR15 (China).[6]

Some common materials for bearing cages:[7]

The choice of material is mainly done by the manufacturing volume and method. For large-volume bearings, cages are often of stamped sheet-metal, whereas low volume series often have cages of machined brass or machined steel.

Manufacturers

Some manufacturers of spherical roller bearings are SKF, Schaeffler, Timken Company and NSK Ltd.

Applications

Spherical roller thrust bearings are used in industrial applications, where there are heavy axial loads, moderate speeds and possibly misalignment. Some common application areas are:[4]

See also

References

  1. ↑ "Misalignment". SKF. Retrieved 5 December 2013.
  2. ↑ SKF Spherical roller thrust bearings (PDF). SKF. 2010.
  3. ↑ "Early history". SKF. Archived from the original on 16 November 2015. Retrieved 17 December 2013.
  4. 1 2 "Why Spherical roller thrust bearings" (PDF). 6548/1. SKF. Retrieved 17 December 2013.
  5. ↑ "Dimensions". SKF. Retrieved 5 December 2013.
  6. ↑ "Bearing materials". AST Bearings. Retrieved 5 December 2013.
  7. ↑ "Cage materials". SKF. Retrieved 5 December 2013.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.