Coronado 25
Development
DesignerEd Edgar and Frank W. Butler
LocationUnited States
Year1966
Builder(s)Coronado Yachts
Russell Marine
RoleCruiser
NameCoronado 25
Boat
Displacement4,500 lb (2,041 kg)
Draft3.67 ft (1.12 m)
Hull
Typemonohull
Constructionfiberglass
LOA25.00 ft (7.62 m)
LWL20.05 ft (6.11 m)
Beam8.00 ft (2.44 m)
Engine typeoutboard motor
Hull appendages
Keel/board typefin keel
Ballast2,150 lb (975 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height31.50 ft (9.60 m)
J foretriangle base9.00 ft (2.74 m)
P mainsail luff27.75 ft (8.46 m)
E mainsail foot11.90 ft (3.63 m)
Sails
Sailplanmasthead sloop
Mainsail area165.11 sq ft (15.339 m2)
Jib/genoa area141.75 sq ft (13.169 m2)
Total sail area306.86 sq ft (28.508 m2)
Racing
PHRF231

The Coronado 25 is an American trailerable sailboat that was designed by Ed Edgar and Frank W. Butler as a cruiser and first built in 1966.[1][2][3][4]

Production

The design was built by Coronado Yachts in the United States from 1966 to 1975. It was also built by Russell Marine in the United Kingdom, but it is now out of production.[1][4][5][6]

Design

The Coronado 25 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig; a spooned, raked stem; a raised counter, angled transom; an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel of stub keel and centerboard.[1][4]

The boat is normally fitted with a small 6 to 10 hp (4 to 7 kW) outboard motor for docking and maneuvering.[1][4]

The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin, a dinette table that lowers into a double berth in the main cabin and an aft quarter berth on the port side. The galley is located on the port side just forward of the companionway ladder. The galley is equipped with a two-burner stove, an icebox and a sink. The head is located just aft of the bow cabin on the starboard side. Cabin headroom is 66 in (170 cm).[1][4]

The design has a hull speed of 6.0 kn (11.1 km/h).[4]

Variants

Coronado 25
This fix fin keel model displaces 4,500 lb (2,041 kg) and carries 2,150 lb (975 kg) of lead ballast. The boat has a draft of 3.67 ft (1.12 m) with the standard keel. The boat has a PHRF racing average handicap of 231.[1][4]
Coronado 25 CB
This centerboard model displaces 4,300 lb (1,950 kg) and carries 1,800 lb (816 kg) of ballast. The boat has a draft of 4.50 ft (1.37 m) with the centerboard down and 2.50 ft (0.76 m) with it retracted. The boat has a PHRF racing average handicap of 231.[2][4]

Operational history

In a 2010 review Steve Henkel wrote that the design was, "in the vanguard of early fiberglass designs".[4]

See also

References

  1. 1 2 3 4 5 6 McArthur, Bruce (2020). "Coronado 25 sailboat". sailboatdata.com. Archived from the original on 9 March 2021. Retrieved 9 March 2021.
  2. 1 2 McArthur, Bruce (2020). "Coronado 25 CB sailboat". sailboatdata.com. Archived from the original on 9 March 2021. Retrieved 9 March 2021.
  3. โ†‘ McArthur, Bruce (2021). "Frank W. Butler 1928 - 2020". sailboatdata.com. Archived from the original on 9 February 2021. Retrieved 9 March 2021.
  4. 1 2 3 4 5 6 7 8 9 Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 338. International Marine/McGraw-Hill, 2010. ISBN 978-0-07-163652-0
  5. โ†‘ McArthur, Bruce (2021). "Coronado Yachts 1964 - 1976". sailboatdata.com. Archived from the original on 7 March 2021. Retrieved 9 March 2021.
  6. โ†‘ McArthur, Bruce (2021). "Russell Marine Ltd. 1959 - 1980". sailboatdata.com. Archived from the original on 10 December 2020. Retrieved 9 March 2021.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.