Uranyl acetate
Uranyl acetate

Hydrated crystal structure
Names
IUPAC name
Uranium bis((acetato)-O)dioxo-dihydrate
Other names
Uranyl ethanoate; Uranyl acetate dihydrate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.007.971
EC Number
  • (anhydrous): 208-767-5
UNII
  • (anhydrous): InChI=1S/2C2H4O2.2O.U/c2*1-2(3)4;;;/h2*1H3,(H,3,4);;;
    Key: IXSMFXMQHOBORU-UHFFFAOYSA-N
  • (dihydrate): InChI=1S/2C2H4O2.2H2O.2O.U/c2*1-2(3)4;;;;;/h2*1H3,(H,3,4);2*1H2;;;/q;;;;;;+2/p-2
    Key: VVAHPLNXWRLLIG-UHFFFAOYSA-L
  • (anhydrous) ionic form (anhydrate): O=C(C)[O-].[O+]#[U]#[O+].O=C(C)[O-]
  • (dihydrate): CC(=O)[O-].CC(=O)[O-].O.O.O=[U+2]=O
  • coordination dimer (hydrate): O0[C-](C)O[U+6]01(=[O-2])(=[O-2])([OH2])O[C-](C)O[U+6]2(O[C-](C)O2)(=[O-2])(=[O-2])([OH2])O[C-](C)O1
  • coordination dimer (anhydrous): O0[C-](C)O[U+6]01(=[O-2])(=[O-2])O[C-](C)O[U+6]0(O[C-](C)O0)(=[O-2])(=[O-2])O[C-](C)O1
Properties
UO2(CH3COO)2 (anhydrous)
UO2(CH3COO)2·2H2O (dihydrate)
Molar mass 424.146 g/mol (dihydrate)
Appearance yellow-green crystals (dihydrate)
Density 2.89 g/cm3 (dihydrate)
Melting point decomposes at 80 °C (dihydrate)
7-8 g/100 ml
Solubility slightly soluble in ethanol[1]
Hazards
GHS labelling:
GHS06: ToxicGHS08: Health hazardGHS09: Environmental hazard
Danger
H300, H330, H373, H411
P260, P264, P270, P271, P273, P284, P301+P310, P304+P340, P310, P314, P320, P321, P330, P391, P403+P233, P405, P501
Safety data sheet (SDS) External MSDS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)
Infobox references

Uranyl acetate is the acetate salt of uranium oxide, a toxic yellow-green powder useful in certain laboratory tests. Structurally, it is a coordination polymer with formula UO2(CH3CO2)2(H2O)·H2O.

Structure

In the polymer, uranyl (UO22+) centers are bridged by acetate ligands. The remainder of each (heptacoordinate) coordination sphere is provided by an aquo ligand and a bidentate acetate ligand. One water of crystallization occupies the lattice.[2]

Uses

Uranyl acetate is extensively used as a negative stain in electron microscopy.[3] Most procedures in electron microscopy for biology require the use of uranyl acetate. Negative staining protocols typically treat the sample with 1% to 5% aqueous solution. Uranyl acetate staining is simple and quick to perform and one can examine the sample within a few minutes after staining. Some biological samples are not amenable to uranyl acetate staining and, in these cases, alternative staining techniques and or low-voltage electron microscopy technique may be more suitable.

1% and 2% uranyl acetate solutions are used as an indicator, and a titrant in stronger concentrations in analytical chemistry, as it forms an insoluble salt with sodium (the vast majority of sodium salts are water-soluble). Uranyl acetate solutions show evidence of being sensitive to light, especially UV, and will precipitate if exposed.

Uranyl acetate is also used in a standard test—American Association of State Highway and Transportation Officials (AASHTO) Designation T 299—for alkali-silica reactivity in aggregates (crushed stone or gravel) being considered for use in cement concrete.

