Stripping ratio

In surface mining, stripping ratio or strip ratio refers to the amount of waste (or overburden) that must be removed to release a given ore quantity.^[1]^[2] It is a number or ratio that express how much waste is mined per unit of ore. The units of a stripping ratio can vary between mine types. For example, in coal mining the stripping ratio is commonly referred to as volume/weight.^[3], whereas in metal mining, stripping ratio is unitless and is expressed as weight/weight.^[2] A stripping ratio can be expressed as a ratio or as a number.

Equations

The equations for stripping ratio are,

for coal:

{\frac {Overburden(volume)}{Coal(volume)}}

for metal:

{\frac {Waste(weight)}{Ore(weight)}}

where volume is typically expressed as m³ or yd and weight is typically expressed as tonne or ton.

Use

It is common for the stripping ratio to be used as an indicator of economic value for an open pit mine.^[1] This is because removal of waste is a cost to the mine whereas mining ore leads to revenue. A stripping ratio is commonly used as a quick method to evaluate a mine’s or a design’s value. High stripping ratios are not desired because they are indicating that large amounts of waste must be moved to access ore.

References

1 2 Runge, Ian C. (Ian Charles), 1952- (1998). Mining economics and strategy. Littleton, CO: Society for Mining, Metallurgy, and Exploration. p. 188. ISBN 978-1-61344-104-6. OCLC 742590272.{{cite book}}: CS1 maint: multiple names: authors list (link) CS1 maint: numeric names: authors list (link)
1 2 Hustrulid, W. A. Open pit mine planning & design. Kuchta, Mark,, Martin, Randall K. (Revised and extended 3rd ed.). Boca Raton, Fla. p. 392. ISBN 978-1-4665-7512-7. OCLC 815365897.
↑ SME mining engineering handbook. Darling, Peter, 1956-, Society for Mining, Metallurgy, and Exploration (U.S.) (3rd ed.). [Englewood, Colo.]: Society for Mining, Metallurgy, and Exploration. 2011. p. 1016. ISBN 978-0-87335-264-2. OCLC 694679184.{{cite book}}: CS1 maint: others (link)

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[:0-1] 1 2 Runge, Ian C. (Ian Charles), 1952- (1998). Mining economics and strategy. Littleton, CO: Society for Mining, Metallurgy, and Exploration. p. 188. ISBN 978-1-61344-104-6. OCLC 742590272.{{cite book}}: CS1 maint: multiple names: authors list (link) CS1 maint: numeric names: authors list (link)

[:1-2] 1 2 Hustrulid, W. A. Open pit mine planning & design. Kuchta, Mark,, Martin, Randall K. (Revised and extended 3rd ed.). Boca Raton, Fla. p. 392. ISBN 978-1-4665-7512-7. OCLC 815365897.

[3] SME mining engineering handbook. Darling, Peter, 1956-, Society for Mining, Metallurgy, and Exploration (U.S.) (3rd ed.). [Englewood, Colo.]: Society for Mining, Metallurgy, and Exploration. 2011. p. 1016. ISBN 978-0-87335-264-2. OCLC 694679184.{{cite book}}: CS1 maint: others (link)

[1]

[2]

[3]

Equations

Use

See also

References