Falco
Role Single seat intermediate performance glider
National origin Italy
Designer Luigi Teichfuss
First flight 1931
Number built 2

The Teichfuss Falco (English: Falcon) was an Italian single-seat, intermediate-performance glider, designed by Luigi Teichfuss and flown in 1931.

Design and development

The Falco was designed as a glider with performance better than that of a trainer though not at a soaring competition level. It was a high-wing monoplane, with its single spar wing braced on each side by a pair of faired struts arranged in a V, joining the lower fuselage to the outer end of the central panel at about one-third span. This central panel was rectangular in plan and without dihedral. The outer panels were straight-tapered to blunt tips, the wing becoming thinner and thus acquiring dihedral though retaining a horizontal upper surface. Ailerons occupied the whole trailing edges of these outer panels; there were no inboard flaps or air brakes.[1]

Its wood-framed, plywood-skinned fuselage was deep-sided and hexagonal in cross section, tapering markedly towards the tail. The wing was mounted on a pedestal which continued only briefly behind the wing. The pilot's open cockpit was immediately ahead of the pedestal and below the wing leading edge. There was no fixed tailplane; instead the Falco had a single-piece, all-moving elevator with a straight leading edge and a semi-elliptical trailing edge. There was a small triangular fin which supported a much larger, tall balanced rudder, essentially triangular in shape but with rounded vertices. Hinged above the elevator trailing edge, which had a cut-out for its movement, the rudder extended down to the keel, where it was protected by a small, faired tail bumper. There was a long landing skid with rubber shock absorbers, running from near the nose to under the aft end of the wing pedestal.[1]

The Falco first flew in 1931. Two were built; one was lost in a crash.

Specifications

Data from Pedrielli (2011) pp.36-7[1]

General characteristics

  • Capacity: One
  • Length: 7.06 m (23 ft 2 in)
  • Wingspan: 16 m (52 ft 6 in)
  • Height: 1.44 m (4 ft 9 in) [2]
  • Wing area: 18.60 m2 (200.2 sq ft)
  • Aspect ratio: 14
  • Empty weight: 155 kg (342 lb)
  • Gross weight: 240 kg (529 lb)

Performance

  • Maximum glide ratio: estimated 21.5:1
  • Rate of sink: 0.65 m/s (128 ft/min) minimum[2]
  • Wing loading: 12.9 kg/m2 (2.6 lb/sq ft)

See also

Related lists

References

  1. 1 2 3 Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 36–7. ISBN 9783980883894.
  2. 1 2 "Teichfuss Falco". Retrieved 19 November 2013.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.