Tecma FX
Role Hang glider
National origin France
Manufacturer Tecma Sport
Status Production completed
Produced mid-2000s

The Tecma FX is a French high-wing, single-place, hang glider that was designed and produced by Tecma Sport of La Roche-sur-Foron. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.[1]

Design and development

The FX is made from aluminum tubing, with the double-surface wing covered in Dacron sailcloth. Its wing is cable braced from a single kingpost. The nose angle is 130° for both models.[1]

The models are each named for their wing area in square metres and decimals of square metres.[1]

Variants

FX 136
Small-sized model for lighter pilots. Its 10.3 m (33.8 ft) span wing is cable braced from a single kingpost. The nose angle is 130°, wing area is 13.6 m2 (146 sq ft) and the aspect ratio is 7.8:1. The pilot hook-in weight range is 60 to 80 kg (132 to 176 lb).[1]
FX 142
Large-sized model for heavier pilots. Its 10.6 m (34.8 ft) span wing is cable braced from a single kingpost. The nose angle is 130°, wing area is 14.2 m2 (153 sq ft) and the aspect ratio is 7.9:1. The pilot hook-in weight range is 75 to 90 kg (165 to 198 lb). The glider model is DHV certified.[1]

Specifications (FX 136)

Data from Bertrand[1]

General characteristics

  • Crew: one
  • Wingspan: 10.3 m (33 ft 10 in)
  • Wing area: 13.6 m2 (146 sq ft)
  • Aspect ratio: 7.8:1

References

  1. 1 2 3 4 5 6 Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 50. Pagefast Ltd, Lancaster OK, 2003. ISSN 1368-485X
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.