Taki Dam
Taki Dam is located in Japan
Taki Dam
Location of Taki Dam in Japan
LocationTadami
Coordinates37°23′13″N 139°23′02″E / 37.38694°N 139.38389°E / 37.38694; 139.38389
Construction began1959
Opening date1961
Owner(s)Electric Power Development Company
Dam and spillways
Type of damConcrete gravity
ImpoundsTadami River
Height46 m (151 ft)
Length264 m (866 ft)
Dam volume120,343 m3 (157,403 cu yd)
Spillway capacity200 m3/s (7,063 cu ft/s)
Reservoir
Total capacity27,000,000 m3 (21,889 acre⋅ft)
Active capacity10,300,000 m3 (8,350 acre⋅ft)
Catchment area1,978 km2 (764 sq mi)
Surface area2.30 km2 (1 sq mi)
Power Station
Commission date1961
Hydraulic head35.82 m (118 ft)
Turbines2 x 46 MW Kaplan-type
Installed capacity92 MW[1]

Taki Dam (滝ダム) is a gravity dam on the Tadami River, 7.3 km (5 mi) east of Tadami in Fukushima Prefecture, Japan. Surveys for the dam were carried out in 1958, construction began in 1959 and the dam was complete in 1961. The primary purpose of the dam is hydroelectric power generation and it supports a 92 MW power station consisting of 2 x 46 MW Kaplan turbines. The dam is 46 m (151 ft) tall and 264 m (866 ft) long. It creates a reservoir with a 27,000,000 m3 (21,889 acre⋅ft) capacity, of which 10,300,000 m3 (8,350 acre⋅ft) is active (or "useful") for power generation. The dam's spillway is controlled by four sluice gates and has a 200 m3/s (7,063 cu ft/s) discharge capacity.[2]

See also

References

  1. "Falls Power Station Power Development" (in Japanese). Suiryoku. Retrieved 16 August 2011.
  2. "Case Study 15-02: Others – Use of Driftwood in Reservoir – Taki Dam, Japan" (PDF). IEA Hydropower Implementing Agreement Annex VIII -. New Energy Foundation. 2006. Archived from the original (PDF) on 3 October 2011. Retrieved 15 August 2011.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.