Highway 1

Map of Queensland with Highway 1 highlighted in red
General information
TypeHighway
Length2,964 km (1,842 mi)
Opened1955
Route number(s)
  • National Route 1 (NT border to Cairns)
  • A1 (Cairns to Kybong)
  • M1 (Kybong to NSW border)
Major junctions
Northwest endQLD/NT border near Wollogorang
 
Southeast endQLD/NSW border near Coolangatta
Highway system

In Queensland, Highway 1 is a 2,964-kilometre (1,842 mi) long[1] route that crosses the state, from the Northern Territory (NT) border near Wollogorang to Cairns, and then travels along the coastline to the New South Wales (NSW) border near Coolangatta. Highway 1 continues around the rest of Australia, joining all mainland state capitals, and connecting major centres in Tasmania. All roads within the Highway 1 system are allocated a road route numbered 1, M1, A1, or B1, depending on the state route numbering system. In Queensland, the highway is designated as National Route 1 from the NT border to Cairns, Route A1 from Cairns to Kybong, and then Route M1 down to the NSW border.

History

Highway 1 was created as part of the National Route Numbering system, adopted in 1955. The route was compiled from an existing network of state and local roads and tracks.[2]

Route description

The Savannah Way is the largely unsignposted route for Highway 1 between the Northern Territory border and Normanton. From there, it follows the Gulf Developmental Road, Kennedy Highway and Captain Cook Highway to Cairns. Highway 1 then travels southwards along the Queensland Coast along Bruce Highway to Brisbane. The highway travels through Brisbane as the Gateway Motorway, and continues south as the Pacific Motorway, towards the Gold Coast, and subsequently, the New South Wales border.[1]

The following sections, which are freeways or dual carriageways, are designated as route M1:

Development of the M1

With the completion of Section C of the Bruce Highway - Cooroy to Curra upgrade project (Traveston to Woondum) in February 2018[4] the M1 has now been extended to Kybong, 10 kilometres (6.2 mi) south of Gympie. The Bruce Highway from Kybong to Gympie remains signed as A1. Section D of the project (Woondum to Curra, including a bypass of Gympie)[5] will, when completed, become the next stage of the M1.


Note: While the references use Woondum as a designator for sections of the project the new intersection that marks the end of the M1 is wholly within the locality of Kybong, although bordered on two sides by Woondum.[6][7]

Major intersections

References

  1. 1 2 Google (20 March 2013). "Highway 1 (Queensland)" (Map). Google Maps. Google. Retrieved 20 March 2013.
  2. Taylor, David (2012). The Highway One travel companion. Volume 1, Melbourne to Tweed Heads. Salisbury, Queensland: Boolarong Press. p. 9. ISBN 9780987218902. Archived from the original on 6 October 2016. Retrieved 20 March 2013.
  3. The Tugun Bypass was opened for traffic in June 2008.
  4. "Bruce Highway - Cooroy to Curra, Section C: Traveston to Woondum". Queensland Government. 9 March 2018. Retrieved 17 March 2018.
  5. "Bruce Highway (Cooroy to Curra)". Queensland Government. 9 March 2018. Retrieved 17 March 2018.
  6. "Woondum, QLD 4570". Whereis Maps. Retrieved 18 March 2018.
  7. "Kybong, Queensland 4570". Google Maps. 2018. Retrieved 18 March 2018.

See also

Template:Attached KML/Highway 1 (Queensland)
KML is from Wikidata
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.