Triumph Daytona 600
Triumph Daytona 600
ManufacturerTriumph
Production2002–2004
SuccessorTriumph Daytona 650
ClassSport bike
Engine599 cc (36.6 cu in), liquid-cooled
Bore / stroke68.0 mm × 41.3 mm (2.68 in × 1.63 in)
Compression ratio12.5:1
Power110.00 hp (82.03 kW) @ 12750 rpm
Torque50.2 lbf⋅ft (68.1 N⋅m) @ 11,000 rpm
Transmission6-speed, manual chain drive
SuspensionFront:
BrakesFront: Double disc 308 mm
Rear: Disc 220 mm
TyresFront: 120/70 R17 ZR
Rear: 180/55 R17 ZR
Wheelbase1,390 mm (55 in)
DimensionsL: 2,050 mm (81 in)
W: 660 mm (26 in)
H: 1,135 mm (44.7 in)
Seat height815 mm (32.1 in)
Weight165 kg (364 lb) (dry)
Fuel capacity18.0 litres (4.0 imp gal; 4.8 US gal)
RelatedTriumph Daytona 955i

The Triumph Daytona 600 is a name given to two different motorcycles.

The first model was sport bike manufactured in 1983 by Triumph Motorcycles out of their Meriden factory that was claimed to do over 100 miles per hour but fell within a lower insurance price bracket than the preceding 650cc Triumph TR65 Thunderbird in order to attract younger buyers. Although simply a shorter-stroked, twin-carburettored version of their earlier 650 cc Triumph TR65 Thunderbird but with an 8.5:1 compression ratio, it was exhibited as a new model for their 1983 range at the 1982 motorcycle show at the National Exhibition Centre. Unique for that year's home market models, it featured rear set foot rests and a plastic 'ducktail' rear end over the short chromed rear mudguard from the Triumph T140 TSX. Although, sporting a front disc brake, the model retained the drum rear brake of the TR65 Thunderbird.[1][2]

Two prototypes were made, one electric start version for the press and shows, the other a kick start version for factory road-testing; the latter, the only one left after the Meriden factory closed in 1983, was, from 2010, displayed at the London Motorcycle Museum.[3]

The new Triumph company based at Hinckley, which was started after the original Triumph company went into administration, has made a far better known and more numerous Daytona 600. It is powered by a liquid-cooled 599 cc (36.6 cu in) four-cylinder in-line engine and was superseded by the Daytona 650 from 2005.[4]

1983 prototype 600cc Daytona made by Triumph's Meriden factory now on display at the London Motorcycle Museum
Triumph 600 Daytona

See also

References

  1. Guide Lines(Cycle Guide 6/83)
  2. Daytona Return ! Motor Cycle News (02.03.83)
  3. Rosamond, John (2009). Save The Triumph Bonneville! The Inside Story Of The Meriden Workers' Co-Op. Veloce. ISBN 978-1845842659.
  4. Motorbikes today Daytona 600 review


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.