Tomáš Enge in a Lola T96/50 F3000 chassis in 1998.

The Lola T96/50 is an open-wheel formula race car chassis developed by British manufacturer Lola, for use in the International Formula 3000 series, a feeder-series for Formula One, between 1996 and 1998 (1999 for Italian F3000), until it was replaced by the new Lola B99/50 chassis for the new in 1998. Similar chassis', dubbed the Lola T96/51 and Lola T96/52, were used in the Japanese Formula Nippon series until 1999, and were powered by 3.0 L (180 cu in) Mugen V8 engines.[1]

Specifications[2]

  • Engine displacement: Cosworth DFY/Zytek-Judd KV F3000 3.0 L (183 cu in) DOHC V8[3]
  • Power output: 450–460 hp (336–343 kW) @ 9,000 rpm
  • Torque output: 276–290 lb⋅ft (374–393 N⋅m) @ 6,900 rpm
  • Compression ratio: 13.6:1
  • Bore: 88–89 mm (3.5–3.5 in)
  • Stroke: 60.2–61.5 mm (2.4–2.4 in)
  • Engine weight: 120 kg (265 lb)
  • Gearbox: 5-speed sequential manual gearbox + reverse
  • Weight: 540 kg (1,190 lb) (including driver)
  • Fuel: 102 RON unleaded
  • Fuel delivery: Zytek Electronic-indirect fuel injection
  • Aspiration: Naturally-aspirated
  • Front Track Width: 1,708 mm (67 in)
  • Rear Track Width: 1,594 mm (63 in)
  • Wheelbase: 2,819 mm (111 in)
  • Length: 4,405 mm (173 in)
  • Steering: Non-assisted rack and pinion

References

  1. "Lola Heritage". Retrieved 20 May 2022.
  2. "Italian Formula 2 - Lola T96/50 Technical Specifications". Retrieved 20 May 2022.
  3. "JUDD KV V8 F3000 Zytek Racing Engine". juddpower.com. November 10, 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.