Uranyl acetate dihydrate has been used as a starting reagent in experimental inorganic chemistry.[4]

Uranyl carboxylates are known for diverse carboxylic acids (formate, butyrate, acrylate).[5]

Safety

Uranyl acetate is both chemically toxic and mildly radioactive. Chronic-exposure effects may cumulate.

In general, uranium salts exhibit nephrotoxicity. Normal commercial stocks from depleted uranium have typical specific activity 0.37–0.51 microcuries per gram (14–19 kBq/g), too weak to harm from outside the body. However, uranyl acetate is very toxic if ingested, inhaled as dust, or absorbed through cut or abraded skin.

Microbiologists have developed a number of alternative stains:[6] neodymium acetate,[7][8] platinum blue,[9] hafnium chloride,[10] and oolong tea extracts.[11][12]

References

  1. Lide, David R. (1998), Handbook of Chemistry and Physics (87 ed.), Boca Raton, FL: CRC Press, pp. 3–566, ISBN 0-8493-0594-2
  2. Howatson, J.; Grev, D.M.; Morosin, B. (1975). "Crystal and molecular structure of uranyl acetate dihydrate". Journal of Inorganic and Nuclear Chemistry. 37 (9): 1933–1935. doi:10.1016/0022-1902(75)80918-3.
  3. "Negative Staining" University of Oxford
  4. Sessler, Jonathan L.; Seidel, Daniel; Vivian, Anne E.; Lynch, Vincent; Scott, Brian L.; Keogh, D. Webster (2001). "Hexaphyrin(1.0.1.0.0.0): An Expanded Porphyrin Ligand for the Actinide Cations Uranyl (UO22+) and Neptunyl (NpO2+)". Angewandte Chemie International Edition. 40 (3): 591–594. doi:10.1002/1521-3773(20010202)40:3<591::AID-ANIE591>3.0.CO;2-0.
  5. Klepov, Vladislav V.; Vologzhanina, Anna V.; Alekseev, Evgeny V.; Pushkin, Denis V.; Serezhkina, Larisa B.; Sergeeva, Olga A.; Knyazev, Aleksandr V.; Serezhkin, Viktor N. (2016). "Structural diversity of uranyl acrylates". CrystEngComm. 18 (10): 1723–1731. doi:10.1039/C5CE01957E.
  6. Yamaguchi K, Suzuki K, Tanaka K (2010) Examination of electron stains as a substitute for uranyl acetate for the ultrathin sections of bacterial cells. J Electron Microsc (Tokyo) 59:113–118
  7. Kuipers, Jeroen; Giepmans, Ben N. G. (1 April 2020). "Neodymium as an alternative contrast for uranium in electron microscopy". Histochemistry and Cell Biology. 153 (4): 271–277. doi:10.1007/s00418-020-01846-0. ISSN 1432-119X. PMC 7160090. PMID 32008069.
  8. Hosogi N, Nishioka H, Nakakoshi M (2015) Evaluation of lanthanide salts as alternative stains to uranyl acetate. Microscopy (Oxf) 64:429–435
  9. Inaga S, Katsumoto T, Tanaka K, Kameie T, Nakane H, Naguro T (2007) Platinum blue as an alternative to uranyl acetate for staining in transmission electron microscopy. Arch Histol Cytol 70:43–49
  10. Ikeda K, Inoue K, Kanematsu S, Horiuchi Y, Park P (2011) Enhanced effects of nonisotopic hafnium chloride in methanol as a substitute for uranyl acetate in TEM contrast of ultrastructure of fungal and plant cells. Microsc Res Tech 74:825–830
  11. Sato S, Adachi A, Sasaki Y, Ghazizadeh M (2008) Oolong tea extract as a substitute for uranyl acetate in staining of ultrathin sections. J Microsc 229:17–20
  12. He X, Liu B (2017) Oolong tea extract as a substitute for uranyl acetate in staining of ultrathin sections based on examples of animal tissues for transmission electron microscopy. J Microsc 267:27–33
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.